VIEW THIS AS

Auto mode follows the Route Engine until you choose a viewpoint.

YOU ARE HERE

ROUTE CHECK

CONNECTED TO

WHAT NEXT

Use the canonical route for this room, or HELP if you are unsure.

How B-Trees Work in Computer Science | Multiway Nodes, Splits, Merges and Database Indexes

Three secondary students review open books and notes together in a classroom.

B-trees work by storing many sorted keys inside each node and giving each node many children, so one node access can eliminate a large portion of the search space. Instead of balancing a binary tree with rotations after every local height problem, a B-tree keeps every leaf at the same depth and controls how full each multiway node is.

That design is especially important when the expensive unit is not a CPU comparison but a page, block or cache-line access. A binary tree may need many pointer hops. A B-tree makes each hop do more work: search several keys already loaded together, then descend into exactly one child page.

This master guide explains multiway nodes, sorted separator keys, child ranges, minimum degree and order conventions, root exceptions, leaf depth, node fullness, search, insertion, node splitting, median promotion, root growth, deletion, borrowing, redistribution, merging, root shrinkage, page-aware engineering, database indexes, storage locality, write amplification, concurrency, augmentation, complexity and the boundary between B-trees and B+ trees.

Foundation: How Binary Search Trees Work · Compare: How Red-Black Trees Work · How X Works Hub


The Direct Answer: What Makes a B-Tree Different

One Node Can Hold Many Keys

A B-tree node is not restricted to one key and two children. It can contain several sorted keys and therefore partition key space into several child ranges. If a node stores keys k1

High Fan-Out Keeps Height Small

Because each internal node can branch into many children, the tree can index enormous datasets with very few levels. This matters when moving to another node means another disk page, SSD page or cache miss. B-trees spend more comparisons within one node to avoid expensive movement between nodes.


A B-Tree Is Still an Ordered Search Tree

Search Uses Comparator Order

Keys inside every node are sorted. The query is compared against those keys to either find an exact match or choose the one child whose interval can still contain the target.

Inorder Meaning Generalises to Multiway Nodes

For keys k1…km and children c0…cm, every key in c0 precedes k1, every key in c1 lies between k1 and k2, and so on. The familiar BST invariant becomes a multi-interval invariant.


All Leaves Stay at the Same Depth

Balance Is Global and Explicit

A valid B-tree keeps all leaves at one common depth. There is no allowed long branch and short branch the way a plain BST can degenerate.

Height Changes Only at the Root

Insertion can split the root and create a new root one level higher. Deletion can merge the root down until its last key disappears and its only child becomes the new root. Ordinary internal updates preserve equal leaf depth.


Node Capacity Is Controlled

Nodes Have Maximum Occupancy

A B-tree parameter determines how many keys and children one node can hold. When an insertion would exceed the maximum, the node is split.

Non-Root Nodes Also Have Minimum Occupancy

To prevent sparse tall structures, internal nodes other than the root must stay at least partly full. Deletion repairs underfull nodes by borrowing from siblings or merging. Occupancy bounds are the B-tree analogue of balance rules.


Terminology: Order, Degree and Minimum Degree

Different Books Use Different Conventions

Some sources define B-tree order as maximum children, others as maximum keys, and CLRS-style treatments use minimum degree t. These conventions can shift formulas by one.

State the Convention Before Using Numbers

Under a common minimum-degree t convention, each non-root node has at least t−1 keys and at most 2t−1 keys, and an internal node with k keys has k+1 children. This article uses that model when examples need explicit bounds.


The Root Is a Special Case

A Small Root May Be Underfull

The root can contain fewer keys than ordinary non-root minimums. Otherwise a newly created or shrinking tree would require artificial padding.

An Empty Tree Has No Ordinary Occupancy Problem

The root can be absent or represented by an empty leaf depending on implementation. Root exceptions keep the structure dynamic without violating the spirit of balanced occupancy.


Why B-Trees Fit Storage Pages

A Node Can Be Sized to One Page

Database and filesystem implementations often choose node capacity so one node fits into a page or block. Reading that page loads many separator keys and child pointers together.

Fan-Out Reduces Expensive I/O

If a node has hundreds of children, a tree indexing billions of records may need only a handful of page reads. This is the central systems advantage over binary search trees on external storage.


Search Inside a Node

Find the First Separator Not Less Than the Query

A node can scan linearly for small key counts or use binary search among its sorted keys for larger nodes.

Then Either Return or Descend

If a key equals the query, search succeeds when the tree stores records in internal nodes. Otherwise choose the child interval around the insertion/search position. B+ trees alter where payload records live; that remains a separate future owner.


Search Complexity Has Two Scales

Tree Height Counts Node Accesses

The number of node-to-node descents is logarithmic in n with a logarithm base related to fan-out.

Within-Node Search Costs Comparisons

Each visited node may perform O(log B) comparisons with binary search or O(B) with linear scan for node capacity B. On storage systems, page access often dominates these CPU comparisons, which is why high fan-out is useful.


Insertion Descends Toward a Leaf

The New Key Belongs in Sorted Position

A standard B-tree insertion eventually places the new key into a leaf while preserving sorted order.

Full Nodes Must Be Managed

If the target leaf or an ancestor is full, insertion needs a split. One classic top-down strategy splits full children before descending into them, guaranteeing the algorithm never recurses into a full node.


Splitting a Full Node

Choose a Median Separator

A full node’s keys are divided into left and right groups around a median key.

Promote the Median to the Parent

The median leaves the child node and becomes a separator key in the parent. The parent’s corresponding child pointer is replaced by two child pointers for the new left and right nodes. If the split node was internal, its child pointers are divided consistently with the key ranges.


Root Split Grows the Tree

A Full Root Has No Parent to Receive a Median

Create a new empty root, make the old root its child, then split that child.

Height Increases by Exactly One

The promoted median becomes the first key of the new root and all former leaves move one level farther away together. Equal leaf depth is preserved.


Why Splitting Preserves Order

Left Keys Stay Below the Promoted Median

The left node receives keys smaller than the median and matching child ranges.

Right Keys Stay Above

The right node receives keys larger than the median. The median in the parent separates exactly those two intervals. Splitting changes page boundaries, not global sorted order.


Deletion Is More Complex Than Insertion

Removing a Key Can Create Underflow

A non-root node that falls below its minimum key count breaks the occupancy invariant.

Repair Needs Sibling Resources

If an adjacent sibling has extra keys, the tree can redistribute through the parent. If siblings are at minimum occupancy, the deficient region may merge with a sibling and pull a separator key down from the parent.


Deleting From a Leaf

If the Leaf Has Extra Keys, Remove Directly

The remaining key count stays above the minimum and no structural repair is needed.

If the Leaf Is at Minimum, Repair Before or After Removal

Algorithms vary in whether they proactively ensure a child has spare capacity before descent or repair underflow on return. The same borrow-or-merge mechanisms preserve occupancy.


Deleting From an Internal Node

Predecessor Replacement Is One Option

If the child immediately before the key has more than the minimum keys, replace the target with its predecessor from that subtree and delete the predecessor there.

Successor Replacement Is Symmetric

If the following child has spare keys, use the successor. If neither adjacent child has spare capacity, merge them with the separator key and continue deletion in the merged node.


Borrowing From a Sibling

The Parent Separator Moves Down

To borrow from the left sibling, one parent separator moves into the front of the deficient child while the left sibling’s largest key moves up into the parent.

Child Pointers Move Too for Internal Nodes

If nodes are internal, the corresponding outer child pointer transfers with the borrowed boundary key. Borrowing is a rotation-like redistribution across three participants: sibling, parent and target child.


Borrowing From the Right Sibling

Mirror Redistribution

A parent separator moves to the end of the deficient child, the right sibling’s smallest key moves up into the parent, and the sibling’s first child pointer may transfer if internal.

Order Remains Continuous

The moved keys are exactly the boundary keys between adjacent ranges. Redistribution changes occupancy without changing sorted sequence.


Merging Nodes

Combine Two Minimum Siblings Plus the Parent Separator

If neither sibling can spare a key, move the separating parent key down and concatenate the two siblings around it.

The Parent Loses One Key and One Child

This can make the parent underfull, allowing the repair problem to propagate upward. Merging is deletion’s structural counterpart to insertion splitting.


Root Shrinkage

A Root With No Keys and One Child Is Redundant

After deletion merges children, the root may lose its final separator.

Promote the Only Child to Root

Tree height decreases by one. All leaves become one level closer together, so equal leaf depth remains true. This is the only ordinary way B-tree height decreases.


Why Occupancy Bounds Imply Logarithmic Height

Every Non-Root Internal Node Has Many Children

Under minimum degree t, each non-root internal node has at least t children.

Node Count Grows Rapidly With Levels

A tree of height h must contain at least a branching structure exponential in h, except for the relaxed root. Therefore height is O(log_t n), much smaller than binary height when t is large.


High Fan-Out Is the Core External-Memory Idea

CPU Comparisons Are Cheap Compared With Storage Misses

Searching 100 keys already in memory can be cheaper than fetching another page.

B-Trees Trade Local Work for Fewer Page Transfers

This is a recurring systems pattern: use more computation per fetched block so the number of expensive block accesses stays low.


B-Trees and Database Indexes

Ordered Indexes Support Exact and Range Queries

A B-tree-family index can find a key, then efficiently locate neighbouring ordered keys and ranges.

Real Database Implementations Add Concurrency and Page Engineering

Production systems commonly use B-tree or B+ tree variants with page splits, sibling links, fill factors, latches, MVCC-aware entries and other details. The abstract B-tree explains the ordered multiway core, not every database implementation choice.


B-Tree Versus B+ Tree

B-Trees May Store Records With Internal Keys

Classical definitions permit data associated with keys throughout the tree.

B+ Trees Usually Keep Records or Record References at Leaves

Internal nodes act primarily as separators, and leaves are often linked for range scans. That architectural distinction deserves its own future cluster rather than being collapsed into this master.


B-Trees Versus Binary Balanced Trees

Binary Trees Optimise Pointer-Level Ordered Search

AVL and red-black trees keep O(log n) height but branch by two.

B-Trees Optimise the Number of Nodes Visited

By packing many keys into one node, B-trees reduce height dramatically. They are ideal when nodes correspond to pages, blocks or other coarse access units.


B-Trees Versus Hash Tables

Hash Tables Excel at Exact Lookup in Expectation

They discard order to route directly by hash.

B-Trees Preserve Order

They support exact search plus lower bounds, predecessor/successor, sorted traversal and range scans with deterministic logarithmic page depth. Databases often need those ordered capabilities.


Node Search Strategy Depends on Node Size

Linear Scan Can Be Fast for Small Compact Nodes

Sequential comparisons exploit locality and low overhead.

Binary Search Helps Larger Nodes

A node with many separator keys can use binary search or branchless/vectorised techniques. The best method depends on key size, hardware and page layout.


Variable-Length Keys Complicate Capacity

Page Capacity Is Measured in Bytes, Not Merely Key Count

Database keys can have different lengths, and entries can include child pointers, record references and metadata.

Split Choice May Target Byte Balance

A practical system may split by occupied bytes or target fill factor rather than a simple median key count. The abstract key-count model remains the conceptual starting point.


Prefix Compression and Key Compression

Internal Separator Keys Can Sometimes Be Shortened

A separator may need only enough bytes to distinguish adjacent ranges rather than a full user key.

Compression Increases Fan-Out

Smaller node entries let more separators fit per page, lowering height. Systems engineering around B-trees often focuses on making each page represent more ordered space.


Fill Factor and Free Space

Completely Full Pages Split Frequently Under Random Updates

Leaving some free space can reduce immediate splits.

Too Much Empty Space Increases Height and Memory Use

Systems choose fill policies based on expected update patterns. Occupancy is both a correctness bound and a performance tuning parameter.


Sequential Insert Patterns

Ascending Keys Target the Rightmost Leaf Repeatedly

This can cause repeated splits along the right edge.

Specialised Optimisations Are Possible

Some systems choose asymmetric splits or right-edge strategies for append-heavy workloads. The abstract B-tree still requires occupancy and ordered-range correctness; production policies can tune page utilisation around the workload.


Write Amplification

One Logical Insert Can Rewrite Several Pages

A leaf split modifies the old page, creates a new page and updates the parent. Cascading splits can reach the root.

Storage Systems Care About More Than Big-O

Logging, copy-on-write, checksums, flash erase behaviour and transactional durability can dominate the cost of a theoretically logarithmic update. B-tree engineering is algorithm plus storage protocol.


Concurrency and Latching

Readers and Writers Can Meet During Splits

A page may be changing while other operations navigate through it.

Production Trees Need Coordination

Latch coupling, optimistic validation, B-link tree techniques or other concurrency methods maintain safe navigation while structure changes. The sequential B-tree algorithm is the foundation, not the complete concurrent solution.


B-Link Trees and Sibling Links

High Keys and Right-Sibling Pointers Can Support Concurrent Navigation

Certain B-tree variants let a search recover if a split moved its target range to a new sibling.

The Idea Shows How Local Metadata Extends the Core Structure

The ordered separator model remains, while extra links make structural change safer under concurrency. This is a systems extension, not a change to the basic search-tree purpose.


Copy-on-Write B-Trees

Immutable Pages Simplify Snapshotting

Instead of modifying a shared page in place, updates create new page versions and redirect parent references.

Path Copying Scales With Height

Because B-tree height is small, copy-on-write can duplicate only a handful of pages per update, though splits and merges may add more. Filesystems and storage engines use related techniques for snapshots and crash consistency.


B-Trees in Filesystems and Storage Engines

Directories, Extents and Metadata Need Ordered Indexing

B-tree families are natural for mapping logical ranges to storage metadata.

Concrete Variants Differ Widely

B+ trees, B* trees, copy-on-write B-trees and specialised prefix/compression schemes tune the same multiway ordered idea to different durability and locality requirements.


A Common Failure: Confusing Maximum Keys With Maximum Children

Symptom

Split and minimum-occupancy formulas are off by one.

Repair

State the exact convention in code and documentation. For minimum degree t, internal non-root nodes typically hold t−1 through 2t−1 keys and therefore t through 2t children.


A Common Failure: Split Keys but Not Child Pointers

Symptom

Internal node keys look sorted but descendant ranges become unreachable or overlap.

Repair

When splitting an internal node, partition its child pointer array at the matching boundary. A node with m keys represents m+1 intervals; keys and children form one coupled structure.


A Common Failure: Promote the Wrong Boundary Key

Symptom

Parent separators no longer match the ranges of the two split children.

Repair

Use the convention’s median separator and verify that every key in the left child is below it and every key in the right child is above it under duplicate policy.


A Common Failure: Merge Without Pulling Down the Parent Separator

Symptom

Two siblings concatenate but the key separating them stays in the parent, leaving a gap or duplicate routing boundary.

Repair

Merge is sibling-left keys + parent separator + sibling-right keys, with child pointers interleaved consistently. The parent must lose that separator and one child link.


A Common Failure: Borrow a Key but Forget a Child Pointer

Symptom

Leaf cases pass, internal redistribution loses a subtree.

Repair

For internal nodes, borrowing across a boundary transfers one child pointer together with the rotated separator relationship. Test borrowing at several internal depths, not only leaves.


A Common Failure: Leave an Empty Root Above One Child

Symptom

Tree height contains a useless top page with zero keys.

Repair

After deletion, if root has no keys and one child, make that child the new root and reduce height. Root exceptions exist to allow this shrinkage.


Testing B-Trees by Invariants

Check Sorted Keys and Range Separation

Within each node, keys are sorted. Child i must contain only keys in the interval defined by adjacent separators.

Check Occupancy and Equal Leaf Depth

Every non-root node respects minimum and maximum occupancy; the root follows its exception; every leaf occurs at the same depth. Count child pointers: an internal node with k keys must have k+1 children under the standard model.


Property-Based B-Tree Testing

Compare Logical Contents With a Trusted Ordered Map

Run random insert, update, delete, search and range operations.

Validate After Every Mutation

Check node occupancy, key order, child ranges, leaf depth, reachable-node uniqueness and stored size. Directed tests should force root splits, cascading splits, borrowing from each side, merges and root shrinkage.


Two Practical Perspectives

One Page Is a Whole Neighbourhood Map

A B-tree node is not one signpost. It is a compact directory of many boundaries. Search reads the directory once and chooses one neighbourhood to enter next. The large local map is what keeps the number of neighbourhood changes small.

B-Trees Are Designed Around the Cost of Movement

An algorithms student sees multiway balance. A database engineer sees pages and range scans. A filesystem engineer sees durable metadata. A hardware engineer sees cache lines and locality. The same structure exists because moving to another storage block is expensive enough to justify more work inside each block.


How to Teach B-Trees After Binary Trees

Start by Changing the Cost Model

Ask what happens if following one pointer costs milliseconds while comparing ten keys already loaded costs microseconds. The motivation for multiway nodes becomes immediate.

Then Introduce Occupancy Repair

Insertion splitting prevents overflow; deletion borrowing and merging prevent underflow. These are not arbitrary cases. They are the mechanisms that keep every level wide enough and all leaves at one depth.


Frequently Asked Questions

Is a B-Tree Binary?

No. The B does not mean binary. B-tree nodes can have many children.

Why Are All Leaves at the Same Depth?

That is the structure’s balance condition. Splits and merges are designed to preserve it, so every search crosses the same number of tree levels up to where a key is found internally.


More Frequently Asked Questions

Why Use B-Trees Instead of Red-Black Trees?

When a node corresponds to a page or block, high fan-out can reduce expensive page accesses drastically. Red-black trees have smaller nodes and greater height.

Are Database Indexes Always Classical B-Trees?

No. Many use B+ tree or related variants, plus concurrency, logging and page-format engineering. ‘B-tree index’ is often used broadly in systems documentation.


The Series Map and Sources

Pillars in This Cluster

The B-Tree Nodes pillar owns multi-key node structure, child intervals, occupancy and page sizing. The Insertion and Splitting pillar owns full-node splits, median promotion and root growth. The Deletion and Merging pillar owns borrowing, redistribution, merging, underflow and root shrinkage. B+ trees remain a separate future cluster.

Sources and Further Reading

For a clear open treatment of B-trees, see Open Data Structures: B-Trees. For a production database perspective on B-tree-family indexes, see PostgreSQL Documentation: B-Tree Indexes.


Final Synthesis: B-Trees Balance the Cost of Searching Against the Cost of Moving

The Mechanism

Pack many ordered separators into one node, descend through one interval, split nodes that become too full, borrow or merge when deletion makes them too empty, and keep all leaves at one depth.

Why It Works

High occupancy gives high fan-out; high fan-out gives low height. The structure spends more comparison work inside each loaded node so it can make far fewer expensive trips between nodes. That trade is the reason B-tree families became foundational to storage systems.


Worked Search Trace: One Page Eliminates Many Ranges at Once

A Four-Key Node Creates Five Search Regions

Suppose an internal node contains [20, 40, 60, 80]. A query for 55 is greater than 40 but less than 60, so only the child between those separators can contain the target. The other four child ranges can be discarded after inspecting this one loaded node. A binary tree would need several pointer-level decisions to create comparable narrowing. The B-tree compresses many ordered branch decisions into one page-local search.

The Cost Model Explains the Wide Node

If the node is already in memory, comparing 55 against several separator keys is cheap. Fetching another page from storage is far more expensive. B-trees deliberately increase local comparison work so each expensive node transfer makes more progress. This is the central performance idea to keep visible: the structure is not merely a taller-key version of a BST; it is a search tree redesigned around block movement.

Formal Height Reasoning From Minimum Occupancy

Minimum Fan-Out Forces Exponential Breadth

Under minimum degree t, every non-root internal node has at least t children. Once the root has become internal, each level below it expands by at least a factor of t. A height-h tree therefore requires a number of nodes and keys that grows exponentially with h. Turning that statement around, height grows only logarithmically with the number of stored keys.

Large t Changes the Practical Meaning of Logarithmic

A binary balanced tree has logarithm base two in its conceptual branching. A B-tree node can have tens, hundreds or more children depending on page size and entry width. The asymptotic label O(log n) hides this enormous constant difference in tree levels. For external storage, reducing height from perhaps thirty binary pointer steps to three or four page levels can dominate every other implementation detail.

Worked Insertion Trace: Leaf Split to Root Split

A Leaf Split Creates Parent Pressure

Imagine a leaf page reaches maximum capacity. Splitting moves roughly half the keys to a new sibling and promotes a separator to the parent. The leaf level remains unchanged, but the parent gains one key and one child pointer. If the parent still has room, the insertion stops structurally. If the parent was already full under a bottom-up strategy, the same split logic can repeat at the parent.

When the Root Splits, Every Existing Leaf Moves One Level Down Together

A full root cannot promote its median upward because no parent exists. The algorithm allocates a new root, places the median there and makes the two split results its children. The old leaves are not individually moved; the root reference changes so the entire previous tree becomes one level below the new root. Equal leaf depth is preserved automatically because the whole structure is wrapped by one new level.

Worked Deletion Trace: Borrow Before Merge

Redistribution Keeps the Parent Wide

Suppose a target child is at minimum occupancy before descent, but its left sibling has spare keys. The parent separator between them moves down into the target, and the sibling’s largest boundary key moves up to replace that parent separator. If the nodes are internal, the sibling’s rightmost child pointer moves with the boundary. The parent keeps the same number of keys and children, so tree height and fan-out are preserved without a merge.

Merge Only When Neither Neighbour Can Donate

If both adjacent siblings sit at minimum occupancy, borrowing would make the donor illegal. The tree instead merges two children with their separating parent key. This creates one larger legal node and removes one key and one child pointer from the parent. Deletion therefore trades local width for legal occupancy only when redistribution is impossible.

Why B-Trees Match Database Range Queries

Ordered Separators Support Lower-Bound Navigation

A query such as “first key greater than or equal to 500” follows the same page search as an exact lookup but retains the insertion position when no equality is found. Once the relevant leaf or record region is reached, scanning can continue in order. This ordered access pattern supports BETWEEN predicates, prefix ranges on composite keys and ordered output in ways a hash table cannot naturally provide.

B+ Tree Variants Make Range Scans Even More Direct

Many database indexes use B+ tree designs in which payload references live at the leaves and leaf pages are linked. That lets a range scan locate its starting leaf and then walk neighbouring leaves sequentially. The present B-tree cluster owns the multiway balancing mechanics; the leaf-only payload and linked-leaf architecture remains intentionally reserved for a separate B+ tree cluster.

Storage Geometry Changes the Meaning of a “Comparison”

Keys Can Be Prefix-Compressed or Indirect

A separator key may not be stored as a full application object. Systems can use prefixes, suffix compression, dictionary encoding or references into another area of the page. The comparator must still behave exactly as if the full logical keys were present. Compression is safe only when it preserves routing order.

Node Capacity Is Ultimately a Byte Budget

Textbook formulas speak in counts because fixed-size keys make the mathematics clean. Real engines budget bytes: page headers, line pointers, transaction metadata, child references and key payload all compete for space. A node can be “full” even when its key count is lower than the theoretical maximum. The abstract B-tree invariant must be mapped onto the physical page contract.

Insertion and Deletion Are Structural Duals

Insertion Pushes a Separator Up

A full node splits into two and its median separator rises into the parent. The parent becomes wider. If the root splits, height grows. Structurally, insertion converts local over-density into additional branching higher in the tree.

Deletion Pulls a Separator Down

When two minimum siblings cannot support a deletion independently, their parent separator descends into the merged node. The parent becomes narrower. If the root loses its final key, its only child rises and height shrinks. Seeing split and merge as dual boundary movements unifies much of the apparent case complexity.

Production Correctness: Page Reachability Is an Invariant

Every Live Page Must Be Reachable Exactly Once From the Root

A split that forgets to install a new child pointer creates an orphan page. A merge that leaves both old and new references can create duplicate reachability or cycles. Logical sorted-key tests may still pass on the reachable subset. Page-level validators should therefore traverse from the root, record every page identifier and compare the reachable set with allocation metadata where possible.

Root Metadata Is the Entry Point to the Whole Index

In persistent systems, losing or partially updating the root page identifier can make an otherwise intact tree unreachable. Root split and root shrink therefore deserve stronger durability treatment than ordinary page edits. Copy-on-write engines often make a new root durable first and switch a small atomic root reference only when the new tree version is complete.

Operational Metrics That Reveal Tree Health

Measure Height, Fill and Split Rate Together

A low tree height can coexist with poor page utilisation, and a high average fill can coexist with a hot right edge that splits constantly. Track average and minimum page occupancy, split and merge frequency, root-level changes and buffer-cache hit rate. These metrics reveal whether the abstract B-tree is operating efficiently under the actual workload.

Tail Latency Matters More Than the Average for Some Systems

Most searches may touch cached pages, while a small fraction trigger storage reads. Most inserts fit in one leaf, while a few trigger splits and logging. Averages can hide those structural events. Measure percentile latency and write amplification if the index sits on a user-facing request path or a durability-critical storage engine.

A B-Tree Design Checklist

Logical Questions

What comparator defines order? Are duplicates permitted? Are internal keys records or separators? What are minimum and maximum occupancy rules? What root exceptions apply? Do all leaves remain at one depth? Which operations require predecessor, successor or range scans?

Physical Questions

What is the page size? How are variable-length keys stored? What fill factor is targeted? How are pages allocated and reclaimed? What happens during a crash halfway through split or merge? How do concurrent readers survive structural movement? The B-tree algorithm is strongest when these physical questions are designed around the same ordered occupancy invariants rather than bolted on afterward.

Continue the How X Works Series

How X Works Hub · How Binary Search Trees Work · How Red-Black Trees Work