VIEW THIS AS

Auto mode follows the Route Engine until you choose a viewpoint.

YOU ARE HERE

ROUTE CHECK

CONNECTED TO

WHAT NEXT

Use the canonical route for this room, or HELP if you are unsure.

Secondary 1 G1 Mathematics Tuition Commonwealth | Ratios, Sharing and Comparing Quantities

Secondary 1 G1 Mathematics tuition for Commonwealth families gives pupils time to show how they read a question, build a ratio model and check whether their answer fits the situation. At eduKateSG, three pupils meet for a 90-minute lesson each week. Families can enquire about the current G1 group, teaching venue and available times before deciding how a lesson would fit into the school week.

A pupil may be able to simplify 12 to 18 and still hesitate when a problem shares 72 counters in the ratio 2 to 3 to 4. The challenge is deciding what the numbers in the ratio stand for. This guide shows students how to link a given total, a single share or a difference to the correct number of equal units. Parents can use the worked examples and diagnostic to see which part of the process deserves more practice.

  • Write the quantities in the stated order before doing any calculation.
  • Use the sum of the ratio numbers when the question gives the combined total of all the named shares.
  • Use just the relevant ratio number when the question gives one share.
  • Subtract the relevant ratio numbers when the question gives the difference between two shares.
  • Convert measurements to the same unit and distinguish a comparison between parts from a comparison with the whole.
  • Try a changed question after each correction and follow the national examination syllabus for the pupil’s own cohort.

Find your next learning step

Core concepts and worked examples
Practice, support and SEC preparation

Read the ratio before deciding what to divide

A Commonwealth Secondary 1 pupil sees a tray with 12 blue counters, 18 white counters and 24 orange counters. Asked to compare blue, white and orange in that order, the pupil can write 12 : 18 : 24. All three numbers divide by six, so the simplified ratio is 2 : 3 : 4. Read that as two equal units of blue, three of white and four of orange. Each unit contains six counters in this tray. The figures 2, 3 and 4 describe the relative sizes of the shares. A second tray with 8 blue, 12 white and 16 orange counters has the same ratio and a different number of counters in every share.

Write colour labels above the numbers. With orange written first, blue second and white third, the same tray gives 4 : 2 : 3. The labels keep the maths connected to the question. This small step helps the student who can simplify accurately but copies the answer in the order that comes most naturally. When a word problem says “the ratio of white to orange to blue”, underline the three names as a group. Write the names in order before turning them into a number sentence.

The G1 Mathematics syllabus by school year includes ratio comparison, equivalent ratios, simplification and sharing in a given ratio in its Secondary One content. It also includes ratios involving fractions and decimals. The examples below put those ideas to work in situations where the total or one share may be missing. Your child’s teacher can confirm the current chapter, sequence of lessons and expectations for written working.

Keep the value of one unit separate from its label

In a ratio model, every unit within one problem has the same size. That size can be six counters, eight dollars, half a litre or any other quantity that fits the problem. Suppose two containers hold water in the ratio 2 : 5 and the smaller container holds 6 litres. Two units correspond to 6 litres, so one unit corresponds to 3 litres. The larger container holds five units, or 15 litres. The quantities are 6 and 15 litres. The relationship can still be written in its simplest form as 2 : 5.

A student who treats the 5 as five litres switches from a relationship to a measurement halfway through. Ask them to write the word “units” after the ratio numbers and “litres” after the measured amounts for the first few practice questions. Then ask which line tells us the value of one unit. In this example the answer is the line “2 units = 6 litres”. The clarification matters even if the child arrived at 15 by mental arithmetic. On a less familiar problem, it lets the child recover the method without waiting to be shown.

For a second example, imagine red and green ribbons in the ratio 4 : 7. A red ribbon measures 28 centimetres. The unit value is 7 centimetres. The green ribbon measures 49 centimetres. The number 7 appears as the green ratio number and also as the number of centimetres in a unit. These sevens describe different things. Read the second step in full as “seven units of green, each 7 centimetres long”. This example gives pupils a simple way to notice that identical numbers can have different jobs in one calculation.

Check whether the ratio is a description or an instruction

A recipe may say to mix ingredients in a ratio. A survey question may ask a pupil to describe the ratio already present. A sharing question may give a total and instruct a pupil how to divide it. The arithmetic sometimes looks similar, so start by identifying which figures are given and what the final answer should measure. “What is the ratio?” asks for a comparison in the stated order. “How many does each person receive?” asks for quantities. “How much more?” asks for the difference between two quantities.

Imagine a shop window display with 15 large cards and 25 small cards. If the question asks for the ratio of large to small, 3 : 5 describes the display. If the cards are rearranged but the counts stay the same, the ratio remains 3 : 5. If half of the small cards are removed, a physical count is impossible because 25 cannot be split into two equal groups of whole cards. That practical issue comes from what is being counted. In a question about litres, halving 25 litres would make sense. The model and the wording both help the student choose a valid answer.

Contents · Next chapter

Share a fixed total using all the parts

A club divides 72 counters among three teams. The teams receive counters in the ratio 2 : 3 : 4, in that order. Two plus three plus four gives nine equal units altogether. Divide 72 counters by nine to get eight counters per unit. Multiply eight by 2, 3 and 4. The teams receive 16, 24 and 32 counters respectively. Check that 16 + 24 + 32 gives 72, then simplify 16 : 24 : 32 by eight to confirm that the required ratio is restored.

These two checks do different jobs. The sum checks that every counter has been accounted for. Simplification checks that each group received the intended relative share. Three equal groups of 24 also make a total of 72, so adding alone cannot confirm the result. Likewise 8, 12 and 16 simplify to 2 : 3 : 4, yet use only 36 counters. A pupil can point to the two conditions in the original question and match each to one check at the end.

Use a bar, a list or a table to keep the groups visible

A bar model works well when the ratio numbers are small. Draw two equal boxes for the first team, three for the second and four for the third. Add a bracket for the combined total of 72. This makes it easy to see why the denominator is nine rather than three. Counting the groups tells you the number of teams. Counting the boxes tells you the number of equal units across all teams. The two counts match only in certain special cases.

The same work can fit in a table with three columns for team, number of units and number of counters. A first row can show 2 and 16, a second 3 and 24, a third 4 and 32. A total row shows 9 and 72. For many pupils a table is easier to extend when four groups are involved or when they need to mark a value that is unknown. A bar is useful for seeing a relationship. A table is useful for preserving the labels. Pupils can use the representation they understand and translate to the other when it helps explain a mistake.

Try a variant with 84 labels shared as 1 : 2 : 4. Seven units represent 84 labels, so a unit is 12 labels. The shares are 12, 24 and 48. Ask the pupil to compare the first and third before calculating. The third should be four times the first, and the total of the first two should be 36. A prediction gives the learner a reason to question a slip such as multiplying 12 by three for the last share.

Think about whether the objects can be split

A paper puzzle asks for 50 stickers to be divided into three whole-number shares in the ratio 2 : 3 : 4. Taken literally, it cannot be done exactly as stated. There are nine units, giving 50 ÷ 9 stickers per unit. This produces fractional values for the shares, and the problem requires whole stickers. Show the pupil why rounding each share would no longer guarantee the original ratio. If nine units shared 54 stickers instead, the exact whole shares would be 12, 18 and 24.

The same numbers can work when the total is 50 kilograms of material and fractional kilograms are allowed. A unit is 50/9 kilograms. The three exact shares are 100/9, 150/9 and 200/9 kilograms. They total 450/9 kilograms, which is 50 kilograms. A decimal display can be useful when a question asks for approximate values, and the original fractions are convenient for checking the exact sum. When a worksheet specifies a rounding instruction, carry it out after the calculation unless the question tells you to apply it at another stage.

Connect the model to an easy mental check

When a larger group has four units out of nine, it receives less than half the total because four is less than half of nine. In the 72-counter question, the largest share of 32 should be less than 36, and it is. A pupil who accidentally uses the whole sum of 72 for each group catches the issue immediately. The same reasoning helps in a question with the ratio 1 : 2 : 5. The largest share has five of the eight units, so it must be more than half the combined total.

Start with a quick question a pupil can estimate. Share 96 exercise cards in the ratio 1 : 3 : 4. The last group holds four of the eight units, which is exactly half. It should receive 48 cards. The first group gets 12 cards and the second gets 36. There are several routes to these answers. The pupil can find eight units and their value or spot the half first and split the remaining half into one unit and three units. Ask them why both routes lead to the same result.

Previous chapter · Contents · Next chapter

Find the total when a single share is given

Three groups hold tickets in the ratio 2 : 5 : 7. The middle group holds 35 tickets. The known amount belongs to five units, so one unit holds seven tickets. The first group holds 14 tickets and the last holds 49. Across all three groups there are 98 tickets. Here the question never says that 35 is the combined total. Add the 2, 5 and 7 when finding the number of units in the total, after working out the value of a unit from the middle group.

Compare the previous question with a second version. The same three groups have 35 tickets altogether in the ratio 2 : 5 : 7. Now 14 units represent 35 tickets. A unit would contain 2.5 tickets, producing shares of 5, 12.5 and 17.5. Whole tickets cannot be allocated in those exact shares. It is the word “altogether” that changes the meaning of 35. Set the two sentences beside each other and ask the pupil to underline the phrase identifying what 35 measures. Repeating this comparison with litres avoids the whole-object condition and lets the learner focus on the distinction between a share and a total.

Recover the number given through a fraction of the total

If a group has two units in the ratio 2 : 5 : 7, it has 2/14 or 1/7 of the combined total. That observation is useful when the group size is given. If this smaller group has 16 counters, the full quantity is seven times 16, or 112 counters. The other groups have 40 and 56. In the table approach, two units correspond to 16; one unit corresponds to 8; all 14 units correspond to 112. The fraction route describes the same reasoning from the perspective of the whole.

Start with the route the pupil can explain without help. A student who divides 16 by 1/7 on a calculator can still be asked to say why the answer is larger than 16. A student who draws the model can show seven copies of the two-unit group across the entire bar. Both pupils should be able to reconnect the number to its meaning. Later, offer a ratio such as 3 : 4 : 6 where the fraction for the first group is 3/13 and a pupil may prefer finding one unit over a direct fraction calculation.

Be precise about a subtotal

In the ratio 2 : 5 : 7, suppose the first two groups have 42 tickets together. The two groups account for 2 + 5, or seven units. A unit contains six tickets. The individual amounts are 12, 30 and 42. All three groups have 84 together. The last group happens also to have 42 because its seven units match the combined units of the first two groups. That coincidence is worth pointing out before calculating. The two different appearances of 42 are both correct.

On a new problem, three departments receive 3 : 4 : 8 folders and the first and third have 55 between them. A pupil should identify 11 units in that subtotal and divide 55 by 11 to get five. The shares are 15, 20 and 40, giving 75 in total. If a student instead pairs the last two groups, their subtotal would be 60. The wrong answer can come from a perfectly valid calculation applied to a group the problem did not name. Encourage them to colour or mark the two included labels before doing the sum.

Previous chapter · Contents · Next chapter

Let a difference tell you the size of a unit

Two pupils have marbles in the ratio 3 : 8. The pupil with more has 25 more than the other. The difference between eight units and three units is five units. Five units represent 25 marbles, so one unit represents five marbles. The pupils have 15 and 40 respectively. The total is 55 and the difference is 25. A pupil who uses eight plus three would be treating 25 as the sum of both shares. The phrase “25 more than” tells us to find the gap instead.

Draw three equal boxes for the smaller share and eight boxes of the same size underneath them for the larger share. Line up the left ends. Mark just the extra five boxes on the longer row with a bracket labelled 25. When the learner starts to divide, have them tap the region marked by that bracket. This habit works equally well when the given amount is a total or a single share. The bracket changes position while the model stays the same.

Identify whose shares the difference compares

Three classrooms sort pencils in the ratio 4 : 7 : 9. The third classroom sorts 20 more pencils than the second. Compare nine units with seven. Two units represent 20 pencils, so each unit contains ten pencils. The rooms sort 40, 70 and 90 pencils. Their combined number is 200. The third room sorts 50 more than the first, and that larger difference is a useful check because nine and four are five units apart.

A second version reads “the third classroom sorts 20 more pencils than the first”. Now five units represent 20 pencils. Each unit is four pencils and the rooms sort 16, 28 and 36, which total 80. Both problems have the same printed ratio and the same printed difference. The identity of the group being compared changes the answer. Ask the pupil to circle the two classroom labels in the sentence that gives the difference and to cross-reference them with the same labels on the model.

Compare a pair of groups with another group

Some questions compare one amount with the sum of two others. Suppose A, B and C get folders in the ratio 2 : 3 : 7. C receives 18 more than A and B combined. Together A and B receive five units. C receives seven, so the difference is two units. One unit represents nine folders. The shares are 18, 27 and 63, for a total of 108. Subtract the first two shares from 63 to recover 18. Taking C minus B would answer another question entirely.

Consider the same ratio with a changed sentence. “C and B together receive 24 more folders than A.” C and B account for ten units and A has two, so the difference is eight units. A unit is three folders and the shares are 6, 9 and 21. In this version the difference compares a subtotal of 30 with a single share of 6. A sketch with two brackets can guide the interpretation. Mark the first bracket around the groups being added and the second over the gap between the two quantities. Use a table when the brackets become cluttered.

Reverse a difference check to see what would be possible

In a ratio of 2 : 4 : 5, the first and third shares differ by three units. Suppose a worksheet says that difference is 14 whole counters. An exact set of whole shares is impossible. Three units would represent 14, so the shares would be 28/3, 56/3 and 70/3. Those fractions do not meet the whole-counter condition. If the difference is 15 instead, one unit is five counters and the shares are 10, 20 and 25. The answer now meets both the ratio and the condition on the objects.

With whole-number ratios, first simplify the ratio if you want to use the difference in units to reason about possible whole objects. For instance, 4 : 6 looks as if the two whole shares must differ by a multiple of two. The ratio is equivalent to 2 : 3, whose two shares may be 2 and 3, with a difference of one. A unit in the original 4 : 6 representation could be half of a counter even though the shares are whole. This is another reason to distinguish a chosen unit of modelling from an object in the problem.

Previous chapter · Contents · Next chapter

Distinguish part to part from part to whole

A bag contains 9 yellow beads and 15 purple beads. The ratio of yellow to purple is 9 : 15, or 3 : 5. The ratio of yellow to all beads is 9 : 24, or 3 : 8. The fraction of the whole that is yellow is 3/8. Each answer has its own second quantity. If a pupil says “the yellow fraction is 3/5” because they copied the two ratio numbers, ask what the 5 refers to. It stands for the purple share. The denominator for the yellow fraction needs to include both colours.

The relationship also works in reverse. If 3/8 of the beads are yellow and the rest purple, then 5/8 are purple. Both fractions describe the same whole. Comparing the numerators gives the part-to-part ratio 3 : 5. If the question says the rest are several colours, 5/8 is the combined share of those colours, and the learner cannot deduce the individual purple share without more information. Read the phrase defining the remainder before deciding how many categories the model should have.

Use one total to express three shares as fractions

At a class activity there are red, blue and green tiles in the ratio 2 : 5 : 3. There are ten units in the combined total. The red share is 2/10, the blue share 5/10, and the green share 3/10. In percentages those shares are 20%, 50% and 30%. The ratio of blue to red is 5 : 2, and the ratio of blue to everything else is 5 : 5, or 1 : 1. The word “else” includes both red and green. Make pupils say the full phrase before changing the denominator or summing categories.

Now add a condition that the red and green tiles together number 40. They are half the total, because their units add to five out of ten. The blue tiles also number 40, and the whole collection contains 80. The red group has 16 and the green has 24. This route is quicker if the learner notices the halves. A pupil who uses one unit can explain the same result by dividing 40 by five to get eight. Then ask where the first 40 and the second 40 show up in the diagram. They concern different sets.

When two wholes have different sizes, compare shares carefully

Group X puts A and B choices in the ratio 3 : 2. Group Y puts the same choices in the ratio 4 : 3. Group X has 25 recorded choices and Group Y has 70. In X, 3/5 of choices are A, so there are 15 A choices. In Y, 4/7 of choices are A, so there are 40. X has the larger share in proportion to its own total, since 3/5 is 60% and 4/7 is a little more than 57%. Y has more A choices by count. Both statements are true. A comparison needs to name whether it uses a count or a proportion.

A pupil may assume the share with numerator 4 is necessarily larger than the share with numerator 3. Draw two bars of equal length to represent 100% of each group and split them into fifths and sevenths. Alternatively express the fractions with the same denominator. The comparison becomes 21/35 versus 20/35. This is the same comparison of shares, and it makes the order exact. The real group sizes remain 25 and 70. The equal-size bars represent percentages, so their equal drawn length does not claim the groups had the same number of choices.

Previous chapter · Contents · Next chapter

Simplify ratios with decimals, fractions and measurements

A signboard plan compares lengths of 1.2 metres, 0.75 metres and 0.45 metres. Multiply each number by 100 to express the same comparison as 120 : 75 : 45. Then divide all three terms by 15 to get 8 : 5 : 3. The 100 acts on all terms, which keeps every relative size the same. One actual unit of the signboard comparison is 0.15 metres. Using centimetres would give the same simple ratio because every length was converted by the same factor.

A pupil might multiply 1.2 by 10 and the other numbers by 100 by looking at each decimal individually. The resulting 12 : 75 : 45 changes the relationship. Ask what happened to the original largest quantity. It has become the smallest term, a clue that something has gone wrong. Show the pupil how writing 1.20, 0.75 and 0.45 before multiplying can make it easier to see that all three have been changed in the same way.

Choose a common denominator for fraction terms

Three lengths are 1/2 metre, 3/4 metre and 5/8 metre. If you describe them in eighths of a metre, they are 4/8, 6/8 and 5/8. Compare the numerators to write 4 : 6 : 5. In this method the common denominator names the size of one unit, one eighth of a metre. A pupil who writes 1 : 3 : 5 by taking the printed numerators is comparing numbers of pieces where each piece has a different size. The denominator must first be the same.

Consider a ratio that includes a mixed number. Three design segments use 1¼ metres, 3/8 metre and 0.5 metre. Convert them to eighths of a metre. They become 10/8, 3/8 and 4/8. The ratio is 10 : 3 : 4. You can also multiply each original length by eight to get the same three integer terms. Ask the pupil which approach is easier when a decimal has an unfamiliar fraction form. It may help to write 0.5 as one half before finding the eighths.

Convert physical units before comparing magnitudes

The widths of three pieces of card are 75 centimetres, 1.2 metres and 900 millimetres. Convert each to centimetres. They become 75, 120 and 90 centimetres, giving 5 : 8 : 6. A student who copies 75 : 1.2 : 900 into a calculator has skipped the conversion. The resulting numbers exaggerate or shrink real widths because centimetres, metres and millimetres name different units. Before simplifying, estimate the order. The first piece is three quarters of a metre, the second a little over a metre, and the third nine tenths of a metre. The ratio should reflect that order.

Consider amounts of 0.8 kilograms, 600 grams and 1.2 kilograms. Write 800 : 600 : 1200 if you use grams. Simplify by 200 to get 4 : 3 : 6. The same approach works in kilograms by expressing the amounts as 0.8 : 0.6 : 1.2 and scaling all three by ten to get 8 : 6 : 12, then dividing by two. The two approaches produce the same comparison. A pupil can use one route to verify the other when the conversion is a source of uncertainty.

Previous chapter · Contents · Next chapter

Sometimes a question gives two comparisons involving the same group. Start by naming the amount the comparisons have in common. Suppose a tray of art materials has red and blue pieces in the ratio 2 : 3, and blue and white pieces in the ratio 4 : 5. The red-and-blue statement counts blue as three units of its own representation. The blue-and-white statement counts the same blue amount as four units of a different representation. These two sets of units are different sizes until you adjust the ratios.

Write the first comparison as 8 : 12 by multiplying both terms by four. Write the second as 12 : 15 by multiplying both terms by three. Both now describe blue as 12 units of the same size. Read the combined comparison as red to blue to white, giving 8 : 12 : 15. Check the separate statements. The first two terms simplify to 2 : 3, and the last two simplify to 4 : 5. If a student writes 2 : 3 : 5, the first comparison happens to work while the second has changed from 4 : 5 to 3 : 5. Two separate checks are better than a glance at the combined ratio.

Apply a known amount only after matching the common term

Suppose the same tray contains 70 pieces altogether. The combined ratio has 35 units, so there are two pieces per unit. This gives 16 red, 24 blue and 30 white. A check with the actual counts is quick. The red-to-blue counts simplify to 2 : 3, the blue-to-white counts simplify to 4 : 5, and the sum is 70. The blue count is 24 in both comparisons. A model that makes blue stand for two different actual counts would fail even if both ratios separately looked familiar.

Now give the pupil just the white count of 45. White is represented by 15 units, so each unit stands for three pieces. The red and blue counts are 24 and 36. There are 105 pieces altogether. If the learner instead divides by 35, ask whether 45 names the whole tray or the white group. This version brings the same known-quantity decision into a more demanding setup.

Choose a common term that keeps the numbers manageable

Drawings in three sizes have small to medium in the ratio 3 : 4 and medium to large in the ratio 2 : 5. Four is already a multiple of two. Keep the first comparison, double the second to 4 : 10 and read the combined ratio as 3 : 4 : 10. A shared medium term of eight would also work, yielding 6 : 8 : 20, which simplifies back to 3 : 4 : 10. The smaller numbers usually make the next step easier.

Try one short variation after school. Use small to medium of 2 : 5 and medium to large of 10 : 13. Ask which comparison should change and what value to give the shared term. Doubling the first comparison gives 4 : 10 and leaves the second as written. The combined comparison is 4 : 10 : 13. Let the pupil explain why the number 10 appears only once in the combined ratio. It represents the same medium group in both statements. This extension is useful after a child can already identify which share a single comparison describes.

Previous chapter · Contents · Next chapter

Diagnose the decision before practising the calculation

The following six tasks change what is given. Let the student attempt them before reading the solutions. A complete answer includes what the given amount represents and the value of one unit where that route is helpful. If a student goes straight to a correct mental answer, ask them to explain which relationship they used. That explanation gives a second way to check the answer and helps a parent choose a new question at a suitable level.

  1. A club shares 144 cards among three groups in the ratio 3 : 4 : 5. Find the number of cards each group receives.
  2. Three containers hold amounts of water in the ratio 2 : 5 : 6. The middle container holds 30 litres. Find the amount in each of the other two containers and the total amount.
  3. A workshop distributes counters among red, blue and green trays in the ratio 3 : 5 : 8. The green tray has 27 more counters than the blue tray. Find the number in each tray and the total.
  4. A box contains 16 white, 24 black and 8 purple beads. Give the ratio of white to black, the ratio of white to all beads, and the fraction of all beads that is purple. Simplify each answer.
  5. Compare lengths of 0.6 metres, 450 millimetres and 3/4 metre in that order. Give the ratio in its simplest whole-number form.
  6. A class keeps paper clips in three containers A, B and C in the ratio 2 : 3 : 7. C has 24 more paper clips than A and B combined. How many paper clips are there altogether?

Answers and what each question checks

  1. The 144 cards correspond to 3 + 4 + 5, or 12 units. A unit is 12 cards. The shares are 36, 48 and 60. An independent check is that they add to 144 and divide by 12 to give 3 : 4 : 5. If a pupil divides by three because there are three groups, place the 12 equal units visibly in the three labelled rows.
  2. The middle container’s 30 litres belong to five units. One unit is six litres. The first container holds 12 litres and the third holds 36 litres. Adding 12, 30 and 36 gives a total of 78 litres. If a pupil begins with 30 ÷ 13, have them mark the labelled middle container. Its amount is a share. Only the final total involves all 13 units.
  3. The difference between green and blue is three units, since 8 − 5 = 3. Each unit is nine counters. The trays hold 27 red, 45 blue and 72 green counters. The total is 144, and 72 − 45 gives 27. A student who obtains a different answer may have compared green with red instead. The labels around “more than” are as important as the numbers.
  4. White to black is 16 : 24, or 2 : 3. There are 48 beads overall, so white to all is 16 : 48, or 1 : 3. The purple fraction is 8/48, or 1/6. Each question names a different comparison or requires an answer of a different kind. If the pupil writes 2/3 for the white share of all beads, ask them to write the denominator’s label. They will see that it refers only to black beads.
  5. In millimetres the three lengths are 600, 450 and 750. Divide all three by 150 to get 4 : 3 : 5. The result puts the middle number below the first and last, as expected. A useful alternative is to work in metres with 0.60 : 0.45 : 0.75. Multiply all terms by 100 and then divide by 15.
  6. C has seven units and A plus B have five. The two-unit difference represents 24 clips, so a unit is 12 clips. There are 2 + 3 + 7, or 12 units altogether, giving 144 clips. The individual shares are 24, 36 and 84. Check that 84 − (24 + 36) gives 24. If a student uses the difference between C and B, have them rewrite “A and B combined” as one subtotal before subtracting.

Decide what to practise next

Check what the student knew before a correction or prompt was given. A learner who understands every situation but loses track of the labels needs a brief period of practising written order. A learner who divides by all the ratio units in questions 2 and 3 needs to distinguish the known share or difference from the total. Try a pair of questions with the same ratio and the same printed amount. Change only whether the sentence says “altogether” or “more than”. Ask the pupil to mark what the number belongs to before calculating either answer.

A pupil who gets question 1 right but misses question 6 may already understand the fixed total. Practise combined categories before revisiting ratio calculations. With 2 : 3 : 7 written on a page, ask them to name how many units A and B have altogether. Next ask how that combined amount compares with C. Only after they can say “two units fewer” introduce the 24 clips. Removing the arithmetic for a minute makes the wording easier to diagnose.

A practical follow-up for a conversion difficulty is to ask for the order of three measurements before simplifying their ratio. Give 0.9 metres, 850 millimetres and 3/4 metre. The pupil can convert to 900, 850 and 750 millimetres and predict that the order is first, second, third from largest to smallest. Dividing by 50 gives 18 : 17 : 15. If they find the order quickly but do not see the common divisor, work on common factors. If the order is wrong before division, work on the measurement relationship first.

Previous chapter · Contents · Next chapter

Make the next practice narrow enough to learn from

One sketch, one calculation and one check are enough for a short revision session. Start with a question such as “share 90 markers in the ratio 2 : 3 : 5”. Ask the pupil to write the labels, mark 10 units as the combined total and calculate nine markers for a unit. The first three shares are 18, 27 and 45. Cover the solution and change the prompt to “the largest group has 45”. The new question should reach the same shares through a different initial division. The pupil must find one unit from the largest share before using the total. This is a simple way to see whether they remember the numbers or can read the new problem.

After a day or two, give a question that swaps the relevant comparison. Three students have tokens in the ratio 2 : 3 : 5. The middle student has nine more than the first. That difference is one unit, so each unit is nine. The shares are 18, 27 and 45 again. A third prompt can ask “how much larger is the last share than the first two together?” The answer is zero because five units match the combined five units. A pupil who notices the equality can explain it before doing the arithmetic.

Look for independent changes in the written work

Ask the child to write one line describing which quantity is known, before they reach for a calculator. If they can say “11 units represent 44 litres” in a problem where 44 litres is the combined total of 3 : 8, the division is grounded. If the question instead states that the second container has 44 litres, the line should read “8 units represent 44 litres”. One unit is then 5.5 litres, the first container holds 16.5 litres and the total is 60.5 litres. The question uses measured quantities, so fractional answers make sense.

After a correction, practise one more example without hints. Treat it as a new question rather than as a repeat of the answer just shown. Work should become easier to follow because labels and units are in the right places. A first answer can contain a wrong calculation and still show progress if it matches the known number to the correct units. The student can then focus on the calculation. A correct final number with no explanation is a good opportunity to ask what they did and practise recording it in a line they can reproduce later.

Decide whether to practise at home, ask school or arrange tuition

Home practice is a useful next step if a pupil can explain their mistake and correct it with one gentle prompt. Keep a record of the first attempt, one correction and one fresh example. If a school worksheet uses terminology the pupil cannot interpret, or asks for a particular written method, show the question to the school teacher. Ask which parts of the method need to be visible for feedback and which representations the class has already learned.

A small-group tutorial can be useful when the same difficulty appears across several lessons despite short, focused attempts. Three pupils can explain their starting decisions, compare reasonable ways of modelling the relationships and try changed examples independently. A tutor should be able to point to evidence of progress, such as matching a given difference to the correct pair of groups without prompting. Bring your child’s actual work and ask how a lesson would address it. Commonwealth families can use the eduKate consultation page to ask about a suitable G1 group, check the current venue and decide whether the 90-minute weekly commitment fits.

Previous chapter · Contents · Next chapter

Carry a clear ratio method into later schoolwork

Ratio is useful in Secondary 1 because it teaches pupils to make a relationship visible before calculating. An assessment might combine that relationship with fractions, decimal conversion or a decision about whether a whole-number result is possible. Use the same opening question each time. What quantity does this number belong to? That question leads to the labels, the number of units and the appropriate check. It works on school tasks and on unfamiliar problems where the wording looks different.

The 2027 SEC G1 school-candidate syllabus list lists Mathematics as K110 for that graduating cohort. The 2027 K110 examination syllabus is a reference for pupils taking that year’s examination. A pupil working on Secondary 1 topics should use their school’s yearly programme now and consult the national syllabus for their own examination year when it applies. Ask the teacher which ratio methods the pupil is expected to use and where current school feedback suggests the next practice should begin.

Previous chapter · Contents