A definite integral measures signed area: regions above the x-axis contribute positively, while regions below contribute negatively. When a question asks for total geometric area, the answer cannot be negative. Find the curve’s zeros, split the interval at each sign change, and add the absolute values of the separate integrals. For an area between two curves, integrate the upper function minus the lower function on each interval where their order is fixed.
Students commonly evaluate one integral correctly but give the wrong area because positive and negative regions cancel. Parents can check the underlying understanding by asking where the graph crosses the axis and which curve lies above the other. This guide gives worked examples, sign checks, integration methods and independent practice for interpreting the answer rather than just calculating it.
- Find the limits and all zeros or intersections inside them.
- For geometric area, integrate a nonnegative height or split at sign changes.
- For two curves, use upper minus lower and change order where needed.
- Do not confuse |∫f(x)dx| with ∫|f(x)|dx.
- Check the antiderivative, limits, sign and square units.
2027 SEC G3 Additional Mathematics: What Is Examined?
For the 2027 SEC G3 Additional Mathematics K341 syllabus, definite integrals, areas bounded by a curve and line(s), and areas below the x-axis are included. The syllabus explicitly excludes the area of a region between two curves. Examples involving a curve and a straight line (including horizontal lines) fall within the stated curve-and-line scope. Examples involving two non-linear curves are optional extension practice rather than required K341 examination content. Prioritise the assessed curve-and-line and x-axis area methods when preparing for SEC.
Official Singapore G3 Syllabus Context
Refer to the 2027 SEAB G3 syllabus directory and the K341 Additional Mathematics syllabus for the applicable examination scope. These worked examples are teaching material rather than official examination questions.
Worked Example 1: Integrate y=x−1 from 0 to 2
∫₀²(x−1)dx=0, but total geometric area is 1.
The governing principle is: A definite integral is signed area. To find total geometric area between a curve and the x-axis, split at its zeros and add the absolute values of the integrals. Identify which part of the question determines the method, show the calculation clearly, and check the result against the original expression. If an algebraic candidate violates the stated assumptions, it is not a valid final answer.
For a changed-number exercise, replace one coefficient or boundary in this example and solve again without hints. Explain which conditions remain unchanged and which numerical results differ. This checks whether the student understands the structure rather than recalling the specific answer.
Worked Example 2: Find area under y=x² from 0 to 3
∫₀³x²dx=[x³/3]₀³=9.
The governing principle is: A definite integral is signed area. To find total geometric area between a curve and the x-axis, split at its zeros and add the absolute values of the integrals. Identify which part of the question determines the method, show the calculation clearly, and check the result against the original expression. If an algebraic candidate violates the stated assumptions, it is not a valid final answer.
For a changed-number exercise, replace one coefficient or boundary in this example and solve again without hints. Explain which conditions remain unchanged and which numerical results differ. This checks whether the student understands the structure rather than recalling the specific answer.
Worked Example 3: Find area between y=4−x² and the x-axis from −2 to 2
∫₋₂²(4−x²)dx=32/3.
The governing principle is: A definite integral is signed area. To find total geometric area between a curve and the x-axis, split at its zeros and add the absolute values of the integrals. Identify which part of the question determines the method, show the calculation clearly, and check the result against the original expression. If an algebraic candidate violates the stated assumptions, it is not a valid final answer.
For a changed-number exercise, replace one coefficient or boundary in this example and solve again without hints. Explain which conditions remain unchanged and which numerical results differ. This checks whether the student understands the structure rather than recalling the specific answer.
Worked Example 4: Find total area for y=x²−1 on −2≤x≤2
Split at −1 and 1; total area 4.
The governing principle is: A definite integral is signed area. To find total geometric area between a curve and the x-axis, split at its zeros and add the absolute values of the integrals. Identify which part of the question determines the method, show the calculation clearly, and check the result against the original expression. If an algebraic candidate violates the stated assumptions, it is not a valid final answer.
For a changed-number exercise, replace one coefficient or boundary in this example and solve again without hints. Explain which conditions remain unchanged and which numerical results differ. This checks whether the student understands the structure rather than recalling the specific answer.
A Fourteen-Day Improvement Programme
Days 1–2: Definitions and Interpretation
Use two short study sessions focused on definite integration and nonnegative geometric areas. Begin by stating the rule and relevant conditions. Work one familiar and one changed example, then verify the result independently. Record the first incorrect line and return to that specific skill after a delay. This builds confidence through accurate reasoning rather than repetition alone.
Days 3–4: Prerequisite Algebra Repair
Use two short study sessions focused on definite integration and nonnegative geometric areas. Begin by stating the rule and relevant conditions. Work one familiar and one changed example, then verify the result independently. Record the first incorrect line and return to that specific skill after a delay. This builds confidence through accurate reasoning rather than repetition alone.
Days 5–6: First Worked Examples
Use two short study sessions focused on definite integration and nonnegative geometric areas. Begin by stating the rule and relevant conditions. Work one familiar and one changed example, then verify the result independently. Record the first incorrect line and return to that specific skill after a delay. This builds confidence through accurate reasoning rather than repetition alone.
Days 7–8: Changed-Number Practice
Use two short study sessions focused on definite integration and nonnegative geometric areas. Begin by stating the rule and relevant conditions. Work one familiar and one changed example, then verify the result independently. Record the first incorrect line and return to that specific skill after a delay. This builds confidence through accurate reasoning rather than repetition alone.
Days 9–10: Verification and Common Errors
Use two short study sessions focused on definite integration and nonnegative geometric areas. Begin by stating the rule and relevant conditions. Work one familiar and one changed example, then verify the result independently. Record the first incorrect line and return to that specific skill after a delay. This builds confidence through accurate reasoning rather than repetition alone.
Days 11–12: Unseen Mixed Problems
Use two short study sessions focused on definite integration and nonnegative geometric areas. Begin by stating the rule and relevant conditions. Work one familiar and one changed example, then verify the result independently. Record the first incorrect line and return to that specific skill after a delay. This builds confidence through accurate reasoning rather than repetition alone.
Days 13–14: Delayed Retesting
Use two short study sessions focused on definite integration and nonnegative geometric areas. Begin by stating the rule and relevant conditions. Work one familiar and one changed example, then verify the result independently. Record the first incorrect line and return to that specific skill after a delay. This builds confidence through accurate reasoning rather than repetition alone.
Independent Practice and Answer Checks
Question: Integrate y=x−1 from 0 to 2. Checked result: ∫₀²(x−1)dx=0, but total geometric area is 1. Students should reconstruct the steps, justify the chosen method and verify the result without copying the answer line.
Question: Find area under y=x² from 0 to 3. Checked result: ∫₀³x²dx=[x³/3]₀³=9. Students should reconstruct the steps, justify the chosen method and verify the result without copying the answer line.
Question: Find area between y=4−x² and the x-axis from −2 to 2. Checked result: ∫₋₂²(4−x²)dx=32/3. Students should reconstruct the steps, justify the chosen method and verify the result without copying the answer line.
Question: Find total area for y=x²−1 on −2≤x≤2. Checked result: Split at −1 and 1; total area 4. Students should reconstruct the steps, justify the chosen method and verify the result without copying the answer line.
What Parents Can Look for
Ask the learner what must be true before the first calculation, why the selected rule applies, and how the final result is checked. In a small three-student tutorial, the tutor can identify whether a learner’s weakness is conceptual, algebraic or presentational. An unseen replacement question after several days provides better evidence of learning than immediate repetition.
Connected Additional Mathematics Learning
Continue through the Additional Mathematics improvement guide and the subject hub. Families can review eduKate Singapore tuition information when additional diagnosis is useful.
Negative integral
For y=x−2 on [0,1], the integral is −3/2. The geometric area is positive 3/2 because the curve lies below the axis.
Cancellation
For y=x−1 on [0,2], the integral is zero, but the total geometric area is one. Split at x=1 into two triangles of area 1/2 each.
Above the axis
For y=4−x² on [−2,2], the area is 32/3. Symmetry gives twice the integral from zero to two.
Two crossings
For y=x²−1 on [−2,2], zeros occur at −1 and one. The outer areas total 8/3 and the central area is 4/3, so total area is four.
Between two curves
For y=4 and y=x² on [−2,2], the upper curve is four. Area is the integral of 4−x², giving 32/3.
Crossing line and curve
For y=x and y=x² on [0,1], the line lies above the parabola. Area is ∫₀¹(x−x²)dx=1/6.
A signed-area check
Before integrating, find intersections and identify which curve is above. Reversing upper minus lower produces a negative signed result, not a negative geometric area.
Units
If x and y are lengths measured in centimetres, area has square-centimetre units. An indefinite integral needs +C; a definite integral uses bounds and has no arbitrary final constant.
Practice
Find the area between y=2x and y=x² for 0≤x≤2. Integrate 2x−x² to obtain 4/3 square units.
Audit: Signed Integrals and Geometric Areas Are Different
The definite integral of y=x−1 from x=0 to x=2 is zero because its negative and positive triangular regions cancel. Its total geometric area is one square unit: one-half below the axis and one-half above. The absolute value of the final integral is still zero, so it cannot replace splitting at the crossing. The correct procedure is to locate zeros, divide the interval and add the absolute values of the separate integrals.
Audit: Correct Area for a Curve Crossing Twice
For y=x²−1 on [−2,2], the zeros are −1 and one. The two outer positive regions have total area 8/3; the middle negative region has geometric area 4/3. Thus total geometric area is four square units. The signed integral is 4/3, because the central region subtracts rather than adds. These two results answer different questions and should not be confused.
Audit: Upper Minus Lower for Two Curves
For y=2x and y=x² on 0≤x≤2, the line lies above the parabola because 2x−x²=x(2−x)≥0. The area between them is ∫₀²(2x−x²)dx=[x²−x³/3]₀²=4−8/3=4/3 square units. Identify the upper curve before integrating. If the curves switch order, split the interval at their intersection and change the subtraction order.
Independent Area Retest
Find the area between y=3 and y=x on 0≤x≤2: ∫₀²(3−x)dx=4 square units. Find the area between y=x and the x-axis on −1≤x≤1: the two triangular regions each have area one-half, so total area is one. Find the signed integral over the same interval: zero. These questions test whether the learner can distinguish upper-minus-lower, signed cancellation and nonnegative area.
Worked Example: The Area Between a Curve and a Straight Line
Find the area enclosed by y=2x and y=x². Intersections satisfy x²=2x, giving x=0 or x=2. On 0
Worked Example: An Area Split at an Interior Crossing
Find total area between y=x²−1 and the x-axis on −2≤x≤2. The zeros are −1 and one. On the two outer intervals the function is positive, while on (−1,1) it is negative. The outer areas each equal ∫₁²(x²−1)dx=4/3, giving 8/3 together. The middle area is −∫₋₁¹(x²−1)dx=4/3. Total area is 8/3+4/3=4. The signed integral over the whole interval would be 4/3, which is not the requested total area.
Worked Example: A Curve Entirely Below the Axis
For y=−x²−1 on 0≤x≤2, the function is always negative. The definite integral is [−x³/3−x]₀²=−8/3−2=−14/3. The geometric area between the curve and the axis is 14/3 square units. No internal splitting is necessary because the curve never changes sign. A student can determine this immediately from −x²−1<0 for all real x.
Worked Example: A Line and a Horizontal Boundary
Find the area between y=3 and y=x on 0≤x≤2. Since 3>x throughout the interval, area is ∫₀²(3−x)dx=[3x−x²/2]₀²=6−2=4 square units. If the interval extended beyond x=3, the curves would switch order at x=3 and the calculation would need to be split. The correct integral depends on which curve is upper over each part of the interval.
Why Absolute Value Must Be Applied Before Integration
The total geometric area between y=f(x) and the x-axis over [a,b] is ∫ₐᵇ|f(x)|dx, not generally |∫ₐᵇf(x)dx|. The first prevents positive and negative regions from cancelling; the second takes the magnitude only after cancellation has already occurred. For f(x)=x on [−1,1], the signed integral is zero, but the integral of |x| is one. A sign chart and splitting at zeros turn this definition into a practical calculation.
Independent Area Practice
Find the area between y=4−x² and the x-axis on −2≤x≤2: 32/3. Find the area between y=x and the axis on −1≤x≤1: one. Find the area between y=2x and y=x² on 0≤x≤2: 4/3. Find the area under y=x² on 0≤x≤3: nine. For each, mark any crossings, identify the nonnegative integrand used for area, evaluate the antiderivative at both limits and state square units.
A Reliable Area-Finding Algorithm
First draw or describe the relevant curves and identify the interval. Next solve for intersections with the x-axis or with each other. These points divide the interval into regions where the vertical ordering does not change. On each region integrate the upper function minus the lower function, or integrate the absolute value when measuring area from the x-axis. Add the resulting nonnegative areas and state square units. A single unsplit integral is safe only when the sign or ordering remains consistent throughout the interval.
Worked Example: A Parabola Above and Below the Axis
Find total area between y=x²−4 and the x-axis on −3≤x≤3. The zeros are −2 and two. On [−3,−2] and [2,3] the curve is positive; on [−2,2] it is negative. By symmetry, the outer areas total 2∫₂³(x²−4)dx. An antiderivative is x³/3−4x; the value from two to three is (9−12)−(8/3−8)=7/3, so the outer total is 14/3. The middle area is −∫₋₂²(x²−4)dx=32/3. Total geometric area is 46/3 square units. A sign chart explains why the three contributions are added rather than cancelled.
Worked Example: Two Curves Switch Order (Optional Extension)
Find the area between y=x² and y=2−x² on −1≤x≤1. Their intersections satisfy x²=2−x², so x=±1. Throughout −1 Find the area between y=x² and y=1 over −2≤x≤2. The curves meet at x=−1 and x=1. For |x|>1, x² is above one; for |x|<1, one is above x². By symmetry, total area is 2∫₁²(x²−1)dx+∫₋₁¹(1−x²)dx. The first integral equals 4/3, so the outer regions contribute 8/3. The central integral is 4/3. Total area is four square units. A single integral of x²−1 would produce a signed value of 4/3 and miss the required absolute regions. For y=3−x on [0,4], the zero occurs at x=3. The area above the axis on [0,3] is 9/2, and the area below on [3,4] is 1/2, giving total area five square units. The signed integral over [0,4] is four. Explain why both answers are correct for different questions. Then find the area between y=2 and y=x over [0,3]; split at x=2 to obtain two plus one-half, or 5/2 square units. These exercises test the decision to split before doing the arithmetic. An indefinite integral describes a family of antiderivatives: ∫2x dx=x²+C. A definite integral over [a,b] is evaluated by the difference F(b)−F(a), so the constant cancels. For example ∫₁³2x dx=(9+C)−(1+C)=8. Including +C in a final definite-integral value is unnecessary. Students should distinguish a function family from a numerical signed area, even though the same integration rule appears in both calculations. Find the area enclosed by y=x² and y=x+2. Solve x²=x+2 to get (x−2)(x+1)=0, so the intersections occur at x=−1 and x=2. At x=0, the line has height two and the parabola zero, so the line is above between the intersections. Area is ∫₋₁²(x+2−x²)dx. An antiderivative is x²/2+2x−x³/3. Its value at two is 2+4−8/3=10/3, and at −1 is 1/2−2+1/3=−7/6. The difference is 10/3+7/6=9/2 square units. Find the area between y=9−x² and the x-axis. The intercepts are x=−3 and x=3, and the curve is nonnegative between them. By symmetry, area equals 2∫₀³(9−x²)dx=2[9x−x³/3]₀³=2(27−9)=36 square units. Symmetry reduces the arithmetic, but it is valid because the graph and interval are symmetric about the y-axis. If the interval were asymmetric, doubling one side would not give the requested total. Consider y=|x−1| on 0≤x≤3. The curve is nonnegative, so its area is the integral of |x−1|. Split at x=1: on [0,1] the expression is 1−x, giving area one-half; on [1,3] it is x−1, giving area two. Total area is 5/2 square units. This illustrates that a modulus function can require piecewise integration even though its graph never lies below the x-axis. For y=k−x² on −2≤x≤2, suppose k≥4. Then k−x²≥0 throughout the interval, so the area between the curve and the x-axis is ∫₋₂²(k−x²)dx=4k−16/3. If the required area is 32/3, solve 4k−16/3=32/3 to get 4k=16, hence k=4, consistent with the assumption k≥4. If the computed k had violated the sign assumption, the interval would need splitting before the area formula could be used. Check every answer against four questions: where do the curves intersect; which graph is higher on each interval; is the integrand nonnegative for the area being calculated; and are the limits and square units correct? Use a rough sketch or sign chart before integrating. Then differentiate the proposed antiderivative to check the integration step. A plausible positive number is not sufficient if it was obtained by ignoring a region where the curve changes sign. Find the area between y=(x−1)² and the x-axis on 0≤x≤2. The function is nonnegative and touches the axis at x=1 without crossing it, so there is no negative region. The area is ∫₀²(x−1)²dx=[(x−1)³/3]₀²=(1−(−1))/3=2/3 square units. A repeated zero does not require changing the sign of the integrand. Checking the sign on either side of a root helps distinguish a crossing from a touch. For y=sin x on 0≤x≤π, the function is nonnegative. The area between the curve and the x-axis is ∫₀^π sin x dx=[−cos x]₀^π=−(−1)−(−1)=2 square units. On π≤x≤2π, sin x is nonpositive, so the geometric area is −∫_π^{2π}sin x dx=2. The total geometric area over one full period is four, although the signed integral over 0≤x≤2π is zero. This reinforces the sign principle in a different function family. For y=e^x on 0≤x≤1, the curve is strictly positive. Its area is ∫₀¹e^x dx=[e^x]₀¹=e−1 square units. For y=−e^x on the same interval, the signed integral is 1−e, but the geometric area is again e−1. Multiplying a curve by −1 reflects it across the x-axis and changes the sign of the integral without changing the magnitude of the area over the same bounds. Suppose ∫₀²(kx+1)dx=10. Integrate to obtain [kx²/2+x]₀²=2k+2. Therefore 2k+2=10 and k=4. If the question instead asks for geometric area, verify the sign of kx+1 over the interval before identifying the integral with area. With k=4 the integrand is positive throughout, so both interpretations agree. This shows how an integral can determine a coefficient, not just produce a numerical answer. Find the enclosed area between y=x² and y=2x. Set the curves equal: x²=2x, giving x=0 and x=2. Those are the natural integration limits for the enclosed region. On 0 Check that the interval matches the stated region, that all x-axis zeros and curve intersections inside it have been found, and that each integrand is upper minus lower or otherwise nonnegative for geometric area. Evaluate the antiderivative carefully at both limits, including brackets for negative limits. Confirm the result is nonnegative and attach square units when axes represent lengths. A second method, such as symmetry or a simple geometric triangle, can provide an independent reasonableness check. Consider y=x² and the tangent line at x=1. Since dy/dx=2x, the tangent has gradient two and passes through (1,1), giving y=2x−1. The difference between the parabola and the tangent is x²−(2x−1)=(x−1)², nonnegative for all real x. On 0≤x≤2, the area between them is ∫₀²(x−1)²dx=2/3 square units. The graphs touch at x=1 without crossing, so the upper-minus-lower order does not change there. For y=x²+1 and y=1 over −2≤x≤2, the difference is x², which is nonnegative throughout. The area is ∫₋₂²x²dx=[x³/3]₋₂²=16/3 square units. The two curves touch at x=0 but do not cross. This is a case where a repeated intersection does not require splitting because the sign of the difference remains unchanged. Find the area between y=x²−x and the x-axis on −1≤x≤2. The zeros are x=0 and x=1. On [−1,0] the function is positive, on [0,1] it is negative, and on [1,2] it is positive. An antiderivative is F(x)=x³/3−x²/2. The first area is F(0)−F(−1)=5/6. The middle area is −[F(1)−F(0)]=1/6. The final area is F(2)−F(1)=5/6. Total geometric area is 11/6 square units. The signed integral would be 3/2, which differs from the total area. For y=x³ on 0≤x≤2, the curve is nonnegative and touches the axis only at x=0. Its area is ∫₀²x³dx=[x⁴/4]₀²=4 square units. On −2≤x≤2, the same function is negative on the left and positive on the right, so its signed integral is zero while total geometric area is eight. This illustrates how the chosen interval changes the need for a sign split even when the function is unchanged. For any integrable f, ∫_b^a f(x)dx=−∫_a^b f(x)dx. For example, ∫₂⁰x dx=−2, whereas ∫₀²x dx=2. Reversing the bounds changes the orientation of the signed integral; it does not produce a negative geometric area. When solving an area question, use the lower x-bound as the first limit and the upper bound as the second, or explicitly correct the sign if the order is reversed. Find ∫₀²(3x²−2x)dx=[x³−x²]₀²=4. This is a signed integral. For the geometric area between y=3x²−2x and the axis on [0,2], note the zeros at x=0 and x=2/3. The function is negative on (0,2/3) and positive afterward. The negative part has magnitude 4/27, while the positive part is 4+4/27, giving total area 4+8/27=116/27 square units. The difference between these two answers is exactly the contribution that would otherwise cancel. For y=2x on 0≤x≤3, the graph is a straight line from (0,0) to (3,6). Its area is a triangle with base three and height six, so area equals nine square units. Integration gives ∫₀³2x dx=[x²]₀³=9. Agreement between elementary geometry and calculus verifies both the antiderivative and the limits. When a region is triangular or rectangular, a geometric check can be faster than redoing the integration. Find the total area between y=x(x−2) and the x-axis on 0≤x≤3. The zeros are zero and two. The function is negative on (0,2) and positive on (2,3). An antiderivative is F(x)=x³/3−x². The negative integral from zero to two is F(2)−F(0)=8/3−4=−4/3, giving area 4/3. The positive integral from two to three is F(3)−F(2)=(9−9)−(−4/3)=4/3. Total geometric area is 8/3 square units, while signed displacement-like area is zero. On 0≤x≤ln2, e^x rises from one to two. The horizontal line y=2 lies above the curve throughout the interval, meeting it at the right endpoint. The enclosed vertical area is ∫₀^{ln2}(2−e^x)dx=[2x−e^x]₀^{ln2}=2ln2−2−(−1)=2ln2−1. This is positive because ln2 is approximately 0.693. The example shows that upper-minus-lower reasoning works for non-polynomial functions as well. For f(x)=x³ on −a≤x≤a with a>0, the signed integral is zero because x³ is odd and the interval is symmetric. However, the geometric area is 2∫₀ᵃx³dx=2(a⁴/4)=a⁴/2. For a=2, this gives eight square units. Symmetry is useful, but it must be applied to the quantity asked: an odd function cancels in a signed integral, whereas total area adds both halves. Locate all intersections and sign changes, order the curves vertically on each interval, choose an integrand that represents nonnegative area, evaluate the antiderivative at the correct bounds and include square units. If a result is negative for a geometric area, recheck upper-minus-lower order and whether the curve crosses the axis. If the integral is zero but the sketch contains visible regions, check whether positive and negative contributions cancelled. Find total area between y=x³−x and the x-axis on −2≤x≤2. The zeros are −1, zero and one. The function is odd, so the geometric area is twice its area on [0,2]. On (0,1), x³−x is negative; on (1,2), it is positive. An antiderivative is F(x)=x⁴/4−x²/2. The middle positive magnitude on [0,1] is −[F(1)−F(0)]=1/4. The positive area on [1,2] is F(2)−F(1)=2−(−1/4)=9/4. Thus the total area is 2(1/4+9/4)=5 square units. The signed integral over the symmetric interval is zero. Find the area enclosed by y=x²−2x and y=x. Equate them: x²−2x=x, giving x(x−3)=0, so intersections are at zero and three. On 0 Let y=kx on 0≤x≤2 with k≥0. The curve is nonnegative, so its geometric area is ∫₀²kx dx=[kx²/2]₀²=2k. If the area is ten square units, k=5. If k were negative, the signed integral would be negative and the geometric area would instead be −2k. The assumption k≥0 is what makes the direct integral equal to area. Parameter conditions must be checked before interpreting a signed integral geometrically. For y=6x−x², the x-intercepts are zero and six. Between them, x(6−x)≥0, so the enclosed area is ∫₀⁶(6x−x²)dx=[3x²−x³/3]₀⁶=108−72=36 square units. The vertex is at x=3, y=9, so the result is smaller than the rectangle of width six and height nine, whose area is 54. This geometric bound is a useful reasonableness check. If the curve crosses the x-axis, a single integral can conceal positive and negative regions through cancellation. Before evaluating, mark every real zero inside the interval and test the sign on each resulting subinterval. For example, x²−1 changes sign at −1 and one, while (x−1)² only touches zero and never becomes negative. The multiplicity and sign of the factors determine whether a split changes the integrand’s sign. A sketch can reveal this even before the exact calculation. Find the geometric area under y=2−x on [0,3]. The zero is x=2. The positive triangular area on [0,2] is two, and the negative-region magnitude on [2,3] is one-half, so total area is 5/2. The signed integral is 3/2. Find the area between y=x² and y=4 over [−2,2]: 32/3. For both, explain the sign of the chosen integrand and why the final geometric area cannot be negative.Worked Example: A Horizontal Line Crossing a Curve Twice
Self-Test: Explain the Sign Before Integrating
Why an Antiderivative Needs a Constant but a Definite Integral Does Not
A Parabola and a Straight Line with Two Intersections
A Symmetric Area Calculation
A Piecewise Absolute-Value Area
An Area Question with a Parameter
A Final Area Audit
A Curve with a Repeated x-Intercept
A Trigonometric Curve Above the Axis
An Exponential Curve and the Axis
A Definite Integral with an Unknown Parameter
Why Intersections Determine Limits
Final Area Verification Checklist
The Area Between a Parabola and Its Tangent
Area Between a Curve and a Constant Below It
Two Regions with Unequal Sizes
A Nonnegative Curve with a Zero at the Endpoint
A Definite Integral with Reversed Limits
A Final Area Self-Test
A Triangle as an Independent Integral Check
A Curve Crossing the Axis at an Endpoint and Inside
Area Between an Exponential Curve and a Horizontal Line
A Symmetric Odd Function and Signed Cancellation
A Final Two-Minute Area Checklist
Worked Example: An Area with Three Sign Regions
Worked Example: Area Between a Line and a Parabola
Worked Example: A Parameterised Area
Worked Example: An Area Bounded by a Quadratic and the Axis
How to Detect a Missing Region
Final Area Practice
