VIEW THIS AS

Auto mode follows the Route Engine until you choose a viewpoint.

YOU ARE HERE

ROUTE CHECK

CONNECTED TO

WHAT NEXT

Use the canonical route for this room, or HELP if you are unsure.

SEC Grade Mapping Explained | G1, G2, G3 and Post-Secondary Progression

Under the 2027 Singapore-Cambridge Secondary Education Certificate (SEC), students receive one certificate showing the subjects they took at G1, G2 and G3 levels. Each level has its own grade scale. SEAB provides grade mapping for situations where a post-secondary progression calculation needs to combine subjects taken at different levels. This mapping is not a new grade awarded on the certificate and should not be used as a universal conversion for every course or admission exercise.

Parents should understand the original grade first, then identify the exact progression route being considered. The SEC page gives examples involving ELMAB3 for the Polytechnic Foundation Programme (PFP) and admission to Year 2 of Higher Nitec, and ELR2B2 for polytechnic admission. MOE has also announced a change from the 2028 polytechnic intake that allows a G2 subject to be used in ELR2B2. This guide explains the principles while reminding families that the rules for a particular intake must be checked on the current official admissions pages.

  • G1 uses grades A to E; G2 uses grades 1 to 6; G3 uses A1 to 9.
  • The certificate records the original subject level and grade.
  • Grade mapping is used only when a stated progression calculation requires it.
  • G3-to-G2 mapping is different from G2-to-G1 mapping.
  • For some pathways, only specified subjects are included in the aggregate.
  • MOE announced that from the 2028 polytechnic intake a G2 subject can be used in ELR2B2.
  • Previous admission cut-offs are reference points, not guaranteed future entry scores.

1. Why are there different grade scales?

Under Full Subject-Based Banding, a student may take subjects at different levels according to learning strengths and needs. The SEC certificate reflects this mix. G1, G2 and G3 subjects use grade structures corresponding to the former N(T), N(A) and O-Level grading structures respectively.

SEAB lists the G1 grade scale as A, B, C, D and E; the G2 scale as 1, 2, 3, 4, 5 and 6; and the G3 scale as A1, A2, B3, B4, C5, C6, D7, E8 and 9. These scales are interpreted within their own subject and level.

A parent should not compare a G2 grade 2 directly with a G3 grade 2 as if they were awarded under the same assessment system. The original grade and level must always be read together.

2. What does grade mapping do?

Grade mapping provides an equivalent grade for a particular calculation when a student has taken a subject at a more demanding level than the level used for that calculation. It allows selected subjects to be considered within an aggregate score where the progression rules specify that mapping is required.

SEAB explains that mapping is used for purposes such as ELMAB3 for specified progression routes and ELR2B2 for polytechnic admissions. It is not a re-marking, a change to the candidate’s original grade or a separate qualification.

For example, a student who takes Mathematics at G3 and another subject at G2 still receives the original G3 Mathematics grade on the SEC certificate. If a specified progression calculation requires that Mathematics result to be expressed at G2 level, the mapping table is used for that calculation only.

3. G3 grades mapped to G2

SEAB’s published SEC table maps G3 grades to G2 grades as follows:

Original G3 grade Mapped G2 grade
A1 to B3 1
B4 to C6 2
D7 3
E8 4
9 5

The table is for the stated aggregate calculations. It does not mean that the student has changed from a G3 subject to a G2 subject or that the certificate will display the mapped grade in place of the original grade.

4. G2 grades mapped to G1

SEAB’s table maps G2 grades to G1 grades as follows:

Original G2 grade Mapped G1 grade
1 to 3 A
4 B
5 C
6 D

SEAB explains that where a G3 subject needs to be mapped to G1 for a progression calculation, the G3 grade is first mapped to G2 and then the mapped G2 grade is mapped to G1. Families should not skip a step or create their own conversion table.

5. Not every subject is counted in every aggregate

One of the most important details is that grade mapping does not decide which subjects are included in an aggregate. The progression rules determine which subjects count, the subject groups, prerequisites and the calculation method. A subject may appear on the certificate but not be included in a particular aggregate.

SEAB’s example for ELMAB3 shows a G1 Computing grade that is not mapped because that subject is not used for computing that ELMAB3 example. This illustrates why parents must check the actual aggregate rules instead of assuming every subject is counted.

When comparing a student’s results with a course requirement, list the exact subjects used in the formula. Then identify which grades need mapping and which subjects are excluded. If the course page provides a worked example, follow that current example rather than relying on a general online calculator.

6. ELMAB3, PFP and Higher Nitec progression

ELMAB3 is an aggregate used for specified progression purposes. SEAB’s SEC page cites the Polytechnic Foundation Programme and admission to Year 2 of Higher Nitec as examples where grade mapping may be relevant. The exact subject combination and eligibility rules should be checked for the particular admission route and intake year.

Do not assume that every student who can calculate an ELMAB3 score is eligible for the PFP or a particular Higher Nitec course. Course-specific entry requirements, subject prerequisites, minimum grades and application procedures may apply. The aggregate is one part of the eligibility framework.

For each course, open the current official MOE or ITE information. Record the intake year, required subjects, grade thresholds and any additional criteria. If the course is not listed or the mapping treatment is unclear, contact the institution before making a decision.

7. Polytechnic admission and ELR2B2

ELR2B2 is the aggregate framework used for polytechnic course admission. SEAB includes it as an example of a post-secondary progression purpose where mapping may be used. The specific ELR2B2 variant and relevant subject groups depend on the course and admission rules.

MOE announced that from the 2028 polytechnic Year 1 intake, students can use a G2 subject to compute their ELR2B2 score. The change also adjusts the maximum cut-off score from 26 to 22 points, with the last “B” subject mapped from G3 to G2. This is a future intake change and should not be applied to a 2027 admission exercise without official confirmation.

Families should be especially careful when reading old polytechnic admission guides. A document describing the current or previous intake may not reflect the 2028 rules. Check the MOE announcement and the polytechnic course entry requirements for the intended intake year.

8. A worked example: use the sequence, not guesswork

Suppose a candidate has English at G3, Mathematics at G3, Science at G3, Combined Humanities at G2, Chinese at G2 and Computing at G1. The candidate’s certificate will show each subject at the level taken and the original grade achieved.

If an aggregate calculation requires the G3 subjects to be expressed at G2, use the G3-to-G2 table for the relevant subjects. Keep G2 subject grades as G2 grades. Then check whether the aggregate formula includes the G1 subject; SEAB’s illustration shows that a subject not used in the specified aggregate is not mapped or counted for that calculation.

This example is a method, not an individual admission prediction. The student’s actual aggregate depends on the grades, eligible subjects and official rules for the pathway being applied for.

9. Do not treat mapping as a guarantee of admission

A calculated aggregate does not guarantee a place. Admission depends on eligibility, course prerequisites, available places, the applicant pool, selection method and the relevant exercise. Previous cut-off points may indicate the competitiveness of a course, but they are not a pre-set promise for the next year.

Parents should keep three questions separate: Does the student meet the minimum eligibility requirements? How is the aggregate calculated for this route? How competitive is the course likely to be in the current intake? Each question needs a different piece of official information.

10. What parents should do when results arrive

Read the SEC certificate by subject, level and original grade. Identify the pathway the student is considering. Download the current admission information and determine which subjects are included in the aggregate. Apply the official mapping only where stated. Check prerequisites and application dates, and seek clarification from the receiving institution if necessary.

Do not ask only whether a student is “G1”, “G2” or “G3” overall. Ask which subjects were taken at each level and what route those results may support. This gives a more accurate picture of the student’s options.

Official references

Grade mapping and admissions rules are purpose- and intake-specific. Always use the current SEAB, MOE and receiving-institution requirements. Do not apply the 2028 polytechnic change to earlier intakes.