Additional Mathematics integration questions sometimes ask for the area enclosed between two parabolic curves rather than between a curve and a straight line. The method is to solve the simultaneous equations for intersection points, identify which parabola is higher between them, and integrate upper curve minus lower curve across the exact intersection interval.
For example, the parabolas y=x² and y=4−x² meet where x²=4−x², so x=±√2 and y=2. Between these points, y=4−x² lies above y=x². The enclosed area is ∫ from −√2 to √2 of (4−2x²) dx, equal to 16√2/3 square units.
Did you know that the difference between two quadratic functions is itself at most quadratic? That structure gives an additional exact check: if their difference has leading coefficient a≠0 and distinct intersection inputs p The curves in the opening problem are f(x)=x² and g(x)=4−x². The first opens upward and has vertex (0,0). The second opens downward and has vertex (0,4). They form a lens-shaped region when their graphs cross twice. Its horizontal boundaries are not arbitrary values chosen from a sketch; they come from the two actual intersection inputs. Area between two functions is the integral of their non-negative vertical separation, not the integral of either function by itself. Thus a complete solution has three mathematical decisions: find the intersections, identify the upper curve and lower curve, and integrate their difference. Getting the antiderivative right is only one part of solving the geometric question. At a common point, the two y-values agree. Set x²=4−x² and rearrange to 2x²=4. Divide by two to obtain x²=2. The two real solutions are x=−√2 and x=√2. Substituting into either parabola gives y=x²=2. Therefore the intersections are P(−√2,2) and Q(√2,2). Both x-values are required because the enclosed region stretches from one crossing to the other. Reporting only the positive square root would describe one endpoint and leave the area calculation incomplete. Choose an input strictly between the intersections, such as x=0. The upper-downward parabola gives g(0)=4, while the upward parabola gives f(0)=0. Thus g lies above f at the midpoint. Their difference is g(x)−f(x)=4−2x². For −√2≤x≤√2, we have x²≤2, so 4−2x²≥0. Therefore g is above f throughout the enclosed interval, meeting it only at the boundaries. This sign proof is stronger than relying on a rough sketch. It justifies the correct integrand g−f and guarantees that the resulting integral equals positive geometric area without further sign splitting. With upper curve g(x)=4−x² and lower curve f(x)=x², the vertical separation is (4−x²)−x²=4−2x². The area is A=∫_(−√2)^(√2)(4−2x²)dx. Notice that the two x² terms combine. The difference is not 4−x² and not 4−x⁴. Subtract the whole lower function explicitly before integrating. The bounds are the actual intersection inputs, while the integrand measures the vertical distance between curves at each input. This makes the geometric meaning of every part of the integral clear. An antiderivative of 4−2x² is F(x)=4x−(2/3)x³. Evaluate at x=√2: F(√2)=4√2−(2/3)(2√2)=4√2−4√2/3=8√2/3. The function F is odd because both its terms contain odd powers of x. Therefore F(−√2)=−8√2/3. Subtract upper-bound value minus lower-bound value: A=8√2/3−(−8√2/3)=16√2/3 square units. This exact surd is the required enclosed area. The difference 4−2x² is even: replacing x by −x does not change its value. Therefore the integral from −√2 to √2 is twice the integral from 0 to √2. Calculate A=2∫₀^(√2)(4−2x²)dx=2[4x−(2/3)x³]₀^(√2). The bracket equals 8√2/3, giving A=16√2/3 again. The symmetry shortcut is valid because both the integrand and the integration interval are symmetric. It is not a rule that every area between parabolas can be doubled automatically; the selected axes and limits must actually support that simplification. The intersection inputs differ by 2√2, so the enclosed region has horizontal width 2√2. Its maximum vertical gap occurs at x=0 and equals g(0)−f(0)=4. A bounding rectangle with that width and height would have area (2√2)(4)=8√2, approximately 11.31 square units. The actual enclosed area 16√2/3 is about 7.54 square units, smaller than the bounding rectangle’s area. This is a useful plausibility check. It also anticipates the exact relationship between the area of a quadratic gap and its maximum height. Let f(x)=a₁x²+b₁x+c₁ and g(x)=a₂x²+b₂x+c₂. Their difference is g(x)−f(x)=(a₂−a₁)x²+(b₂−b₁)x+(c₂−c₁). If a₂−a₁ is nonzero, the difference is a quadratic polynomial. Its zeros are exactly the intersection inputs of the two original graphs. That means the enclosed-area problem can be studied through one quadratic sign chart, even though it originally involves two curves. The leading coefficient of the difference is the quantity that determines its shape. The individual leading coefficients do not enter the final shortcut separately; their difference does. Suppose the two parabolas meet at distinct inputs p and q with p If the coefficient of x² in D is a≠0, then D has two zeros p and q. Therefore it factors as D(x)=a(x−p)(x−q). For p The positive vertical gap is |a|(x−p)(q−x). This factorisation gives the region’s height without requiring separate slope or vertex calculations for the original parabolas. The total area between the intersection inputs is A=|a|∫_p^q(x−p)(q−x)dx. Let L=q−p>0 and substitute u=x−p. Then x−p=u and q−x=L−u, while u runs from 0 to L. The area becomes |a|∫₀ᴸ u(L−u)du. Integrating gives |a|[Lu²/2−u³/3]₀ᴸ. That equals |a|(L³/2−L³/3)=|a|L³/6. Thus A=|a|(q−p)³/6. The formula requires a genuine quadratic difference with two distinct real intersections and describes the single bounded region between them. The difference g−f is 4−2x². Its leading quadratic coefficient is a=−2, so |a|=2. The intersection inputs are p=−√2 and q=√2. Their separation is L=2√2. The cube of the separation is L³=(2√2)³=16√2. Therefore the area shortcut gives A=2(16√2)/6=16√2/3. This agrees with direct integration. The two routes support one another: the direct method establishes how the area is formed, while the shortcut packages a general calculation for quadratic differences. Consider f(x)=x² and g(x)=2(x−1)². Both have positive quadratic coefficients and therefore open upward. Their difference is g−f=2(x²−2x+1)−x²=x²−4x+2. Set it equal to zero to find intersections: x²−4x+2=0, giving x=2±√2. Between the roots, the difference g−f is negative because its leading coefficient is positive. Therefore f lies above g on the bounded region. Their differing curvatures allow two crossings and a finite enclosed area even though both parabolas open upward. In the second example, D(x)=g(x)−f(x)=x²−4x+2 has leading coefficient a=1. The intersection separation is (2+√2)−(2−√2)=2√2. Therefore the enclosed area is |1|(2√2)³/6=(16√2)/6=8√2/3 square units. At the midpoint x=2, f(2)=4 while g(2)=2, so the vertical gap is 2. The region has width 2√2, and area 8√2/3 is two-thirds of the rectangle with this width and height 2. This supplies an additional geometric check. Take f(x)=x² and g(x)=−x²+6x−4. Their difference is D(x)=−2x²+6x−4. Factorise D(x)=−2(x−1)(x−2), so the curves meet at x=1 and x=2. Between 1 and 2, (x−1)>0 and (x−2)<0, so D(x)>0. Therefore the downward-opening g lies above f there. The horizontal separation is just one unit and |a|=2. The enclosed area is 2·1³/6=1/3 square unit. Direct integration of −2x²+6x−4 from 1 to 2 yields the same result. This example is convenient for checking the shortcut without surds. An antiderivative of D(x)=−2x²+6x−4 is F(x)=−(2/3)x³+3x²−4x. At x=2, F(2)=−16/3+12−8=−4/3. At x=1, F(1)=−2/3+3−4=−5/3. Therefore F(2)−F(1)=−4/3−(−5/3)=1/3. The result matches the shortcut and is positive, as required by the upper-minus-lower arrangement. The exact integral also checks the signs in the factorisation and confirms that the full enclosed interval was used. For a quadratic difference with roots p This function is symmetric about the midpoint m=(p+q)/2. Its maximum occurs there. At x=m, both positive factors equal (q−p)/2=L/2. Therefore the maximum gap is H=|a|L²/4. The whole area is A=|a|L³/6. Dividing by LH gives A/(LH)=[|a|L³/6]/[|a|L³/4]=2/3. Thus the bounded area between two quadratics is two-thirds of its bounding rectangle’s width times maximum vertical gap. This is a general consequence of a parabolic gap, not a coincidence of one numerical example. In the opening example, integrating f(x)=x² from −√2 to √2 gives the area under the upward parabola relative to the x-axis over that interval. But the requested region is bounded above by g(x)=4−x² and below by f(x)=x². Its area is the integral of g−f. The full y-values of the curves are not themselves vertical distances between the graphs. Subtraction removes their shared baseline at each x. A problem can have an enclosed region entirely above, entirely below or crossing the x-axis; the upper-minus-lower method works because it measures separation between curves directly. If g lies above f, then g−f≥0 over the interval and its integral is non-negative area. Reversing the order would give f−g≤0 and produce the negative of the required area. That negative quantity is a signed integral, not a valid geometric area. For the opening example, ∫(f−g) would be −16√2/3. The magnitude is correct but the direct output sign is wrong for an area. Determine which curve lies above the other before writing the integral. A single test input between consecutive intersections is usually enough when the difference has no additional roots inside. Two parabolas can touch at one input where their difference has a repeated root. For instance, f(x)=x² and g(x)=2x²−2x+1 have difference g−f=x²−2x+1=(x−1)². The curves meet at x=1 only, where their difference is zero. They do not enclose a positive-area lens between two distinct real intersections. A formal shortcut using p=q=1 would give width zero and area zero. This is the degenerate limit, not a separate finite region. Read whether the question states touching or intersecting twice. Take f(x)=x² and g(x)=x²+3. Their difference is the positive constant 3. The graphs are vertical translations and never meet. There are no intersection inputs p and q to use as integration bounds. They do not form a closed bounded region by themselves. A finite area could still be defined if additional vertical boundaries were supplied, but that is a different problem. Do not invent x-limits merely because a picture shows two nearby curves. The stated boundaries must define the region being integrated. Suppose both parabolas have the same coefficient of x²: f=ax²+bx+c and g=ax²+dx+e. Their difference is g−f=(d−b)x+(e−c), at most linear. Unless it is identically zero, it has at most one real zero. Therefore two distinct intersection points and a finite enclosed lens cannot arise from only these two different equal-curvature quadratics. The quadratic-gap shortcut correctly requires a≠0 for the difference’s leading coefficient. When that coefficient vanishes, the geometry and intersection count must be reconsidered rather than dividing by the missing curvature difference. Consider f(x)=x² and g_p(x)=−x²+2px−1, with real parameter p. Their difference is D_p(x)=−2x²+2px−1. The intersection inputs solve 2x²−2px+1=0. The discriminant is (−2p)²−4(2)(1)=4p²−8=4(p²−2). There are two distinct real intersections exactly when p²>2, or |p|>√2. At |p|=√2 the curves touch, and when |p|<√2 they have no real intersection. This makes the discriminant a useful preliminary test for whether a bounded lens exists. For p²>2, apply the quadratic formula to 2x²−2px+1=0. The roots are x=[2p±√(4p²−8)]/4=[p±√(p²−2)]/2. Their difference is L=√(p²−2), independent of the sign of p after ordering. The leading coefficient of the difference D_p is −2, with magnitude 2. Therefore the enclosed area is A(p)=2L³/6=(p²−2)^(3/2)/3. This formula is meaningful only when |p|>√2, where two distinct real intersections exist. The condition is part of the answer, not an optional afterthought. Choose p=2. Then D_2(x)=−2x²+4x−1. The intersections are x=[2±√2]/2=1±1/√2. Their horizontal separation is √2. The area formula gives A=(p²−2)^(3/2)/3=2^(3/2)/3=2√2/3. The midpoint is x=1, where D_2(1)=−2+4−1=1, the maximum vertical gap. Two-thirds of gap times width gives (2/3)(1)(√2)=2√2/3 again. At |p|=√2, the intersection discriminant vanishes and the two curves meet at one tangency point. The horizontal separation L=√(p²−2) tends to zero as |p| approaches √2 from above. Consequently the enclosed area tends to zero. For |p|<√2, the separation formula would require a square root of a negative number. That signals there is no real lens, not a negative or complex geometric area. This connection between discriminant and enclosed area gives a useful qualitative check: the region appears at the tangency threshold and grows as the intersection points separate. Two genuine quadratic graphs have a difference of degree at most two, so they can intersect at most twice unless they are identical. Therefore, with two distinct intersections, there is at most one bounded region formed solely between them. No third sign region can appear inside the two roots. For higher-degree curves, the difference may have three or more real zeros. Then several separate bounded regions may need to be integrated and their magnitudes added. The simple single-interval formula is particularly convenient for parabolas because their difference has a manageable root structure. Do not automatically extend it to arbitrary cubic or trigonometric graphs. Upper and lower are relative descriptions. The upper curve has the larger y-value, even when both curves lie below y=0. For example, y=−1 is above y=−4, despite both being negative. A positive vertical gap is (−1)−(−4)=3. Therefore, area between curves does not require splitting at the x-axis unless the axis is itself an additional boundary of the requested region. This is a useful distinction from “total area between one curve and the x-axis”, where sign changes of that curve determine whether absolute values are needed. For an enclosed two-curve lens, use their difference directly. A graphing calculator can display the two parabolas and indicate their intersection inputs. It can also estimate the area numerically. But a plot may round exact surd intersections, obscure a small bounded region or suggest the wrong upper curve when the display is heavily zoomed. Exact algebra supplies the intersections and vertical-gap sign. Integration then yields a reproducible expression such as 16√2/3. Use technology to check approximate values and geometry, not to replace the proof that the integrand is non-negative over the chosen interval or that no additional bounded region was omitted. First set f(x)=g(x) and solve all real intersections. Identify the two distinct inputs p Second determine the sign of g−f between those points. Write upper minus lower as a non-negative quadratic expression. Third integrate the difference exactly from p to q. Where useful, use symmetry or the proven formula |a|(q−p)³/6 for a quadratic difference with leading coefficient a≠0. Fourth state positive square units and verify the result against the width and maximum gap. If two distinct intersections do not exist, reconsider whether the stated curves alone bound a finite region. Question one: find the area between y=x² and y=4−x². Answer: 16√2/3 square units. Question two: find the intersection points in Question one. Answer: (−√2,2) and (√2,2). Question three: find the area between y=x² and y=2(x−1)². Answer: 8√2/3. Question four: find the area between y=x² and y=−x²+6x−4. Answer: 1/3, between x=1 and x=2. Question five: a quadratic difference has leading-coefficient magnitude 3 and roots separated by 4. Enclosed area: 3·4³/6=32. Question six: y=x² and y=x²+3. Do they enclose a finite region by themselves? No, because the curves do not intersect. Question seven: for g_p=−x²+2px−1 and f=x², find when a bounded lens exists. Answer: |p|>√2, with area (p²−2)^(3/2)/3. Consider f(x)=−x² and g(x)=−2(x−1)²+1. Both parabolas open downward, but their curvatures differ. The difference is g−f=−2(x²−2x+1)+1+x²=−x²+4x−1. Set this to zero to find x²−4x+1=0. The two intersection inputs are x=2±√3, separated by L=2√3. Since the difference has leading coefficient −1 and is positive between the roots, g is the upper curve. The enclosed area is |−1|(2√3)³/6=24√3/6=4√3 square units. This demonstrates that two downward-opening parabolas can enclose a finite lens just as two upward-opening parabolas can. Take any pair of curves f and g defining an enclosed region. Add the same constant C to both functions, producing F(x)=f(x)+C and G(x)=g(x)+C. Their difference remains G−F=(g+C)−(f+C)=g−f. Thus their intersection inputs and vertical gap are unchanged. Consequently the enclosed area is exactly the same. Shifting both parabolas upward or downward together changes their absolute y-coordinates but not the area between them. This provides a useful conceptual check. If a student computes two different enclosed areas for a pair of graphs differing only by a common vertical translation, some boundary or subtraction error has occurred. Suppose both parabolas are shifted right by h units. Their new formulas are F(x)=f(x−h) and G(x)=g(x−h). If the original curves intersect at p and q, the shifted curves intersect at p+h and q+h. The horizontal separation remains q−p. Their vertical difference is the same function of the shifted coordinate u=x−h. Substituting u into the integral preserves the enclosed area. This confirms why the quadratic-gap formula depends on the difference in intersection inputs rather than their absolute coordinates. A translated bounded region has the same size and shape, even though it appears in another part of the coordinate plane. For two parabolas with leading coefficients a₁ and a₂, the quadratic coefficient of g−f is a₂−a₁. If their intersection separation is L and a₂≠a₁, the enclosed area is |a₂−a₁|L³/6. Holding L fixed, doubling the magnitude of the curvature difference doubles the area. Holding the coefficient difference fixed, doubling L multiplies the area by eight. The two mechanisms are distinct: the curvature difference changes the vertical gap at every relative position, while horizontal separation changes both the width and the maximum gap. This gives a useful dimensional and graphical check when a parameter alters one parabola’s shape or moves the intersection points. Define the average vertical separation over the intersection interval by taking the enclosed area and dividing by the interval width L. Using A=|a|L³/6 gives average gap A/L=|a|L²/6. The maximum gap is H=|a|L²/4. Therefore average gap divided by maximum gap is (1/6)/(1/4)=2/3. For the opening example, H=4, so its average vertical gap is 8/3. Multiplying this by the width 2√2 recovers A=16√2/3. This connection helps students link area to average function value. The constant-height rectangle with height 8/3 has the same area as the curved gap over the same horizontal span. For g−f=−x²+4x−1, an antiderivative is F(x)=−x³/3+2x²−x. The bounds are 2−√3 and 2+√3. An efficient substitution is u=x−2, under which the difference becomes 3−u² and the bounds become −√3 and √3. Therefore the area is ∫_(−√3)^(√3)(3−u²)du. By even symmetry, this equals 2[3u−u³/3]₀^(√3). The bracket gives 3√3−√3=2√3. Doubling produces 4√3, confirming the shortcut independently. Area between two intersecting parabolas joins quadratic simultaneous equations, sign charts, graph comparison and exact definite integration. The general gap formula is enrichment that becomes accessible once the basic upper-minus-lower method is understood. For Singapore, consult the relevant SEAB syllabus listings for 2026 O-Level Additional Mathematics or 2027 SEC G3, matching the student’s actual taught syllabus. Related eduKateSG guides include How to Find the Area Between a Parabola and Its Chord, How to Integrate an Absolute-Value Quadratic Across Its Roots, How to Find a Function’s Average Value from a Definite Integral and the Additional Mathematics archive. Families may enquire about suitable eduKate Singapore three-student Mathematics tutorials near Sixth Avenue MRT. The lasting skill is turning two quadratic graphs into one signed difference whose roots, sign and definite integral completely describe the enclosed area. Properly taught kids shine a bright light into the future.
Find the enclosed region before integrating
Solve the simultaneous curve equations
Determine which parabola lies above the other
Write the exact area integral
Integrate the difference exactly
Use even symmetry to shorten the integral
Check the area against a bounding rectangle
The difference of two quadratics is another quadratic
Factor the quadratic difference at the intersections
Derive the enclosed-area shortcut
Verify the shortcut in the opening example
Both parabolas can open upward and still enclose a region
Find the upward–upward area by the general formula
A downward–upward example with integer intersections
Compute the integer-bound example directly
The quadratic gap has its maximum at the midpoint
Do not mistake the area for one parabola’s integral
The order of subtraction is part of the mathematical meaning
Tangency is not the same as two distinct crossings
No real intersections means no bounded region of this type
Equal curvatures generally give a linear difference
A parameter controls whether the parabolas cross
Find the parameter-dependent intersection separation
Check one parameter value with exact arithmetic
The parameter threshold is a geometric transition
What if the curves cross more than twice?
A curve can be below the x-axis and still be the upper boundary
A numerical graph is a check, not a proof
A concise exam solution structure
Practice problems with checked answers
A second downward-opening pair with an exact surd area
Vertical translation of both curves leaves the area unchanged
A common horizontal shift also preserves the area
The coefficient difference controls the width–area relationship
The average vertical gap is two-thirds of its maximum
A direct integration check for the second downward pair
Syllabus suitability and connected reading
