Solve:
−3x > 12.
If this were an equation, dividing both sides by −3 would give x=−4.
For an inequality, one more thing happens:
x < −4.
Multiplying or dividing both sides of an inequality by a negative number reverses the order relation because negative scaling reflects the number line.
The quick answer
- Add or subtract the same quantity on both sides: inequality direction stays the same.
- Multiply or divide by a positive quantity: direction stays the same.
- Multiply or divide by a negative quantity: direction reverses.
- Check the final interval with a test value.
Why the sign reverses
Start with a true statement:
2<5.
Multiply both sides by −1:
−2 and −5.
On the number line:
−2 is greater than −5.
So:
−2>−5.
The order reverses because multiplying by a negative reflects every point across zero.
Worked example: one-step inequality
5x<35.
Divide by positive 5:
x<7.
No reversal is needed because the divisor is positive.
Worked example: negative coefficient
−4x≤20.
Divide by −4 and reverse ≤ to ≥:
x≥−5.
Check with x=0:
−4(0)=0≤20, true.
0 does satisfy x≥−5.
Variables on both sides
Solve:
5x−7>2x+8.
Subtract 2x:
3x−7>8.
Add 7:
3x>15.
Divide by 3:
x>5.
A route that creates a negative coefficient
Solve:
2x+9>5x−3.
Subtract 5x:
−3x+9>−3.
Subtract 9:
−3x>−12.
Divide by −3 and reverse:
x<4.
This is why some learners prefer moving the smaller x-term toward the larger coefficient: it can reduce sign risk. But both routes are valid if the order relation is preserved correctly.
Brackets
Solve:
3(x−2)≤12.
Expand:
3x−6≤12.
Add 6:
3x≤18.
x≤6.
Negative bracket factor
Solve:
−2(x+1)<6.
One route is to divide by −2 immediately:
x+1>−3.
Then:
x>−4.
The sign reverses at the exact step where division by the negative number occurs.
Fractions
Solve:
x/3 + 2 ≥ 5.
x/3≥3.
Multiply by positive 3:
x≥9.
Inequality symbols carry boundary information
- x>4 means values strictly greater than 4.
- x≥4 includes 4.
- x<4 means values strictly less than 4.
- x≤4 includes 4.
The symbol decides whether the boundary itself is part of the solution set.
A solution is a set, not usually one number
Equation:
x+3=7
has one solution:
x=4.
Inequality:
x+3<7
has infinitely many real solutions:
x<4.
An inequality describes a region of permitted values rather than one exact balance point.
Compound inequalities
Solve:
3<2x+1≤9.
Subtract 1 from all three parts:
2<2x≤8.
Divide all parts by positive 2:
1<x≤4.
The variable must satisfy both boundaries simultaneously.
Compound inequality with negative scaling
Suppose:
−6≤−2x<4.
Divide every part by −2.
Because the divisor is negative, both inequality directions reverse:
3≥x>−2.
Write in increasing order:
−2<x≤3.
Checking with test values
For solution x<4 to:
2x+9>5x−3,
choose x=0, which lies inside the solution region.
Left=9.
Right=−3.
9>−3, true.
Choose x=5, outside the claimed region.
Left=19.
Right=22.
19>22 is false.
The two test values support the boundary and direction.
Boundary checking
If the final result is x≤6, test x=6 in the original inequality.
If equality holds and the original symbol allows equality, the boundary belongs in the solution set.
Context can turn an inequality into a decision constraint
A lift can carry at most 800 kg.
If a fixed load is 200 kg and each crate weighs 60 kg, then:
200+60c≤800.
60c≤600.
c≤10.
If c counts crates, c must also be a non-negative integer.
So the largest feasible number is 10 crates.
Strict versus inclusive boundaries in context
“Less than 100” becomes x<100.
“No more than 100” becomes x≤100.
“At least 100” becomes x≥100.
“More than 100” becomes x>100.
Language controls whether the boundary is allowed.
Why squaring both sides requires more care
Squaring is not order-preserving over all real numbers in the simple way positive scaling is.
For example:
−3<2
but:
9>4.
This is why more advanced inequality transformations must consider monotonicity and domain rather than treating every operation like addition or positive multiplication.
Common misconception 1: reverse the sign whenever a negative number appears
Reverse only when multiplying or dividing the entire inequality by a negative quantity.
Common misconception 2: reverse after subtracting a negative
Addition and subtraction do not reverse order.
Common misconception 3: inequalities have one solution
Most linear inequalities describe infinitely many values.
Common misconception 4: boundary inclusion does not matter
< and ≤ describe different sets.
Common misconception 5: context does not restrict the algebraic set
Counts, lengths, times and capacities can impose integer or non-negative restrictions beyond the algebraic inequality.
An inequality diagnostic ladder
- Can the learner interpret <, ≤, > and ≥?
- Can the learner solve one-step positive-coefficient inequalities?
- Can the learner explain negative reflection on a number line?
- Can the learner reverse the sign only at the correct step?
- Can the learner solve variables on both sides?
- Can the learner handle brackets and fractions?
- Can the learner solve compound inequalities?
- Can the learner test an interior and exterior value?
- Can the learner test boundary inclusion?
- Can the learner apply context restrictions?
How this fits Secondary Mathematics
Linear inequalities connect order, algebraic transformation, number lines, graphs, constraints and optimisation. The key conceptual difference from equations is that an inequality tracks order as well as value.
The deeper lesson: negative scaling flips order
Multiplying by a positive number stretches or shrinks a number line without reversing left and right.
Multiplying by a negative number also reflects the line through zero.
The inequality sign reverses not because algebra demands an arbitrary exception, but because negative multiplication changes orientation: what was farther right becomes farther left after reflection.
