Primary 6 Mathematics brings earlier learning together with the remaining content for the child’s course. Under the current MOE syllabus, Standard P6 includes ratio, algebra, circles, percentage change and average; Foundation follows its own progression, including percentage, triangle area, volume and average. Start with the official curriculum, the school’s topic plan and a recent independent work sample.
Standard and Foundation Mathematics have different curriculum and examination requirements. This guide focuses on the school year: what to revise, how to teach through an error, how to interpret preliminary feedback and how to build habits for secondary school. Its examples are original teaching suggestions. Use the relevant SEAB examination-year document for formal paper arrangements, and avoid treating a P6 school mark as a guaranteed PSLE outcome or school offer.
- Confirm the course: Standard ratio, algebra and circle work should not be imposed as Foundation P6 requirements.
- Read the current syllabus: the revised primary Mathematics programme reaches P6 from 2026; check older books against it.
- Revise earlier foundations: the P6 content list does not replace the number, fraction, measurement and reasoning skills learned before P6.
- Name every quantity: identify the whole, unit, comparison or dimension before choosing an operation.
- Use corrections to teach: locate the first wrong step, explain it and check the skill on a different question.
- Practise independence: reduce prompts, use timing for a clear purpose and follow the task’s calculator instructions.
- Keep the next stage in view: accurate representations, organised working and precise questions for teachers remain useful after PSLE.
For parents planning Primary 6 Mathematics learning. Curriculum and pathway information checked on 21 November 2026. Start with the child’s current schoolwork and teacher feedback.
Choose a reading route below or open the full chapter index. The examples and four-week plan can be adapted to the child’s readiness and the school’s current teaching sequence.
Find your next learning step
Choose the concern closest to your child today. Every chapter remains available below for a fuller reading.
Full chapter index
Choose the right course and repair foundations
Connect percentage, algebra, area and volume
Review evidence, plan support and choose the next school
- Rebuild the total when working with average
- Track changing quantities in a connected problem
- Use school and preliminary feedback to improve the next attempt
- A four-week revision cycle that checks transfer
- Carry usable mathematical habits into secondary school
- Connect Mathematics learning with PSLE scores and nearby school choices
- Frequently asked questions about Primary 6 Mathematics
- Sources and checking notes
The reference is the MOE Primary Mathematics Syllabus updated October 2025. Standard P6 content is on printed pages 43–44, and Foundation P6 content is on pages 49–50. The syllabus introduced with the 2021 P1 cohort applies to P6 from 2026. An older assessment book may organise topics differently.
Read the P6 pages together with the earlier learning they build on. A child who is uncertain about equivalent fractions may struggle with fraction division. A child who cannot distinguish area from perimeter may need that distinction repaired before working on a composite figure.
Three documents have three different jobs
- MOE syllabus: identifies curriculum content.
- The school’s current plan: explains teaching order, homework and school assessments.
- SEAB’s applicable examination-year document: specifies national examination requirements.
At the 21 November 2026 source check, the SEAB PSLE hub linked 2026 examination formats. This guide does not describe those documents as confirmed 2027 requirements. Follow SEAB and the school for the publication applying to your child’s year.
Valour Primary’s 2026 curriculum page provides separate Standard and Foundation P6 plans. It is a useful example of school-level organisation, not a timetable that every school must follow. Ask your own teacher what is current and what will be revised later.
Use the examples below to understand and practise relationships. They do not create a national list of compulsory question types or guarantee marks for a particular method. Follow any specific instruction supplied with the child’s task.
Standard and Foundation are primary subject levels. They identify different courses, with some shared ideas and some different content. They should not be replaced casually with secondary G1, G2 or G3 labels.
| Learning area | Standard P6 | Foundation P6 |
|---|---|---|
| Fractions | Fraction division, building on earlier operations. | Fractions as division and specified fraction-division work. |
| Percentage | Finding the whole; percentage increase and decrease. | Percentage of a whole and applications such as discount. |
| Ratio and algebra | Included. | Not listed in the Foundation P6 content. |
| Area and volume | Circle work and further cuboid/cube relationships. | Triangle area and cuboid/cube and tank volume. |
| Data | Average. | Pie-chart interpretation and average. |
The MOE document supplies the complete content. The table is a selected comparison, not a replacement for it. Earlier topics remain relevant to the child’s course and to connected problem solving.
Choose practice with a purpose
Before using a page, check the topic, course and task demands. A Foundation pupil should not be judged against an unfamiliar Standard algebra exercise and described as failing their own programme. A Standard pupil who needs help with a basic fraction relationship may still benefit from a simpler example.
The current Standard sequence places ratio and average in P6. Speed is not listed as a standalone topic in this syllabus. Do not import an older book’s topic checklist without comparing it with the current document and the school’s guidance. A context involving a rate should be interpreted according to the quantities and conditions actually supplied.
Keep the language around course choice respectful. Ask what the child can do, what support is needed and which next task will provide a suitable challenge. The course label is not a description of the child’s worth or the limits of future learning.
A total score can identify a concern, but the working underneath it tells you what to teach. Start with three representative questions: one the child completed independently, one that was partly correct and one where the child could not begin.
Ask the child to explain the quantities before discussing the answer. If the explanation is unclear, the difficulty may come before calculation. If the relationship is understood but one numerical step is wrong, isolate that operation and preserve the reasoning that was correct.
| What you see | Question to ask | Possible focus |
|---|---|---|
| Uses the wrong whole in percentage. | What quantity represents 100%? | Identify the reference quantity. |
| Finds a ratio part but not the requested amount. | What does one unit represent? | Connect units to actual quantities. |
| Chooses a sloping side as height. | Where is the perpendicular distance? | Read the geometry relationship. |
| Solves only with adult prompts. | Which decision still needs a cue? | Practise that decision independently. |
Record the help given. “Recognised the ratio after I drew the units” differs from “Drew the units and solved without help”. Both attempts have value, but they show different degrees of independence.
Choose a priority that can be taught
“Improve problem solving” is too broad for a short session. “Distinguish the original amount from the remaining amount” gives the session a clear purpose. Use an understandable example, explain the relationship and then try unfamiliar numbers.
Return to the idea after a gap. A child may remember a corrected answer immediately without being able to reconstruct the method later. A fresh task helps you decide whether to continue, simplify or extend the practice.
Fraction division becomes easier to interpret when the child knows what the divisor represents. Sometimes a quantity is shared among a number of recipients; sometimes we ask how many pieces of a specified size can be formed.
Worked example: sharing three quarters
There is 3/4 metre of ribbon to share equally among three children. Divide the available ribbon into three equal pieces. Each child receives 1/4 metre, so 3/4 ÷ 3 = 1/4.
Ask what the answer describes. It is the length received by each child. It is not three quarters of a metre for every child. Recombine the shares: three pieces of 1/4 metre give the original 3/4 metre.
Worked example: cutting eighth-metre pieces
Now ask how many pieces of length 1/8 metre can be cut from 3/4 metre of ribbon. Three quarters equals six eighths, so six pieces can be made. The calculation is 3/4 ÷ 1/8 = 6.
The answer is a number of pieces, not a length in metres. This example also shows why division does not always produce a smaller number: the question counts how many small units fit into the available amount.
Connect a procedure with its meaning
For 2/3 ÷ 4/5, rewrite both quantities in fifteenths: 10/15 divided by 12/15. The first quantity is 10/12, or 5/6, of the second quantity. Therefore, 2/3 ÷ 4/5 = 5/6. Check by multiplying 5/6 by 4/5 to obtain 2/3.
A reciprocal procedure can record the calculation efficiently once the relationship is understood. Avoid making “flip the second fraction” the child’s entire explanation. They should still know whether they are sharing a quantity or measuring it in units of another quantity.
The examples fit the fraction-division work specified for these P6 courses. Follow the task’s calculator instruction and keep the quantities manageable when teaching the concept. Increase numerical complexity only when the relationship remains clear.
This chapter develops Standard P6 ratio content. It is not a compulsory Foundation P6 topic. Begin with whole-number ratios and make clear which quantities are being compared.
Worked example: four red counters for every three blue counters
The ratio of red counters to blue counters is 4:3. There are 35 counters altogether. The ratio has seven units in total: four red units and three blue units. Each unit represents 35 ÷ 7 = 5 counters.
There are therefore 4 × 5 = 20 red counters and 3 × 5 = 15 blue counters. Check that 20 + 15 = 35 and that 20:15 simplifies to 4:3.
Ask which fraction of all counters is red. The answer is 4/7, because the whole consists of seven ratio units. The ratio 4:3 compares red with blue; it does not mean that red counters are 4/3 of the total.
Equivalent ratios preserve the comparison
4:3 and 8:6 describe the same comparison because both parts have been multiplied by two. By contrast, adding two to both parts gives 6:5, which changes the relationship.
Use a small counter model to show the difference. Two identical sets of four red and three blue produce eight red and six blue. Adding two red and two blue to a single set produces a different mixture.
Worked example: a three-part ratio
Sixty stickers are shared in the ratio 2:3:5. There are ten units altogether, so each unit represents six stickers. The shares are 12, 18 and 30. Their total is 60.
Ask the child to label each person’s share before calculating. Otherwise, a correct set of numbers can still be assigned to the wrong people.
When units of measurement differ, express the quantities in a common unit before comparing them. Follow the current syllabus’s whole-number ratio scope rather than introducing every advanced ratio procedure from an older resource. The essential habit is to state what one unit means and how the required quantity follows.
Percentage describes a part in relation to a whole treated as 100%. Before calculating, ask the child to name that whole. The correct arithmetic on the wrong reference quantity still answers the wrong question.
Foundation P6 example: a percentage of a known amount
A class has 80 activity cards, and 30% are blue. Ten per cent of 80 is eight, so 30% is 24. There are 24 blue cards.
Ask what the 80 represents: all the activity cards. Ask what the 24 represents: the blue cards. This connects the calculation to the original categories.
Standard P6 example: finding the whole
Forty per cent of a collection is 72 cards. To find the whole, notice that 10% is 72 ÷ 4 = 18 cards. Therefore, 100% is 18 × 10 = 180 cards.
Check that 40% of 180 is 72. A child who calculates 40% of 72 has taken a percentage of the known part instead of recovering the whole. Ask which number represents 100% before beginning again.
Standard P6 example: percentage increase
A quantity increases from 80 to 100. The increase is 20. Compared with the original 80, this is 20/80 × 100% = 25%. The percentage increase is 25%.
Using the new value of 100 as the denominator would give 20%, which describes a different comparison. The word “increase” alone does not identify the reference whole; the child must follow the relationship from the original amount.
Why reversing a percentage change needs care
Reducing $80 by 20% gives $64. Increasing $64 by 20% gives $76.80, not $80, because the second percentage is calculated from a different whole. This original example shows why the reference quantity matters.
For Foundation practice, prioritise the listed percentage-of-a-whole and application work. The reverse-percentage and percentage-change examples above are identified as Standard content so parents can choose suitable tasks.
Algebra is part of Standard P6. A letter can represent an unknown or varying number. Begin with the quantity represented by the letter before applying any procedure.
Worked example: a simple expression
Each ticket costs $4, and there is one booking fee of $3 for the whole purchase. If n tickets are bought, the total cost is 4n + 3 dollars. The fee is added once, not once for each ticket.
For five tickets, substitute n = 5. The total is 4 × 5 + 3 = $23. Ask what would change if the fee applied to each ticket instead. That would be a different situation and require a different expression.
Worked example: finding an unknown
If the total is $23, the equation is 4n + 3 = 23. Remove the $3 booking fee from both sides, giving 4n = 20. Divide both sides by four, giving n = 5.
Substitute the answer into the original expression: 4 × 5 + 3 = 23. This check connects the solution to the situation and helps the child detect an incorrect step.
Combine like quantities
In 3a + 2a + 4, the first two terms count the same kind of quantity, a. Together they make 5a, so the expression simplifies to 5a + 4. If a = 6, its value is 30 + 4 = 34.
Keep “simplify” distinct from “find the value”. The simplified expression still contains a letter; a numerical value needs a specified value of that letter.
Stay within the primary scope, including its exclusions, when selecting routine practice. Expanding brackets or introducing a large collection of secondary algebra rules is not necessary to explain these examples. The useful bridge to later Mathematics is precise notation and a reason for each valid step.
Area measures a region; perimeter measures its boundary. Ask the child to point to the feature being measured before choosing a formula. The unit should then match the quantity: square units for area and length units for perimeter.
Foundation P6 example: a triangle’s area
A triangle has base 12 cm and perpendicular height 7 cm. Its area is 1/2 × 12 × 7 = 42 cm². The height is the perpendicular distance to the chosen base or the line containing it. A sloping side is not automatically the height.
Turn the drawing and ask the child to identify the same relationship again. The area does not change because the page has been rotated. The right-angle relationship matters more than whether a line looks vertical.
Standard P6 example: a circle
A circle has radius 7 cm. In an exercise instructing the pupil to use 22/7 for π, its area is 22/7 × 7 × 7 = 154 cm². Its circumference is 2 × 22/7 × 7 = 44 cm.
The radius and diameter are different measurements. The diameter here is 14 cm. Substituting 14 as the radius would change both calculations incorrectly. Read the label in the task rather than assuming the displayed length is always a radius.
Standard P6 example: a semicircle’s perimeter
For a semicircle of radius 7 cm, using the same value of π, the curved boundary is half the full circumference: 22 cm. Its complete perimeter also includes the diameter of 14 cm, giving 36 cm.
A child who answers 22 cm has found the arc length but omitted the straight boundary. Trace the complete outside edge with a finger and identify each part to be included.
Use the value of π or rounding instruction given in the actual task. The chosen fraction in this example is an explicit condition, not a command to use it for every question. Circle work is Standard content; Foundation pupils should follow their own area and perimeter requirements.
Volume measures three-dimensional space. A cuboid can be understood as equal layers of unit cubes. This model explains why its length, width and height are multiplied.
Foundation P6 example: liquid in a rectangular tank
A tank has internal base dimensions of 15 cm by 8 cm. Water is 5 cm deep. The water volume is 15 × 8 × 5 = 600 cm³. This is 600 ml, or 0.6 litre.
Use the water depth rather than the full tank height. If the tank is taller than the water, multiplying by the full height would find its capacity instead of the current water volume.
Ask the child to identify each dimension and unit. A diagram can show the internal base and the water level. The formula is useful only after the relevant measurements have been selected.
Standard P6 example: recover a missing dimension
A cuboid has volume 972 cm³ and base area 108 cm². Its height is 972 ÷ 108 = 9 cm. Check by multiplying the base area by the height: 108 × 9 = 972.
The answer is a length, so the unit is centimetres. Writing 9 cm³ would confuse the missing dimension with the original volume. Ask what quantity the division has recovered.
Standard P6 example: find a cube’s edge
A cube has volume 343 cm³. Since 7 × 7 × 7 = 343, each edge is 7 cm. Taking 343 ÷ 3 would not work: the volume is a product of three equal lengths, not a sum of three lengths.
Keep the inverse-dimension examples distinct from the Foundation volume calculations specified for the course. Both can use unit-cube models, but the expected next task is not identical.
The current primary scope excludes conversion between cubic centimetres and cubic metres in the relevant volume work. Do not add such a conversion as an assumed routine requirement. Practise the relationships actually listed and the school’s assigned tasks.
Geometry work is easier to check when each calculation has a reason. Start by identifying the requested angle and the information that connects it with known angles. A picture’s appearance alone is insufficient, especially when it is not drawn to scale.
Worked example: an isosceles triangle
An isosceles triangle has an angle of 50° between its two equal sides. The other two angles are equal. Together they measure 180° − 50° = 130°, so each measures 65°.
The equal-side information is essential. If a triangle has one angle of 50° but no further relationship is given, the remaining angles cannot both be determined individually. Ask the child what information makes the equal split valid.
Worked example: two adjacent angles on a straight line
Two adjacent angles form a straight angle. One is 73°, so the other is 180° − 73° = 107°. The condition that they form a straight angle justifies the subtraction.
For angles around a point, identify whether the marked regions cover the full turn without gaps or overlap before using 360°. A child should know which complete angle is being partitioned.
Keep course-specific figures clear
Foundation P6 develops unknown-angle work in figures involving rectangles, squares and triangles. Standard work includes the additional special quadrilaterals listed in its curriculum. Choose diagrams that fit the child’s course and follow the scope concerning additional construction lines.
For a Standard example, adjacent interior angles in a parallelogram are supplementary. If one is 68°, the adjacent angle is 112°. Its opposite angle is 68°. Label the relevant pair so the child does not apply the same relationship to every nearby angle.
If a child is stuck, ask them to state one known relationship before adding numerical work. A short correct chain is more useful than filling a diagram with unconnected calculations. Use a differently oriented figure afterwards to check whether the relationship survives the change in appearance.
Average appears in the current P6 content for both Standard and Foundation Mathematics. The arithmetic mean connects a total value with the number of data values. Keep both quantities visible.
Worked example: four activity records
The numbers of pages read during four sessions are 6, 8, 10 and 12. The total is 36 pages. Dividing by four sessions gives an average of nine pages per session.
The average does not mean that exactly nine pages were read during every session. It describes the total distributed equally across the four sessions.
Worked example: a missing fifth value
After a fifth session, the average across all five sessions is ten pages. The new total must therefore be 5 × 10 = 50 pages. The earlier four sessions totalled 36, so the fifth session contributed 50 − 36 = 14 pages.
Check by adding 6 + 8 + 10 + 12 + 14 = 50, then dividing by five. The calculation returns to the stated average of ten.
Do not average two averages without the counts
Suppose two sessions have an average of eight pages, while three sessions have an average of twelve pages. Their totals are 16 and 36 pages. Together, five sessions total 52 pages, so the combined average is 10.4 pages.
Simply calculating (8 + 12) ÷ 2 gives ten, which ignores that the two groups contain different numbers of sessions. Reconstructing the totals prevents that mistake.
Read a chart’s whole and labels
For a Foundation P6 pie-chart example, suppose a chart states that 30% of 60 children prefer cycling. The cycling group contains 18 children. Ask what the entire circle represents and whether the percentage refers to all children or another defined group.
Use the information supplied by the chart. Do not assume the size of the whole from the appearance of the circle, and do not invent missing counts. A graph or chart is a representation of particular data, not an invitation to guess.
A connected problem becomes easier to follow when each intermediate value is labelled. The child should know whether a number represents an original total, a part, an amount removed or a new remainder.
Original Standard practice problem
A reading room has 240 books. The ratio of fiction books to non-fiction books is 3:2. A quarter of the non-fiction books are borrowed. What is the ratio of fiction books to non-fiction books remaining in the room?
- The original ratio has five units. One unit represents 240 ÷ 5 = 48 books.
- Fiction books: 3 × 48 = 144. Non-fiction books: 2 × 48 = 96.
- A quarter of the 96 non-fiction books is 24, so 72 non-fiction books remain.
- The new ratio is 144:72, which simplifies to 2:1.
The fiction quantity stays at 144 because the question removes only non-fiction books. The whole available in the room changes from 240 to 216. Keeping those changes separate prevents a calculation from being attached to the wrong quantity.
Examine a plausible wrong method
A child might take a quarter of all 240 books and subtract 60 from the non-fiction group. That calculation uses the wrong reference quantity. The wording says a quarter of the non-fiction books, so the fraction must apply to 96.
Ask the child to mark the quantity named by the phrase before calculating. Then give a contrasting question in which a quarter of all books is borrowed. The method should change because the relationship has changed.
Check through the final situation
The remaining counts are 144 and 72, totalling 216. The ratio 2:1 means the fiction count is twice the remaining non-fiction count, which is true. These checks confirm both the quantities and the requested comparison.
This is a suggested Standard practice example, not an official question or a compulsory problem-type label. For Foundation practice, use a connected task drawn from the Foundation course, such as finding a percentage amount and then a remainder, with an appropriate level of support.
CHAPTER 13 OF 18
13. Use school and preliminary feedback to improve the next attempt
A preliminary examination is evidence from one school assessment, not a guaranteed national result. Read it as a source of teaching information. Ask where marks were lost and which recurring decisions need attention.
Review in three passes
- Understand: ask how the child read the question and what each quantity meant.
- Repair: explain the first incorrect step using a suitable representation.
- Transfer: try a different example without displaying the model solution.
Do not ask for repeated copying when the child cannot explain the correction. A copied page can look finished while the original difficulty remains. Ask for a short explanation or a new attempt that reveals the decision.
Give timing a specific purpose
First establish that the child can perform the task with understanding. Then use a timed section to investigate pace. Notice whether time is spent rereading, deciding on a method, calculating, drawing or checking.
A child who cannot identify the required quantity needs teaching before a faster deadline. A child who understands the method but spends too long rewriting every line may benefit from more efficient organisation.
Use calculator permission accurately
Follow the instructions for the school task or applicable examination. Where a calculator is allowed, ask the child to record the intended expression and check the result’s size and unit. Where it is not allowed, practise the required calculation method.
The device performs the calculation entered; it does not decide which quantity belongs in the expression. An incorrect whole in a percentage calculation remains incorrect even when the display is accurate.
Bring persistent patterns to the teacher with a small number of examples. Ask what is also seen in class, which priority should come first and how progress can be checked. If considering tuition, ask the same practical questions rather than relying on a promise of a future grade.
This is an original suggested plan, not an official timetable. Select one current topic and one supporting skill from actual schoolwork. Adjust the amount of practice to the child’s course, readiness and other school commitments.
Week one: map the difficulty
Choose a few representative questions. Ask the child to explain the quantities, identify the required answer and describe a first step. Keep a short note of what is independent and what requires prompting.
Choose one clear priority. For example, a Standard pupil may need to distinguish a ratio part from a fraction of the whole. A Foundation pupil may need to identify the known whole before calculating a percentage of it.
Week two: teach and compare
Use a manageable example and a suitable drawing, table or written statement. Explain why the method works. Compare it with one tempting incorrect method and ask the child to locate the difference.
Then change the numbers. If the child can explain and solve the fresh task, reduce one piece of support. If not, simplify the representation or revisit an earlier skill rather than adding more complicated quantities.
Week three: change the context
Use the same relationship in a different setting or a differently oriented diagram. A fraction relationship might move from ribbon to a collection of objects. A volume question might present a base area instead of separate base dimensions when that fits the course.
Ask the child which feature makes the earlier method relevant. The aim is to recognise the relationship without relying on familiar names or page layout.
Week four: review independently
Return after a gap and use a new task. Record the method, accuracy and prompts required. Where appropriate, include a short timed section to understand pace after the concept is secure.
Compare the result with the first week. Keep the approach that helped, choose the next priority and share unresolved difficulties with the teacher. A useful outcome may be a clearer explanation or less dependence on prompts, even before an overall mark changes.
Do not let the calendar force an early jump. Repeating a week with new examples can be sensible when the relationship is still fragile. The plan should respond to learning, not merely produce completed pages.
After PSLE, useful preparation can focus on how the child works rather than another round of primary papers. Accurate reading, clear notation and the ability to ask a precise question remain valuable when the content changes.
Explain a symbol before manipulating it
Ask what an equals sign means, what a fraction refers to and what a letter represents. A child who can explain that both sides of an equation have equal value has a clearer basis for later equation work than one who remembers only a movement rule.
Keep written statements mathematically true. For example, write 6 × 4 + 3 = 24 + 3 = 27, rather than attaching an equals sign to an incomplete or unequal intermediate statement.
Ask a question that identifies the uncertainty
Practise statements such as “I understand the calculation, but I do not know which quantity is the whole” or “I cannot see why these two angles are equal”. These questions give a teacher a useful starting point.
A child can also mark the first unclear line of a worked example and ask about that line. This is more actionable than deciding that the entire topic is impossible.
Keep independent checking manageable
Choose a check that matches the task: substitute an unknown into the original expression, add parts to recover a total, compare a percentage with its reference whole or verify the unit of a measurement.
Do not add a long checklist that the child cannot use. Begin with one reliable check and build from it. Independence grows through decisions the learner understands and can repeat.
Use the actual secondary-school subject information and teacher guidance when the next stage begins. Primary Standard and Foundation labels do not by themselves describe every future subject arrangement. For now, consolidate the child’s current strengths and make the next learning questions clear.
CHAPTER 16 OF 18
16. Connect Mathematics learning with PSLE scores and nearby school choices
P6 families may be preparing for the examination year or making school choices after results. Keep those jobs distinct. Before the result, use schoolwork to guide learning. Once the official result arrives, use it with current eligibility information, school programmes and a realistic travel plan.
Separate a subject result from the overall PSLE score
MOE’s scoring guide explains that the four subject AL scores add to an overall PSLE score from 4 to 32. For example, Standard-subject ALs of 4 for Mathematics, 5 for English, 6 for Mother Tongue and 6 for Science total 21. One subject AL does not establish the overall result. Lower overall numbers represent stronger results within this system.
| Subject mark range | Achievement Level |
|---|---|
| 90 and above | AL1 |
| 85–89 | AL2 |
| 80–84 | AL3 |
| 75–79 | AL4 |
| 65–74 | AL5 |
| 45–64 | AL6 |
| 20–44 | AL7 |
| Below 20 | AL8 |
Foundation subjects use different bands: 75–100 is AL A, 30–74 is AL B, and below 30 is AL C. For posting, those grades map to 6, 7 and 8 respectively. These are different courses; the mapping does not make their questions or percentages interchangeable. A practice-paper percentage is not an official PSLE result.
Read Posting Group eligibility before comparing schools
The current Posting Group reference below was checked on 21 November 2026. Under Full Subject-Based Banding, Posting Groups relate to entry and initial subject levels, while G1, G2 and G3 describe secondary subject levels. Eligible students can take subjects at different levels.
| Overall PSLE score | Posting Group eligibility |
|---|---|
| 4–20 | PG3 |
| 21–22 | PG2 or PG3 |
| 23–24 | PG2 |
| 25 | PG1 or PG2 |
| 26–30 | PG1, with AL7 or better in both English and Mathematics |
Eligibility for a Posting Group does not guarantee a place at a named school. Where an option band applies, discuss readiness and the available choices with the primary school. If a result falls outside the conditions in this table, ask the school about the applicable progression options.
Build a local shortlist around a workable school day
The schools below are geographic starting points for research. They are not individual recommendations or a ranking. Their official contact pages verify the locations. Check MOE SchoolFinder for the relevant Posting Group, subjects, programmes, CCAs and the year attached to published score information.
| Search area | School and verified location | What to check next |
|---|---|---|
| Punggol | Punggol Secondary School 51 Edgefield Plains | Current SchoolFinder entry, programmes and actual home-to-gate route |
| Sengkang | Compassvale Secondary School 51 Compassvale Crescent | Current SchoolFinder entry, programmes and actual home-to-gate route |
| Clementi | Clementi Town Secondary School 10 Clementi Avenue 3 | Current SchoolFinder entry, programmes and actual home-to-gate route |
| Bukit Batok and western estates | Bukit View Secondary School 16 Bukit Batok Street 21 | Current SchoolFinder entry, programmes and actual home-to-gate route |
| Yishun | Yishun Town Secondary School 6 Yishun Street 21 | Current SchoolFinder entry, programmes and actual home-to-gate route |
Try the journey at the relevant time. Include walking, waiting, transfers and a later return after CCAs. For Bukit Timah families, compare actual routes towards Clementi and Bukit Batok before deciding which school is convenient. A short distance on a map does not establish a manageable daily journey.
Ask what would help this child participate: a suitable CCA, a subject they enjoy, support for a learning difficulty or a routine they can manage independently. Discuss those needs with the school. A family is choosing a daily learning environment as well as submitting an eligible application.
Use verified past cut-off points without treating them as promises
Two schools publish clear figures for their 2026 Secondary 1 intake. These are past intake references, not predicted cut-off points for the November 2026 PSLE cohort entering secondary school in 2027. Clementi Town’s page explicitly excludes DSA.
| School and official source | PG3 | PG2 | PG1 |
|---|---|---|---|
| Clementi Town Secondary | 13 | 23 | 28 |
| Bukit View Secondary | 20 | 24 | 29 |
For example, a score of 12 is stronger than a past PG3 cut-off of 13. A score of 13 matches that historical number, and a score of 14 is less strong. None of those comparisons fixes the next intake’s outcome. Compare the correct Posting Group and applicable conditions, and use current official information for the actual application.
For the other schools listed above, use SchoolFinder to obtain the applicable score range rather than filling a gap with an unverified number. Record the intake year beside every figure. A website updated recently can still contain information about an earlier admission cycle.
For families using the 2026 PSLE results
The SEAB announcement dated 17 November 2026 states that results will be released on 24 November 2026 from 11:00am. Online Secondary 1 choices open at 11:30am that day and close at 4:30pm on 30 November 2026, Singapore time. These dates apply to that exercise. For another cohort, use its own announcement.
MOE’s school-choice guide advises using all six choices and including two or three schools whose previous cut-off points are less stringent than the child’s result. Put the schools in the order the family genuinely prefers, while considering eligibility and realistic options. Save the submitted choices and check the current official instructions.
The same 2026 announcement describes Crest and Spectra as options for eligible pupils in PG1 or PG1/2 who are interested in a practical learning environment. A direct application to either school should be accompanied by the normal six secondary-school choices. Read the current process and discuss the option with the primary school.
For the longer view, MOE’s Full SBB pathway overview connects secondary learning with routes including junior college or Millennia Institute, polytechnic and ITE. Later progression depends on the relevant qualifications, subjects and entry requirements. A current primary mark does not settle every later option.
Choose a relevant eduKate learning route
- eduKateSG Primary 6 Mathematics support: begin with the school stage and the child’s current difficulty.
- eduKatePunggol Primary Mathematics guide: explore local teaching support and the questions to ask before lessons.
- eduKateSengkang Mathematics Learning Hub: find explanations and guides for the relevant school stage.
- Bukit Timah Primary Mathematics guide: discuss the learning need and confirm current lesson arrangements.
Bring an independent work sample and the teacher’s comments when discussing support. Ask what will be taught first, how understanding will be checked on a fresh question and how much home practice is expected. Confirm current availability, fees and the actual teaching location directly.
Which primary Mathematics syllabus applies to P6 from 2026?
The programme introduced with the 2021 P1 cohort reaches P6 from 2026. This guide uses the MOE document updated October 2025. Check the current official document and school notices before treating an older resource as a complete checklist.
Are ratio and average both current Standard P6 topics?
Yes. They appear in the current Standard P6 content. Average also appears in Foundation P6, while ratio is not listed in that Foundation content. Match practice to the child’s course.
Must Foundation pupils learn Standard algebra and circle questions?
Those are not listed Foundation P6 requirements in the document used here. A child may enjoy additional exploration, but unfamiliar Standard work should not be used to judge whether the Foundation curriculum has been mastered.
Should we revise only the topics listed on the P6 pages?
No. P6 learning builds on earlier number, fraction, measurement and reasoning skills. Use work samples to identify the earlier foundation needed for the current task and revisit it when necessary.
Why does my child know the formula but still answer incorrectly?
Check whether the correct quantity or dimension was selected. A volume formula using full tank height will not find the current water volume when the tank is partly filled. Teach the interpretation before repeating the formula.
Should we practise all speed questions in an older book?
Do not assume an older topic list matches the current syllabus. Speed is not listed as a standalone topic in the document used here. Check the school’s guidance and distinguish a particular rate relationship from an imported collection of old-syllabus questions.
Can a preliminary mark predict the child’s PSLE AL exactly?
No. It describes performance on that school assessment. Use it to identify coverage, understanding, accuracy and pace, then make a focused revision plan. Actual national results are needed for actual posting decisions.
Are 2026 examination documents confirmed requirements for 2027?
This guide does not make that claim. At the 21 November 2026 check, the official PSLE hub linked 2026 formats. Consult SEAB and the school for the documents applying to the child’s examination year.
How much timed practice should we do?
Use timing to investigate a specific issue after the child understands the task. A short section may reveal whether planning, calculation or checking takes too long. Follow the relevant school and examination instructions rather than adopting a universal home quota.
What is the best first step this week?
Choose one recent question, ask the child to explain the quantities and identify the first uncertain step. Teach that step, try a different example and record the help needed. Use the evidence to decide what to practise next or what to discuss with the teacher.
Official information was checked on 21 November 2026. Follow your school’s current notices for school-based tasks and the applicable SEAB examination-year documents for PSLE. The worked questions, explanations and home plans in this guide are original teaching suggestions.
- MOE Primary Mathematics Syllabus, updated October 2025; Standard P6 pages43–44 and Foundation P6 pages49–50
- Valour Primary: Mathematics Curriculum for 2026
- SEAB PSLE official information hub
- SEAB PSLE formats examined in 2026
- MOE PSLE scoring reference
- Official school explanation of Posting Group eligibility
- MOE secondary-school experience under Full Subject-Based Banding
- MOE parent guide to choosing a secondary school
- SEAB 2026 results and Secondary 1 posting announcement
- MOE SchoolFinder
- Clementi Town Secondary: 2026 intake cut-off points
- Bukit View Secondary: 2026 intake cut-off points
- MOE Full SBB secondary experience and post-secondary pathways
Official school contact pages are linked beside their locations in the school-choice chapter. The eduKate links offer further teaching guidance and support routes. Use official information for curriculum and admission requirements, and check the cohort year before acting on dates or past score figures.
Contents · Previous chapter · Primary 6 Mathematics support guide
