VIEW THIS AS

Auto mode follows the Route Engine until you choose a viewpoint.

YOU ARE HERE

ROUTE CHECK

CONNECTED TO

WHAT NEXT

Use the canonical route for this room, or HELP if you are unsure.

How Energy Works | The Energy Divide: Why Can Cheap Generation Coexist with Expensive Bills?

Three secondary students review open books and notes together in a classroom.

You hear that solar or wind electricity has become cheaper. Then your bill arrives, and it still feels expensive. How can both things be true?

Generation cost measures one part of electricity supply. A household bill also reflects delivery, reliability, charging rules and how much electricity is used. A cheaper power plant can help, but the entire journey matters.

Start at the power plant

Researchers compare technologies using the levelised cost of electricity, or LCOE. It estimates lifetime generation costs per unit of electricity, bringing spending and output at different times into a common calculation. Financing and expected output affect the result.

IRENA’s July 2026 summary reports that more than 90% of utility-scale renewable projects commissioned in 2025 generated electricity below the cost of the cheapest new fossil-fuel plant in their market. This is a comparison of new generation, not household tariffs or an entire reliable power system. Read the IRENA cost summary.

For the detailed calculation and its limits, continue to How Levelized Cost of Energy Works.

Now follow the electricity to the customer

A farm’s tomato price is not the whole cost of getting a tomato into your kitchen. Transport and refrigeration also need paying for. Electricity has a different pricing system, but the analogy helps us see why production is only one step.

Electricity needs lines, substations and maintained networks. A low-cost plant is less useful if its output cannot reach customers. In February 2026, the IEA reported over 2,500 gigawatts of renewable, large-load and storage projects stalled in grid queues worldwide. These indicative queue figures can change, and not every project will be built. Read the IEA grid analysis.

Reliability has to be built into the system

Households need power when they cook or switch on the lights. Solar output changes with daylight and weather; wind output changes with wind conditions. Storage, flexible generation, connections and suitable changes in demand can help balance the system. The appropriate combination depends on the place.

These services have costs, and they can also create savings by reducing shortages or using equipment better. Renewable generation can reduce wholesale prices while network and balancing costs still affect retail bills. The IEA explains these bill components.

Financing and tariffs are different parts of the calculation

Financing for a plant is already part of its modelled generation cost; do not add it twice when comparing the same project. Other infrastructure also needs funding. Interest rates and risks can influence what investments cost.

A tariff is the structure of prices and charges used to calculate what a customer pays. Supply costs, network charges, taxes, levies and applicable subsidies can enter that structure. Contracts and policy influence when and how changes reach consumers.

A simple example explains the apparent contradiction

Imagine a bill with S$60 in supply costs and S$40 in other charges. If supply costs fall to S$50 and everything else stays the same, the bill falls from S$100 to S$90. If other charges instead rise to S$55, the bill becomes S$105. These invented figures explain arithmetic, not Singapore’s actual tariff.

Consumption matters too. A lower unit price can still produce a higher total bill if much more electricity is used. During hot weather, a household may run cooling for longer even without changing equipment.

The questions that make the bill clearer

Ask which costs changed, which investment they pay for, how the tariff distributes them and how consumption changed. Those questions are more useful than assuming that a cheaper technology must immediately produce an identical saving on every bill.

Cheap generation is a valuable starting point. Affordable energy is the result of turning it into a dependable service that people can access and pay for.

Read the Energy Divide series

Continue through eduKateSG