VIEW THIS AS

Auto mode follows the Route Engine until you choose a viewpoint.

YOU ARE HERE

ROUTE CHECK

CONNECTED TO

WHAT NEXT

Use the canonical route for this room, or HELP if you are unsure.

Additional Mathematics Tutor Singapore | Polynomial Long Division, Remainder and Factor Theorem

Mathematics textbooks stand behind an open notebook containing written working and a graph, with a calculator and pens alongside.

Additional Mathematics Tutor Singapore · SEC 2027 G2 K232 and G3 K341 · Polynomials, remainders, factors and long division

Did you know that finding the remainder after dividing a polynomial by x−3 can take only one substitution? A student may spend half a page arranging long division, subtracting lines and carrying negative signs. Yet when the question asks only for the remainder, the polynomial’s value at three gives it immediately. When it asks for the entire quotient, the division steps become important again. Learning to distinguish those targets can save both time and mistakes.

Polynomial problems are an ideal example of why Additional Mathematics is not only faster algebra. Students must recognise a factor, use a theorem under the right condition, find unknown coefficients, solve cubic equations and check an expression by multiplying back. A learner who sees every problem as the same long-division routine may still lose marks by selecting an unnecessarily complicated method.

This guide is written for Singapore Secondary 3/4 A-Math students and parents looking for an Additional Mathematics tutor. Both the 2027 SEC G2 K232 syllabus and G3 K341 syllabus explicitly include multiplication and division of polynomials, remainder and factor theorems, cubic equations, and sum and difference of cubes. We’ll develop the method with real working and show how to check answers, rather than predict future exam questions.

eduKate Mathematics Tuition · 11-second introduction
Polynomial long division, factor theorem and worked examples

Quick answer: how do I divide a polynomial correctly?

Write the polynomial in descending powers, inserting zero coefficients for missing powers. For division by x−a, synthetic division can efficiently find quotient coefficients and the remainder. For more general polynomial divisors, long division works by cancelling the highest remaining power at each stage. Stop when the remainder degree is below the divisor degree.

The fundamental check is P(x)=D(x)Q(x)+R(x), where P is the original dividend, D the divisor, Q the quotient and R the remainder. When D(x)=x−a, the remainder theorem gives R=P(a). If P(a)=0, the factor theorem says x−a is a factor of P(x).

A long-division calculation is a polynomial identity

Numbers offer a familiar analogy: 29=4×7+1. The quotient is seven and remainder one. Polynomials behave similarly, except the quotient and remainder may themselves be expressions. For example, x²+3x+2 divided by x+1 gives quotient x+2 and zero remainder, since (x+1)(x+2)=x²+3x+2.

If the divisor is linear, a remainder is a constant. For division by a quadratic divisor, the remainder can be linear because its degree must be strictly lower than the divisor’s degree. That explains why simply substituting one x-value is sufficient for a linear divisor but not, by itself, a complete general quadratic-divisor remainder method.

Long division step by step: one cubic example

Divide P(x)=2x³−3x²−11x+6 by x−3. The first quotient term is 2x² because 2x³ divided by x is 2x². Multiply back: 2x²(x−3)=2x³−6x². Subtract from the starting polynomial’s leading terms and obtain 3x²−11x+6.

The next quotient term is +3x because 3x² divided by x is 3x. Multiply 3x(x−3)=3x²−9x and subtract to obtain −2x+6. The final quotient term is −2; its product with x−3 is −2x+6 and the remainder is zero.

Thus P(x)=(x−3)(2x²+3x−2). The quadratic factorises as (2x−1)(x+2), so the cubic’s roots are x=3, x=1/2 and x=−2. Expanding all three factors checks the result. The initial calculation is longer than needed for a remainder-only question, but it is appropriate when the quotient or full factorisation is required.

Synthetic division: the same information, fewer symbols

For divisor x−3, write the polynomial coefficients 2, −3, −11, 6. Bring down two. Multiply by three to obtain six, add to −3 to obtain three. Multiply that by three to obtain nine, add to −11 to obtain −2. Multiply −2 by three to get −6 and add to six to obtain remainder zero.

The quotient coefficients are 2, 3, −2, representing 2x²+3x−2. Notice that synthetic division did not eliminate the need to interpret the result: the final entry is the remainder, and all preceding entries form the quotient in descending powers.

A tutor should help students understand why these repeated multiply-add steps reproduce polynomial division. The method is not a magic table; it is a compressed way to build the identity P(x)=(x−a)Q(x)+P(a).

The sign of the divisor controls the synthetic number

Dividing by x−4 uses a=4. Dividing by x+4 uses a=−4 because x+4=x−(−4). Confusing these signs is one of the most frequent mistakes. The same distinction appears in the remainder theorem: the remainder for division by x+4 is P(−4), not P(4).

For a divisor 2x−3, its root is x=3/2. The remainder is P(3/2), but ordinary synthetic division using the monic divisor x−3/2 gives a different quotient scale from division by 2x−3. State which divisor is actually being used when interpreting quotient coefficients.

Missing powers must appear as zero coefficients

If P(x)=x⁴−3x²+2, the coefficient list is 1,0,−3,0,2. Omitting the missing x³ and x terms shifts every later coefficient into the wrong column. This is a notation error that often produces an apparently smooth but completely incorrect synthetic-division result.

I ask learners to read the polynomial aloud by degree before writing a table: fourth power one, third power zero, second power minus three, first power zero, constant two. That short step is particularly valuable under time pressure.

Remainder theorem: choose substitution when only the remainder is requested

If P(x)=x³−4x²+x+6, the remainder on division by x−2 is P(2)=8−16+2+6=0. If the divisor is x+1, the remainder is P(−1)=−1−4−1+6=0. Both x−2 and x+1 are factors, and those conclusions follow without full long division.

If instead P(2) were five, the remainder would be five and x−2 would not be a factor. The theorem provides a direct check on a longer calculation, but does not by itself list all remaining factors of a higher-degree polynomial.

Factor theorem: a zero remainder identifies a linear factor

Suppose P(x)=x³−6x²+11x−6. Evaluate P(1)=1−6+11−6=0, so x−1 is a factor. Divide to obtain x²−5x+6, then factorise as (x−2)(x−3). Therefore P=(x−1)(x−2)(x−3).

The important reasoning is sequential. A zero evaluation establishes one factor. Dividing reduces the degree. Solving the remaining quadratic finds the other roots. Reporting only x=1 would be incomplete if the question asks to factorise fully or solve P(x)=0.

Unknown coefficients from remainder information

Let P(x)=x³+ax²+bx+6, and suppose x−1 is a factor and division by x−2 leaves remainder four. The first condition gives P(1)=1+a+b+6=0, so a+b=−7.

The second condition gives P(2)=8+4a+2b+6=4, or 4a+2b=−10, hence 2a+b=−5. Subtracting a+b=−7 gives a=2, and thus b=−9. The polynomial is x³+2x²−9x+6.

Verify both conditions rather than trusting the simultaneous equations alone: P(1)=1+2−9+6=0 and P(2)=8+8−18+6=4. This is a good example of translating words into algebra before computing.

Difference and sum of cubes

For any a and b, a³−b³=(a−b)(a²+ab+b²), while a³+b³=(a+b)(a²−ab+b²). These identities are explicitly within the SEC G2 and G3 polynomial syllabus content and support factorisation of cubics without first guessing individual roots.

For example, 8x³−27=(2x−3)(4x²+6x+9). Similarly, x³+8=(x+2)(x²−2x+4). Expand either proposed factorisation to verify that the middle terms cancel. The quadratic factor may or may not produce additional real roots; the question’s required domain determines the final statement.

A cubic may have repeated factors

The polynomial (x−2)²(x+1) has a repeated root x=2 and a simple root x=−1. Solving P(x)=0 means listing the distinct roots, but explaining factorisation should retain multiplicities. In a graph, a repeated quadratic factor can make a polynomial touch rather than cross the horizontal axis locally.

A useful check is to expand (x−2)²(x+1)=x³−3x²+4. Synthetic division by x−2 first gives quotient x²−x−2 with remainder zero, and dividing that quotient by x−2 again gives x+1 with remainder zero.

Polynomial division connects to partial fractions

Before decomposing a rational function into partial fractions, an improper fraction may need polynomial division. For example, (x²+1)/(x−1)=x+1+2/(x−1). The quotient x+1 comes from long division and the remainder two stays over the original divisor.

This relation is a common reason students need polynomial division even after mastering the factor theorem. The coefficient rules connect to rational algebra rather than existing as isolated procedures. Keep x≠1 as an original denominator restriction.

Twenty synthetic-division examples with verified remainders

Each original example below was constructed from a divisor, a polynomial quotient and a stated remainder, then checked by the identity P=(x−a)Q+R. They show why synthetic division requires accurate coefficients, the correct divisor sign and interpretation of the final entry. Use the table steps yourself before reading the answer.

Synthetic-division clinic 1: a 3-degree dividend

Divide P(x) = x^3 − 6x^2 + 11x − 6 by x − 1.

The quotient is Q(x) = x^2 − 5x + 6 and the remainder is 0. Write P(x) = (x − 1)(x^2 − 5x + 6). Bring the leading coefficient down, then repeatedly multiply by 1 and add the next coefficient. This synthetic-division row gives the quotient entries followed by 0.

Substitute x = 1 into P(x); the remainder theorem gives P(1) = 0. Multiplying (x − 1) by Q(x) and adding the remainder restores every coefficient of the original polynomial. Because the remainder is zero, x − 1 is an actual factor.

Synthetic-division clinic 2: a 3-degree dividend

Divide P(x) = 2x^3 − 3x^2 − 11x + 6 by x − 3.

The quotient is Q(x) = 2x^2 + 3x − 2 and the remainder is 0. Write P(x) = (x − 3)(2x^2 + 3x − 2). Bring the leading coefficient down, then repeatedly multiply by 3 and add the next coefficient. This synthetic-division row gives the quotient entries followed by 0.

Substitute x = 3 into P(x); the remainder theorem gives P(3) = 0. Multiplying (x − 3) by Q(x) and adding the remainder restores every coefficient of the original polynomial. Because the remainder is zero, x − 3 is an actual factor.

Synthetic-division clinic 3: a 3-degree dividend

Divide P(x) = x^3 + 2x^2 − 4x − 8 by x + 2.

The quotient is Q(x) = x^2 − 4 and the remainder is 0. Write P(x) = (x + 2)(x^2 − 4). Bring the leading coefficient down, then repeatedly multiply by -2 and add the next coefficient. This synthetic-division row gives the quotient entries followed by 0.

Substitute x = -2 into P(x); the remainder theorem gives P(-2) = 0. Multiplying (x + 2) by Q(x) and adding the remainder restores every coefficient of the original polynomial. Because the remainder is zero, x + 2 is an actual factor.

Synthetic-division clinic 4: a 3-degree dividend

Divide P(x) = x^3 − 6x^2 + 11x − 3 by x − 2.

The quotient is Q(x) = x^2 − 4x + 3 and the remainder is 3. Write P(x) = (x − 2)(x^2 − 4x + 3) + 3. Bring the leading coefficient down, then repeatedly multiply by 2 and add the next coefficient. This synthetic-division row gives the quotient entries followed by 3.

Substitute x = 2 into P(x); the remainder theorem gives P(2) = 3. Multiplying (x − 2) by Q(x) and adding the remainder restores every coefficient of the original polynomial. Because the remainder is non-zero, x − 2 is not a factor.

Synthetic-division clinic 5: a 3-degree dividend

Divide P(x) = 2x^3 + x^2 + 4x + 3 by x + 1.

The quotient is Q(x) = 2x^2 − x + 5 and the remainder is -2. Write P(x) = (x + 1)(2x^2 − x + 5) − 2. Bring the leading coefficient down, then repeatedly multiply by -1 and add the next coefficient. This synthetic-division row gives the quotient entries followed by -2.

Substitute x = -1 into P(x); the remainder theorem gives P(-1) = -2. Multiplying (x + 1) by Q(x) and adding the remainder restores every coefficient of the original polynomial. Because the remainder is non-zero, x + 1 is not a factor.

Synthetic-division clinic 6: a 3-degree dividend

Divide P(x) = 3x^3 − 12x^2 − 7x + 29 by x − 4.

The quotient is Q(x) = 3x^2 − 7 and the remainder is 1. Write P(x) = (x − 4)(3x^2 − 7) + 1. Bring the leading coefficient down, then repeatedly multiply by 4 and add the next coefficient. This synthetic-division row gives the quotient entries followed by 1.

Substitute x = 4 into P(x); the remainder theorem gives P(4) = 1. Multiplying (x − 4) by Q(x) and adding the remainder restores every coefficient of the original polynomial. Because the remainder is non-zero, x − 4 is not a factor.

Synthetic-division clinic 7: a 4-degree dividend

Divide P(x) = x^4 − 3x^3 + 2x^2 + 4x − 9 by x − 1.

The quotient is Q(x) = x^3 − 2x^2 + 4 and the remainder is -5. Write P(x) = (x − 1)(x^3 − 2x^2 + 4) − 5. Bring the leading coefficient down, then repeatedly multiply by 1 and add the next coefficient. This synthetic-division row gives the quotient entries followed by -5.

Substitute x = 1 into P(x); the remainder theorem gives P(1) = -5. Multiplying (x − 1) by Q(x) and adding the remainder restores every coefficient of the original polynomial. Because the remainder is non-zero, x − 1 is not a factor.

Synthetic-division clinic 8: a 4-degree dividend

Divide P(x) = 2x^4 + 5x^3 − x^2 − 4x + 6 by x + 2.

The quotient is Q(x) = 2x^3 + x^2 − 3x + 2 and the remainder is 2. Write P(x) = (x + 2)(2x^3 + x^2 − 3x + 2) + 2. Bring the leading coefficient down, then repeatedly multiply by -2 and add the next coefficient. This synthetic-division row gives the quotient entries followed by 2.

Substitute x = -2 into P(x); the remainder theorem gives P(-2) = 2. Multiplying (x + 2) by Q(x) and adding the remainder restores every coefficient of the original polynomial. Because the remainder is non-zero, x + 2 is not a factor.

Synthetic-division clinic 9: a 4-degree dividend

Divide P(x) = x^4 − 3x^3 − 5x^2 + 15x by x − 3.

The quotient is Q(x) = x^3 − 5x and the remainder is 0. Write P(x) = (x − 3)(x^3 − 5x). Bring the leading coefficient down, then repeatedly multiply by 3 and add the next coefficient. This synthetic-division row gives the quotient entries followed by 0.

Substitute x = 3 into P(x); the remainder theorem gives P(3) = 0. Multiplying (x − 3) by Q(x) and adding the remainder restores every coefficient of the original polynomial. Because the remainder is zero, x − 3 is an actual factor.

Synthetic-division clinic 10: a 3-degree dividend

Divide P(x) = x^3 + 3x^2 + 3x + 1 by x + 1.

The quotient is Q(x) = x^2 + 2x + 1 and the remainder is 0. Write P(x) = (x + 1)(x^2 + 2x + 1). Bring the leading coefficient down, then repeatedly multiply by -1 and add the next coefficient. This synthetic-division row gives the quotient entries followed by 0.

Substitute x = -1 into P(x); the remainder theorem gives P(-1) = 0. Multiplying (x + 1) by Q(x) and adding the remainder restores every coefficient of the original polynomial. Because the remainder is zero, x + 1 is an actual factor.

Synthetic-division clinic 11: a 3-degree dividend

Divide P(x) = 2x^3 − 10x^2 + 16x − 8 by x − 2.

The quotient is Q(x) = 2x^2 − 6x + 4 and the remainder is 0. Write P(x) = (x − 2)(2x^2 − 6x + 4). Bring the leading coefficient down, then repeatedly multiply by 2 and add the next coefficient. This synthetic-division row gives the quotient entries followed by 0.

Substitute x = 2 into P(x); the remainder theorem gives P(2) = 0. Multiplying (x − 2) by Q(x) and adding the remainder restores every coefficient of the original polynomial. Because the remainder is zero, x − 2 is an actual factor.

Synthetic-division clinic 12: a 3-degree dividend

Divide P(x) = −x^3 + 5x^2 − 7x + 9 by x − 1.

The quotient is Q(x) = −x^2 + 4x − 3 and the remainder is 6. Write P(x) = (x − 1)(−x^2 + 4x − 3) + 6. Bring the leading coefficient down, then repeatedly multiply by 1 and add the next coefficient. This synthetic-division row gives the quotient entries followed by 6.

Substitute x = 1 into P(x); the remainder theorem gives P(1) = 6. Multiplying (x − 1) by Q(x) and adding the remainder restores every coefficient of the original polynomial. Because the remainder is non-zero, x − 1 is not a factor.

Synthetic-division clinic 13: a 3-degree dividend

Divide P(x) = 3x^3 + 5x^2 − 10x + 5 by x + 3.

The quotient is Q(x) = 3x^2 − 4x + 2 and the remainder is -1. Write P(x) = (x + 3)(3x^2 − 4x + 2) − 1. Bring the leading coefficient down, then repeatedly multiply by -3 and add the next coefficient. This synthetic-division row gives the quotient entries followed by -1.

Substitute x = -3 into P(x); the remainder theorem gives P(-3) = -1. Multiplying (x + 3) by Q(x) and adding the remainder restores every coefficient of the original polynomial. Because the remainder is non-zero, x + 3 is not a factor.

Synthetic-division clinic 14: a 4-degree dividend

Divide P(x) = x^4 − 2x^3 − 16x + 32 by x − 2.

The quotient is Q(x) = x^3 − 16 and the remainder is 0. Write P(x) = (x − 2)(x^3 − 16). Bring the leading coefficient down, then repeatedly multiply by 2 and add the next coefficient. This synthetic-division row gives the quotient entries followed by 0.

Substitute x = 2 into P(x); the remainder theorem gives P(2) = 0. Multiplying (x − 2) by Q(x) and adding the remainder restores every coefficient of the original polynomial. Because the remainder is zero, x − 2 is an actual factor.

Synthetic-division clinic 15: a 4-degree dividend

Divide P(x) = 2x^4 + 2x^3 + 3x^2 + 4x + 5 by x + 1.

The quotient is Q(x) = 2x^3 + 3x + 1 and the remainder is 4. Write P(x) = (x + 1)(2x^3 + 3x + 1) + 4. Bring the leading coefficient down, then repeatedly multiply by -1 and add the next coefficient. This synthetic-division row gives the quotient entries followed by 4.

Substitute x = -1 into P(x); the remainder theorem gives P(-1) = 4. Multiplying (x + 1) by Q(x) and adding the remainder restores every coefficient of the original polynomial. Because the remainder is non-zero, x + 1 is not a factor.

Synthetic-division clinic 16: a 3-degree dividend

Divide P(x) = x^3 − x^2 − 8x + 12 by x − 2.

The quotient is Q(x) = x^2 + x − 6 and the remainder is 0. Write P(x) = (x − 2)(x^2 + x − 6). Bring the leading coefficient down, then repeatedly multiply by 2 and add the next coefficient. This synthetic-division row gives the quotient entries followed by 0.

Substitute x = 2 into P(x); the remainder theorem gives P(2) = 0. Multiplying (x − 2) by Q(x) and adding the remainder restores every coefficient of the original polynomial. Because the remainder is zero, x − 2 is an actual factor.

Synthetic-division clinic 17: a 3-degree dividend

Divide P(x) = 4x^3 − 6x^2 + 3x + 1 by x − 1.

The quotient is Q(x) = 4x^2 − 2x + 1 and the remainder is 2. Write P(x) = (x − 1)(4x^2 − 2x + 1) + 2. Bring the leading coefficient down, then repeatedly multiply by 1 and add the next coefficient. This synthetic-division row gives the quotient entries followed by 2.

Substitute x = 1 into P(x); the remainder theorem gives P(1) = 2. Multiplying (x − 1) by Q(x) and adding the remainder restores every coefficient of the original polynomial. Because the remainder is non-zero, x − 1 is not a factor.

Synthetic-division clinic 18: a 3-degree dividend

Divide P(x) = x^3 − x^2 − 4x + 4 by x + 2.

The quotient is Q(x) = x^2 − 3x + 2 and the remainder is 0. Write P(x) = (x + 2)(x^2 − 3x + 2). Bring the leading coefficient down, then repeatedly multiply by -2 and add the next coefficient. This synthetic-division row gives the quotient entries followed by 0.

Substitute x = -2 into P(x); the remainder theorem gives P(-2) = 0. Multiplying (x + 2) by Q(x) and adding the remainder restores every coefficient of the original polynomial. Because the remainder is zero, x + 2 is an actual factor.

Synthetic-division clinic 19: a 3-degree dividend

Divide P(x) = 2x^3 − 6x^2 − 8x + 21 by x − 3.

The quotient is Q(x) = 2x^2 − 8 and the remainder is -3. Write P(x) = (x − 3)(2x^2 − 8) − 3. Bring the leading coefficient down, then repeatedly multiply by 3 and add the next coefficient. This synthetic-division row gives the quotient entries followed by -3.

Substitute x = 3 into P(x); the remainder theorem gives P(3) = -3. Multiplying (x − 3) by Q(x) and adding the remainder restores every coefficient of the original polynomial. Because the remainder is non-zero, x − 3 is not a factor.

Synthetic-division clinic 20: a 4-degree dividend

Divide P(x) = x^4 + x^3 − x^2 − x by x + 1.

The quotient is Q(x) = x^3 − x and the remainder is 0. Write P(x) = (x + 1)(x^3 − x). Bring the leading coefficient down, then repeatedly multiply by -1 and add the next coefficient. This synthetic-division row gives the quotient entries followed by 0.

Substitute x = -1 into P(x); the remainder theorem gives P(-1) = 0. Multiplying (x + 1) by Q(x) and adding the remainder restores every coefficient of the original polynomial. Because the remainder is zero, x + 1 is an actual factor.

Twenty-seven application questions: factors, unknowns and cubic equations

These short original problems focus on choosing among the remainder theorem, factor theorem, factorisation and full division. Notice when an evaluation answers the question immediately and when the quotient or remaining roots are still needed.

Applied example 1: Remainder of a quadratic

Question: Find the remainder on dividing 3x²−5x+2 by x−2.

Solution: The remainder is P(2)=12−10+2=4. The factor theorem says x−2 is not a factor because the remainder is not zero.

Method note: Use x=2 for x−2, not x=−2.

Applied example 2: Remainder with a plus sign

Question: Find the remainder for x³+2x+3 divided by x+1.

Solution: Evaluate P(−1)=−1−2+3=0. Therefore x+1 is a factor, with quotient x²−x+3.

Method note: The divisor’s root is minus one.

Applied example 3: Factor theorem from a zero

Question: Show that x−3 divides x³−6x²+11x−6.

Solution: Evaluate P(3)=27−54+33−6=0. Hence x−3 is a factor of the polynomial.

Method note: A factor statement requires zero remainder.

Applied example 4: Complete factorisation of a cubic

Question: Factorise x³−6x²+11x−6.

Solution: Since P(1)=0, divide by x−1 to get x²−5x+6=(x−2)(x−3). Thus P=(x−1)(x−2)(x−3).

Method note: Multiplication verifies every factor and coefficient.

Applied example 5: An easy cubic with a repeated root

Question: Factorise x³−3x²+4.

Solution: Evaluate P(2)=8−12+4=0. Divide by x−2 to get x²−x−2=(x−2)(x+1), hence P=(x−2)²(x+1).

Method note: Keep the second copy of the repeated factor.

Applied example 6: Difference of cubes

Question: Factorise 27x³−8.

Solution: Recognise (3x)³−2³, giving (3x−2)(9x²+6x+4).

Method note: The plus sign in the middle quadratic is important.

Applied example 7: Sum of cubes

Question: Factorise x³+27.

Solution: Use x³+3³=(x+3)(x²−3x+9).

Method note: The quadratic’s middle sign is minus for a sum of cubes.

Applied example 8: A factor with a parameter

Question: If x−2 divides x³+kx²−4x+4, find k.

Solution: Set P(2)=8+4k−8+4=0, giving 4k+4=0 and k=−1.

Method note: Write the factor condition before expanding.

Applied example 9: Remainder with a parameter

Question: If division of 2x³+ax−1 by x−1 leaves remainder five, find a.

Solution: Set P(1)=2+a−1=5, hence a=4.

Method note: A non-zero remainder does not imply a factor.

Applied example 10: Two conditions on coefficients

Question: P(x)=x²+ax+b has P(1)=3 and P(2)=8. Find a,b.

Solution: The conditions give 1+a+b=3 and 4+2a+b=8. Subtracting yields a=2 and then b=0.

Method note: Use both equations to determine two unknowns.

Applied example 11: Factor root sign

Question: Which linear factor corresponds to P(−4)=0?

Solution: The factor theorem gives x−(−4)=x+4.

Method note: P(−4)=0 does not give x−4.

Applied example 12: Remainder zero from constant coefficient

Question: Find the remainder of P(x)=5x⁴−2x²+7 by x.

Solution: The divisor is x−0, so the remainder is P(0)=7.

Method note: For division by x, the constant term is the remainder.

Applied example 13: A polynomial with missing powers

Question: Find the remainder of x⁴−3x²+2 on division by x−1.

Solution: P(1)=1−3+2=0. For synthetic division, use coefficients 1,0,−3,0,2.

Method note: Never omit zero coefficients.

Applied example 14: Division into linear plus remainder

Question: Express x²+1 in the form (x−1)Q(x)+R.

Solution: x²+1=(x−1)(x+1)+2, so Q=x+1 and R=2.

Method note: Checking by multiplication recovers the original.

Applied example 15: A monic quadratic divisor

Question: Divide x³−1 by x−1.

Solution: Difference of cubes gives x³−1=(x−1)(x²+x+1), so the quotient is x²+x+1 and remainder zero.

Method note: Factorisation can be quicker than long division.

Applied example 16: A non-monic linear divisor

Question: Divide 2x²+3x+1 by 2x+1.

Solution: Factor 2x²+3x+1=(2x+1)(x+1). Quotient is x+1 and remainder zero.

Method note: Using the root −1/2 gives the remainder but not the correct quotient scale automatically.

Applied example 17: A quadratic divisor and linear remainder

Question: Divide x³+2x²+3x+4 by x²+1.

Solution: Leading x gives x³+x; subtract leaves 2x²+2x+4. Next term +2 gives 2x²+2; subtract leaves 2x+2. Thus quotient x+2, remainder 2x+2.

Method note: The remainder degree one is lower than divisor degree two.

Applied example 18: Cubic root with rational factor

Question: Solve 2x³−3x²−11x+6=0.

Solution: The polynomial factors as (x−3)(2x−1)(x+2). The real roots are 3, 1/2 and −2.

Method note: Check each proposed root by direct substitution.

Applied example 19: A repeated factor from first division

Question: For P=x³−3x²+4, what happens after dividing once by x−2?

Solution: The quotient is x²−x−2=(x−2)(x+1). Thus x−2 divides the original twice.

Method note: The factor theorem can be applied again to the quotient.

Applied example 20: A quotient whose remainder is nonzero

Question: Divide x²+3x+4 by x+1.

Solution: The quotient is x+2 and the remainder two, since (x+1)(x+2)+2=x²+3x+4.

Method note: A non-zero remainder does not make the division incorrect.

Applied example 21: A factor theorem counterexample

Question: Is x−2 a factor of x²−5x+5?

Solution: P(2)=4−10+5=−1, not zero, so x−2 is not a factor.

Method note: One non-zero evaluation disproves the proposed factor.

Applied example 22: Cubic factor from a sign choice

Question: Is x+2 a factor of x³+6x²+12x+8?

Solution: At x=−2, P=−8+24−24+8=0. Indeed P=(x+2)³.

Method note: All three factors are equal here.

Applied example 23: Two factors and a quadratic

Question: Factorise x⁴−5x²+4.

Solution: Let t=x². Then t²−5t+4=(t−1)(t−4). Thus P=(x−1)(x+1)(x−2)(x+2).

Method note: A substitution helps recognise a quadratic in x².

Applied example 24: Division by a factor of a factored cubic

Question: Divide (x−1)(x−2)(x−3) by x−2.

Solution: The quotient is (x−1)(x−3)=x²−4x+3, remainder zero.

Method note: Never expand solely because the question mentions division.

Applied example 25: An unknown constant from a factor

Question: If x+3 is a factor of x³+5x²+cx−9, find c.

Solution: P(−3)=−27+45−3c−9=9−3c=0. Thus c=3.

Method note: The evaluation is at −3, not positive three.

Applied example 26: Factorisation before solving

Question: Solve x³−4x=0.

Solution: Factor out x: x(x²−4)=x(x−2)(x+2)=0, giving x=0, 2 or −2.

Method note: Search for an obvious common factor before testing many candidates.

Applied example 27: A simple remainder pair

Question: For P=x²+3x+2, find remainders on division by x−1 and x+1.

Solution: P(1)=6 and P(−1)=1−3+2=0. Thus x+1 is a factor, while x−1 is not.

Method note: Different divisors require different evaluation inputs.

How to use twenty synthetic-division problems effectively

Do not attempt all twenty in one rushed sitting. Work through a few with different divisor signs, then hide the quotient and remainder and reproduce the steps on blank paper. Use the remainder theorem to test the numerical result before looking at the provided answer.

Return after a delay to a problem containing a missing power, a negative leading coefficient or a non-zero remainder. The goal is to know what each coefficient in the row means, not merely reproduce a familiar table. If the learner makes the same error, identify the first faulty multiply-add step or the divisor sign and repair it directly.

A practical four-week learning sequence

Week 1 revisits polynomial multiplication, factorisation, missing powers and algebraic signs. Week 2 introduces linear-divisor long division and synthetic division, with product checks. Week 3 uses remainder and factor theorems to find parameters and cubic roots. Week 4 mixes theorem choice, exact factorisation and rational-fraction applications without headings announcing the required technique.

The timetable should follow the learner’s real school syllabus and progress. A student weak in the distributive law may need foundational work first; a confident student may benefit more from parameter puzzles or explaining how a cubic factorisation connects to its graph. More examples without diagnosis are not automatically better teaching.

Frequently asked questions about polynomial long division

Is polynomial division in the 2027 SEC G2 and G3 Additional Mathematics syllabuses?

Yes. K232 and K341 explicitly include polynomial multiplication and division, remainder and factor theorems, factorising polynomials and solving cubic equations.

Can I always use synthetic division?

The familiar compact synthetic scheme is straightforward for linear monic divisors x−a. More general polynomial divisors may require long division or an appropriately adapted method.

What is the remainder when dividing by x−a?

It is P(a), the original polynomial’s value when x=a. This shortcut is the remainder theorem.

Does P(a)=0 mean x−a is a factor?

Yes. That is the factor theorem, because the remainder on division by x−a is zero.

What is the most common synthetic-division sign mistake?

Using −a for the divisor x−a, or +a for x+a. Rewrite the divisor as x−a and read its root before making the coefficient row.

What if a polynomial has missing powers?

Include zero coefficients for each missing degree in a synthetic-division table. Leaving a blank column out shifts every later operation.

Does a factor theorem result prove all roots?

No. It establishes one factor. Divide by it and solve the remaining polynomial, checking any repeated or non-real possibilities as requested.

What is the remainder for a quadratic divisor?

Its degree must be below two, so the remainder can be linear. A single substitution does not generally determine both coefficients of an unknown linear remainder.

Can division be checked quickly?

Multiply divisor by quotient, then add the remainder. The result must equal the original polynomial identically.

Why do partial fractions require polynomial division sometimes?

An improper rational expression may need to be split into a polynomial quotient plus a proper fraction before decomposition. Division gives that quotient and remainder.

Can a cubic have the same root twice?

Yes. For example, (x−2)²(x+1)=0 has a repeated root at two. A full factorisation preserves multiplicity.

Will memorising these examples guarantee my examination mark?

No. They build techniques and checks within the syllabus, but final performance depends on independent understanding and the entire examination scope.

Official references and connected algebra lessons

Check the 2027 SEC G2 Additional Mathematics K232 syllabus and G3 K341 syllabus for the formal polynomial division, remainder/factor theorem and cubic scope. Both levels cover these foundational skills, while their complete algebra syllabuses are not identical.

For the wider topic, use polynomials, theorems and partial fractions. For related rational work, see algebraic fractions and equations, and for selecting methods in mixed questions, simultaneous equations and quadratic inequalities.

The immutable Clementi Mathematics small-group reference illustrates our standard of carefully sequenced teaching and close feedback. Families considering tuition can contact eduKate Singapore or enquire on WhatsApp with current school work and the child’s subject level.

Next Additional Mathematics learning resources

Use these related explanations when their methods address the learner’s actual difficulty. A-Math algebra, exact values, coordinate reasoning and G3 binomial expansions connect, but their examination content should be selected according to the current school syllabus and subject level.

Choose the theorem that answers the question

The best polynomial solution is not always the longest. If only a remainder is requested, evaluate P(a). If a factor must be proved, show that the remainder is zero. If a quotient is requested, divide accurately and check by multiplication. If all roots are wanted, continue factorising and solving the reduced polynomial.

A student who understands these distinctions can approach new questions independently rather than apply the same procedure everywhere. Our teaching base is 8 Fourth Avenue, Singapore 268674, near Sixth Avenue MRT. Confirm current class arrangements and availability directly. Properly taught kids shine a bright light into the future.