VIEW THIS AS

Auto mode follows the Route Engine until you choose a viewpoint.

YOU ARE HERE

ROUTE CHECK

CONNECTED TO

WHAT NEXT

Use the canonical route for this room, or HELP if you are unsure.

Average Speed: Why Total Distance Must Be Divided by Total Time

Three learners review open books together at a classroom table, with stacks of textbooks, stationery and a whiteboard in the bright room.

A car travels 120 km at 60 km/h and returns the same 120 km at 80 km/h.

What is the average speed for the whole journey?

A tempting answer is:

(60+80)÷2 = 70 km/h.

That answer is wrong.

Average speed is defined by the whole journey: total distance divided by total relevant time. The listed speeds are not averaged directly unless the time weights make that arithmetic mean valid.

The core definition

Average speed = total distance ÷ total time.

For the return journey:

Outward time:

120÷60 = 2 h.

Return time:

120÷80 = 1.5 h.

Total distance:

240 km.

Total time:

3.5 h.

Average speed:

240÷3.5 ≈ 68.57 km/h.

Why 70 km/h fails

The car spends:

  • 2 hours at 60 km/h;
  • 1.5 hours at 80 km/h.

The slower speed acts for longer.

So the two speeds do not have equal time weight.

Average speed is a weighted average through time, but the safest school method is still total distance divided by total time.

Equal time is the special case where arithmetic mean works

Suppose a vehicle travels:

  • 1 hour at 60 km/h;
  • 1 hour at 80 km/h.

Distances:

  • 60 km;
  • 80 km.

Total distance=140 km.

Total time=2 h.

Average speed=140÷2=70 km/h.

Here the arithmetic mean works because the time intervals are equal.

Equal distance creates a different average

Suppose the same distance d is travelled at speeds a and b.

Total distance=2d.

Total time=d/a+d/b.

Average speed:

2d ÷ (d/a+d/b).

Simplify:

2ab/(a+b).

This is the harmonic mean of the two speeds for equal distances.

For a=60 and b=80:

2×60×80/(60+80)=9600/140≈68.57 km/h.

Average speed must lie between the stage speeds

If all stage speeds are positive and the journey consists only of those stages, the average speed should lie between the minimum and maximum stage speeds.

For 60 and 80 km/h:

68.57 is plausible.

An answer of 95 km/h would be impossible under those conditions.

This creates a strong reasonableness check.

Stops can lower whole-journey average speed

A bus travels 100 km in 2 h, stops for 30 min, then travels 50 km in 1 h.

Total distance=150 km.

If average speed is measured from departure to final arrival, total time includes the stop:

2+0.5+1=3.5 h.

Average speed=150÷3.5≈42.86 km/h.

If the question instead asks for average moving speed, the stop would normally be excluded:

150÷3=50 km/h.

The phrase “total time” must match the journey interval defined by the question.

Average speed versus average velocity

Speed uses total distance.

Velocity uses displacement with direction.

On a complete return journey to the starting point:

  • total distance is positive;
  • displacement is zero.

So average speed is positive while average velocity over the full return interval is zero.

This distinction becomes especially important when mathematics connects to physics.

Worked example: three stages with different times

A van travels:

  • 30 min at 40 km/h;
  • 1 h at 60 km/h;
  • 90 min at 80 km/h.

Convert times to hours:

  • 0.5 h;
  • 1 h;
  • 1.5 h.

Distances:

  • 40×0.5=20 km;
  • 60×1=60 km;
  • 80×1.5=120 km.

Total distance=200 km.

Total time=3 h.

Average speed=66.67 km/h.

Weighted-average form when times are known

If speeds v₁, v₂, … apply for times t₁, t₂, …:

Total distance=v₁t₁+v₂t₂+…

Total time=t₁+t₂+…

Therefore:

average speed=(v₁t₁+v₂t₂+…)/(t₁+t₂+…).

This shows explicitly that speeds are weighted by the time spent at each speed.

Worked example: equal times

If t₁=t₂=t:

average=(v₁t+v₂t)/(2t).

Cancel t:

average=(v₁+v₂)/2.

This proves why arithmetic mean is valid for equal times.

Average speed from a distance–time graph

If a graph shows total distance travelled against elapsed time, whole-journey average speed is:

final total distance ÷ final elapsed time.

The slope of each segment gives stage speed.

The overall average is not the average of those slopes unless the time weights justify it.

Average speed from a speed–time graph

On a speed–time graph:

area under the graph gives distance travelled.

Total elapsed time is the horizontal interval.

So average speed is:

area under graph ÷ total time.

This connects average speed to the idea of average height of a graph over time.

Worked example: unknown speed from target average

A car travels 100 km at 50 km/h, then 100 km at speed x.

The whole-journey average speed is 60 km/h.

Total distance=200 km.

Total time required for average 60:

200÷60=10/3 h.

First-stage time:

100÷50=2 h.

Second-stage time:

10/3−2=4/3 h.

Therefore:

x=100÷(4/3)=75 km/h.

This is another example of working from the whole average back to a missing stage.

Why average speed can be closer to the slower speed

For equal distances, the slower stage takes longer.

Because time is the weighting variable, the slower speed receives more weight.

That is why the equal-distance average of 60 and 80 is about 68.57 rather than 70.

Do not average stage times either

Average speed requires totals.

Taking the average of stage times and combining it with total distance can create a quantity unrelated to the actual journey unless the structure is carefully justified.

Common misconception 1: average speed means average of speeds

Only in special weighting conditions, such as equal times.

Common misconception 2: equal distances give arithmetic mean

Equal distances generally give the harmonic-mean structure, not the arithmetic mean.

Common misconception 3: stops never count

They count if the averaging interval includes the full elapsed journey.

Common misconception 4: average speed can exceed every stage speed

Not for a positive-time mixture of those speeds alone.

Common misconception 5: return to starting point means average speed is zero

That confuses distance with displacement and speed with velocity.

A diagnostic ladder

  1. Can the learner state average speed as total distance ÷ total time?
  2. Can the learner separate stage distances and times?
  3. Can the learner handle equal-time cases?
  4. Can the learner handle equal-distance cases?
  5. Can the learner include or exclude stops according to the question?
  6. Can the learner distinguish speed from velocity?
  7. Can the learner use weighted-average reasoning?
  8. Can the learner interpret average speed from graphs?
  9. Can the learner solve reverse problems with an unknown stage speed?
  10. Can the learner check that the answer lies within plausible stage-speed bounds?

How this fits Secondary Mathematics

Average speed combines rates, weighted reasoning, algebra, units and graph interpretation. It is a useful example of why a familiar word such as “average” must be tied to the definition of the quantity being averaged.

Exact subject-level scope should be checked against the current MOE/SEAB Mathematics syllabus for the learner’s cohort.

The deeper lesson: averages belong to totals

A journey is built from stages, but the average describes the whole interval.

The safest route to average speed is to reconstruct the journey’s total distance and total relevant time, because those totals preserve the weights that a simple average of speeds can silently throw away.