VIEW THIS AS

Auto mode follows the Route Engine until you choose a viewpoint.

YOU ARE HERE

ROUTE CHECK

CONNECTED TO

WHAT NEXT

Use the canonical route for this room, or HELP if you are unsure.

Secondary 1 G2 Mathematics Tuition Cashew | Small Groups for Number Patterns and nth-Term Rules

Secondary 1 G2 Mathematics tuition for Cashew students is available in small groups of up to three at eduKateSG near Sixth Avenue MRT. One useful place to start is number patterns. A child may know that the next row needs four more tiles, yet struggle to say how many tiles are needed for the twentieth row without drawing the first nineteen. We teach students to connect the stage number, the change from one stage to the next and the parts of the pattern that stay fixed. That connection makes an algebraic rule something the child can explain and check.

If your child has brought home a marked patterns question, ask them to show what the letter stands for and what the first entry in the table counts. A mistake in either can make correct arithmetic look like an algebra problem. This guide gives Cashew families worked examples, original practice and a way to choose between short home review, a question for the school teacher and regular feedback in a small group. Use the school’s scope for the next assessment and treat the Singapore–Cambridge Secondary Education Certificate (SEC) as a later milestone.

  • Begin with the stage number. Check whether the starting figure is stage 0 or stage 1. The same set of counts can have different formulas when the labels change.
  • Name what the rule counts. A term might represent tiles in one figure, points after one round or the total after several rounds. Keep the unit with it.
  • Compare consecutive terms. A constant first difference shows the change per step. The first listed value then helps fix the rest of the rule.
  • Connect the rule to the picture or situation. Find the repeated part, the fixed part or the shared pieces that would otherwise be counted twice.
  • Check both directions. Use a stage to find its count, then use a target count to see whether a valid stage could give it.
  • Use an independent attempt to decide what comes next. Take a recent piece of work to a teacher or tutor and show where a prompt was needed.

In this guide

What a pattern question asks a Secondary 1 student to do

A sequence is a list in an order. Each entry has a value and a position. In 8, 13, 18, 23, the value 18 occupies the third position if the list is numbered from 1. A child can see 18, say “add five” and get 23. To find the entry at position 40, however, they need either to keep stepping or to express how the value depends on the position. “Add five” describes the step. An nth-term rule gives the value directly.

Imagine a child writes “5n” for this list. The five is a sensible observation. It names what changes when n increases by one. The trouble shows up when the child substitutes 1. The calculation gives 5, but the first entry is 8. Each entry in the given list is three larger than the corresponding multiple of five. The rule is 5n + 3. Ask the student to keep the useful observation about five, then account for the difference. This correction is more informative than telling the child to replace their answer with a finished rule.

eduKate Mathematics Tuition · 11-second introduction

The G2 Mathematics syllabus places the expression of simple patterns and relationships using the nth term in Secondary 1. It sits alongside interpreting algebraic notation, evaluating expressions and representing situations with letters. The section also includes forming and solving suitable linear equations in one variable. These skills meet naturally in a question that starts by asking for a pattern rule and ends by giving a target value. Your child’s school decides when to teach the material and what it will include in a given assessment.

Move from a familiar method to a general rule

In primary school a child may have extended a number pattern by applying a step again and again. They may also have built a drawing row by row. Keep both methods available. When the fifth stage has only a few pieces, a drawing makes the situation tangible and exposes any counting error. When the fortieth stage would fill a page, a general rule becomes worthwhile. Give the child a reason to use algebra before asking them to push symbols around.

Suppose an activity group begins with five name cards and prints three more each day. If day 1 is the first day after printing begins, its total is eight. One approach writes 8 plus three for every additional day. For day 10 that is 8 + 9 × 3 = 35. Another approach starts with the five original cards and counts ten lots of three. That is 5 + 10 × 3 = 35. Both expressions ask the child to account for all thirty-five cards. The clock starts at a different point in each explanation, and seeing that difference helps the child keep track of the multiplier.

Keep sorting the words a question uses

A term is a value in a sequence. A stage number or position gives its place. The difference is the result of subtracting one term from the next in the order the pattern is presented. The rule describes the relationship. In a question about drawings, the value could count units of length, separate pieces or a total area. Students who write the distinction down early find it easier to see whether an answer of 14 means stage 14, 14 rods or 14 square units.

When a question says “the nth term”, n is a placeholder for one chosen position. An answer expressed using n can work for every valid position in that pattern. When it says “the next term”, the answer is usually one number. When it says “which term is 58?”, the task is to find a position. A student who writes 58 as their final answer to that last instruction may have calculated correctly earlier but missed which quantity was unknown.

Distinguish a model from its continuation

A list such as 4, 7, 10 may be intended to increase by three. If the task gives a diagram with three pieces added at every stage, the intended continuation has evidence. A bare list of three numbers could be continued in many ways. In school exercises with a clear instruction to assume a constant difference, use that assumption. Where the instruction is open, name the pattern you are assuming and carry it through consistently. This is particularly helpful when the pattern has a repeated feature in a picture that explains the rule.

Try asking a child why they expect the change to continue. “The differences are all three so far” is good evidence when the question treats the list as a simple growing pattern. “Every stage attaches another strip of three squares” explains the mechanism. If the next stage in a drawing instead attaches a strip containing four squares, a rule built on constant addition no longer fits. Using the drawing as evidence helps the child see the difference between counting and guessing.

Back to contents

Write the stage number before you write the formula

School pattern questions often show only stage 1, stage 2 and stage 3. Some begin at stage 0 because the context already has a starting quantity before any change happens. Copy the labels precisely. If the first stage shown has a label of 3, the term in that column goes with n = 3. It cannot be treated as the first stage simply because it appears on the left.

Worked example 1. Read the first figure as stage 1

A folded display at stage 1 requires 11 clips. Each new stage needs four additional clips. The counts at stages 1, 2 and 3 are 11, 15 and 19. Students can start at 11 and count how many transitions lie between the first stage and stage n. At stage 2 there is one transition. At stage 3 there are two. At stage n there are n − 1 transitions. The clip total is 11 + 4(n − 1), which simplifies to 4n + 7.

At stage 1, 4n + 7 gives 4 + 7 = 11. At stage 3, it gives 12 + 7 = 19. For stage 18 the total is 72 + 7 = 79 clips. A quick check uses 17 transitions from the first stage, which adds 68 clips to 11. The independent check is valuable because it works from the actual starting count. A child who has accidentally written 4n + 11 will obtain 83 for stage 18 and can use the two checks to locate the error.

Worked example 2. Read the starting quantity as stage 0

A box already holds 12 counters before an activity starts. In each round the student adds seven. Stage 0 means zero rounds have been completed. At stage 0 there are 12 counters, at stage 1 there are 19, and at stage 2 there are 26. The rule is 12 + 7n. Stage 15 gives 12 + 105 = 117 counters. The number 12 in this formula represents the counters in the box at the start.

Now imagine a record sheet calls the initial box “stage 1”, and every later stage is one round on. The same physical state after the first round receives the label stage 2. The rule for this new stage numbering is 12 + 7(n − 1), or 7n + 5. Substituting 2 now gives 19. Both records describe the same quantity of counters. They assign different labels to the physical stages. Compare what both rules give for the same physical state before deciding which rule belongs to a question.

Worked example 3. Start with a stage that is already underway

An incomplete table shows that stage 4 has 29 tokens, stage 5 has 35 and stage 6 has 41. Suppose the pattern is stated to increase by six each stage. Keep the given stage number 4 attached to 29. One rule is 29 + 6(n − 4). Expanding gives 29 + 6n − 24 = 6n + 5. At stage 4 this is 24 + 5 = 29, and at stage 6 it is 36 + 5 = 41.

If the question asks for stage 3, reverse one step from stage 4 to obtain 23. Before extending back to stage 0, check whether stage 0 is defined in this context. An expression can give 5 at n = 0 even when the question begins at stage 1. A statement about the objects at stage 0 needs evidence that such a stage belongs to this activity.

Check how far apart the listed stages are

A table may skip stages. Suppose stage 2 contains 17 counters and stage 5 contains 32, with a constant increase per stage. The counts differ by 15 and the stage numbers differ by three. The increase per step is 15 ÷ 3 = 5. The rule is 5n + 7 because 5 × 2 + 7 = 17. Check stage 5, where the result is 25 + 7 = 32. For a prediction at stage 9, substitute 9 to give 52. The same rule gives 22 and 27 for the omitted stages 3 and 4.

A useful written line is “From stage 2 to stage 5 there are three steps.” It protects against an easy mistake even when a student knows how to subtract. The count values 17 and 32 have a difference of 15. That is the movement across three steps. If your child puts 15 into the coefficient, ask them what the rule would do between stages 2 and 3. They can usually see that the increase would already have jumped all the way to the fifth-stage count.

Back to contents

Use subtraction to find the change

A difference is a signed movement when the terms are presented in an order. Subtract the earlier term from the later term. For 14, 20 and 26, the differences are 20 − 14 and 26 − 20. Both equal 6. For 36, 31 and 26, the differences are 31 − 36 and 26 − 31. Both equal −5. The minus sign tells the student that each stage has five fewer, so their formula must decrease as the stage number increases.

In a first attempt your child might subtract the smaller value from the larger every time. On a rising list that habit can produce the right answer without exposing the flaw. Use a falling list as the next practice task. Ask your child to compare the direction from one entry to the next before carrying out the subtraction. An arrow labelled “−5 each time” makes the direction clear. Ask for at least two adjacent differences if three terms are available. A single pair of terms always supplies a difference, so it cannot show whether more differences agree.

Worked example 4. Account for a decreasing supply

A cupboard contains 74 unused sketchbooks before a programme begins. Each session uses exactly eight. Let n be the number of completed sessions. The rule is 74 − 8n. After three sessions 50 sketchbooks remain, and after eight sessions 10 remain. The largest number of complete sessions the original stock can supply is nine because 74 − 8 × 9 = 2. A tenth full session would require six more sketchbooks.

This example has a boundary. Substituting 10 gives −6, which describes the shortfall if ten sessions are planned. It would be impossible for the cupboard to contain a negative number of physical sketchbooks. Use the formula to explain the demand and then interpret what the number means in the setting. If the question had explicitly stated that replenishment occurs after every third session, this simple rule would need changing.

Worked example 5. Read a mixed-sign number sequence

In an invented score exercise the first four entries are 9, 5, 1 and −3. Starting at the first value and subtracting four at each step gives 9 − 4(n − 1), or 13 − 4n. The eighth term is 13 − 32 = −19. Check that the fourth and fifth values are −3 and −7, which differ by −4. Here negative scores are allowed by the exercise, so the context supports the negative value.

Give the child two tables with the same sequence and ask them to explain which figures could describe a score and which would make sense as the number of physical objects left in a basket. The algebra tells us what the calculation does. The setting tells us what values we can report as an answer. This matters whenever a question asks for the earliest possible stage, a maximum number of rows or a forecast beyond the starting information.

Use a quick check based on direction and size

If a stage number is larger and the pattern is increasing, the output should be larger than earlier outputs. If a stage number rises by ten in a pattern with a constant drop of two, the output should fall by twenty. This comparison can catch a sign error without doing all the original arithmetic. Suppose a student calculates stages 8 and 18 as 31 and 11. The two positions differ by ten and the outputs differ by −20. That is consistent with a change of −2 per stage. One more substitution checks whether the starting amount has also been handled correctly.

A direction check tests the change. A known stage tests the fixed part. Both 3n + 1 and 3n + 10 are increasing. They both grow by three every step, but the counts are nine apart throughout. Check at least one known term to test the fixed part. Then choose another known term far enough from the initial stage that a mistake with the change would be apparent.

Back to contents

Let a diagram explain the fixed part of the rule

A student can read three totals from a drawing and discover an nth-term rule by subtraction. They get more from the task if they can also point to the pieces represented by each part of the rule. Consider a repeating display with one permanent card at each end and three cards for each panel placed between them. For n panels the repeated contribution is 3n and the end cards contribute two. The stage 1 total is five, which explains why 3n by itself falls short. The difference from one stage to the next is three because only the number of panels changes. The beginning and end stay where they are as the display grows.

Worked example 6. Count shared edges once

A builder uses short identical rods to make a row of square frames. Each square is one rod wide and one rod high. Adjacent squares use the same rod for the edge between them. A single square needs four rods. Two side by side need seven. Three need ten. Seen as a growing chain, the first square supplies four rods and every new square shares one side, adding three rods. The rule is 4 + 3(n − 1) = 3n + 1.

Count the same rods without building the chain in order. The top uses n rods and the bottom uses n rods. The vertical rods consist of one at each end and n − 1 inside, totalling n + 1. The total is n + n + (n + 1) = 3n + 1. This second count shows why the one in the simplified rule is present. It also gives a way to audit a diagram where a student has made several crossings or pencil corrections. Mark the top, the bottom and the upright rods one group at a time.

Ask what would happen if the squares were separate. Now each needs four individual rods, so the total is 4n. At n = 1 both rules give 4. At n = 2 the shared arrangement uses seven rods and the separate arrangement uses eight. This is a useful example of why one matching value gives weak evidence. Both arrangements agree at stage 1 and diverge as soon as there is an edge to share.

Worked example 7. Use a row of panels to read an exposed boundary

A sign is made by placing n identical square panels side by side without gaps. Each side of one panel is 5 cm. The outside boundary is a rectangle 5n cm long and 5 cm wide. Its perimeter is 2 × 5n + 2 × 5 = 10n + 10 cm. Each new panel adds 5 cm to the top and 5 cm to the bottom, so the boundary grows by 10 cm at every step. The end widths contribute a fixed 10 cm.

At six panels the perimeter is 70 cm. A direct check uses a 30 cm by 5 cm rectangle, giving two lengths of 30 cm and two widths of 5 cm. If the question instead asks for the area of the same sign, count six squares of 25 cm² each to get 150 cm². For n panels the area is 25n cm². The pattern and the units tell the parent whether the child was tracing the outside or counting the surfaces covered. A result of 70 cm² signals that the calculation and the quantity may have been mixed up.

Worked example 8. Show how an alternative rule names the same pieces

A classroom puzzle has a centre tile plus four arms. At stage n each arm extends n tiles from the centre. The total is 4n + 1 because the four arm segments contribute n each and the middle contributes one. A child looks at the same diagram as a horizontal row of 2n + 1 tiles crossing a vertical row of 2n + 1 tiles. Adding both rows counts the centre twice. Their rule is (2n + 1) + (2n + 1) − 1. It simplifies to 4n + 1.

When a child proposes an alternative count, ask them to sketch a line around each group and point out any overlap or gap. This gives the child something concrete to show before simplifying. If two expressions agree at a few stages, the next question is whether they describe the same pieces at a general stage. Algebra can demonstrate that equivalence when both counts are valid. It can also reveal a missing term when the drawings appear to agree for the first stage.

How to explain a rule in one complete sentence

Try this structure in a written answer. “Each new panel adds three clips, and the two end clips are present at every stage, so n panels need 3n + 2 clips.” The explanation names both the rate of change and the fixed part. A reader can tell what each symbol means without asking to see the teacher’s method. If the rule came from the first term, a good sentence is “Stage 1 uses 11 clips, and reaching stage n takes n − 1 additions of four clips.” That sentence justifies 11 + 4(n − 1) before any simplification.

There are cases where the fixed number in a simplified formula has no direct physical interpretation. Consider 6n − 2 obtained by starting at four and adding six each stage after stage 1. In some diagrams the minus two may represent a pair of shared pieces. In other situations there is no actual stage 0 and no negative supply of pieces. In that case, explain the rule in its starting-value form first. Treat the −2 as the adjustment needed after changing the expression into an equivalent one.

Back to contents

Use the rule backwards and interpret the result

In one kind of question the stage is given and the count is unknown. In another, the target count is given and the stage is unknown. This second kind invites an equation. If a pattern has rule 5n + 8 and the student wants a value of 73, the equation is 5n + 8 = 73. Subtract eight from both sides to get 5n = 65. Divide both sides by five to get n = 13. Check by substituting 13 into the expression and looking at the conditions. In a pattern of whole stages starting at 1, stage 13 is a valid position.

Try a target of 72. The same steps give 5n = 64 and n = 12.8. If n counts complete figures, no stage has exactly 72 pieces. A useful answer includes the reason. Stage 12 has 68 and stage 13 has 73. This gives a further interpretation when the question asks for the first stage with at least 72 pieces. In that case the answer is stage 13. If it asks for the biggest stage that can be built with 72 pieces, the answer is stage 12. The same fractional number sits between the same two stages in all three cases. The wording determines which conclusion follows.

Worked example 9. Find a repeatable boundary check

A stage design needs 9 + 4n fasteners, and n is a positive whole number. A teacher has 90 fasteners and wants to know how large a design can be made. The equation 9 + 4n = 90 would require n = 81 ÷ 4 = 20.25. Use the two neighbouring stages. Stage 20 requires 89 fasteners and leaves one spare. Stage 21 requires 93, which is three more than the supply. Stage 20 is the largest stage possible with those fasteners.

If a child writes “round down because there is a fraction”, ask them to explain which stage they are testing and what would go wrong at the other stage. For a stock limit the answer must use at most the amount available. For a requirement to reach a target, the answer must give at least the amount required. In a decreasing pattern the same checks can save a mistake because the direction of change is reversed. The student can use a short table of neighbouring stages instead of relying on a remembered rounding instruction.

Worked example 10. Compare two patterns when they meet

Two displays grow by different amounts. Display A needs 4n + 18 cards and Display B needs 7n + 3 cards, with n beginning at 1 for each. To find when they need the same number, set 4n + 18 = 7n + 3. Subtract 4n from both sides to get 18 = 3n + 3. Subtract three from both sides and divide by three, giving n = 5. Each display needs 38 cards at stage 5.

At stage 4, A needs 34 and B needs 31. At stage 6, A needs 42 and B needs 45. The gap changes by three each time because B adds three more cards per stage than A. A student can use that comparison to check the equation and explain why B takes over after the matching stage. This is also a useful chance to distinguish the stage at which the totals match from the value of the shared total. A complete response reports stage 5 and 38 cards if the question asks for both.

A short test for a plausible but faulty rule

Say a student sees 7, 12, 17 and writes n + 6. It gives 7 at stage 1 but only 8 at stage 2. The change in the rule is one. The actual list changes by five. If they write 5n + 7, the rule now changes by five but grows from an incorrect first value of 12 at stage 1. A correct formula needs both properties. Give your child a chance to point to the right part of each attempt. The error looks different once they can identify whether it arose from the step size or the stage numbering.

A useful final habit is to decide what counts as a valid input. Stage numbers are normally whole numbers, and the problem may begin at 0 or 1 or display only a restricted range. A forecast may require an activity to continue in the same way. In a seating plan, a room width may also limit the number of sections that can fit. Have the child write the assumption beside the model if it affects what they can report.

Back to contents

Watch what happens when the same step does not fit

A rule obtained by taking a constant first difference is appropriate for patterns that do have a constant point-to-point change. Try the list 3, 6, 12, 24. The first differences are 3, 6 and 12. Sticking with the first difference of three gives the wrong third term. In this example the next term is 48 if the instruction is to keep doubling. A Secondary 1 student can recognise and describe this repeating multiplication without needing to learn everything about more advanced sequence formulas. The point is to choose a rule that actually fits the change.

A picture can give stronger information than the list alone. If a staircase adds rows that contain one, then two, then three and then four squares, the total grows by a different amount at every stage. The total after four stages is 1 + 2 + 3 + 4 = 10. The next total would be 15 if the pattern adds a row of five squares. Ask the child to predict the next move and show it in the picture. A diagram can explain the changing difference even when the class is only beginning to express constant-step rules algebraically.

A useful home exercise is to place two lists side by side. One list might be 5, 9, 13, 17. The other might be 5, 9, 15, 23. A parent can ask whether adding four will continue to work in both and whether the first two values alone were enough to be sure. In the first list, the differences remain four. In the second, they become four, six and eight. The student can say how the examples differ without having to produce an advanced nth-term expression for the second list.

Use a table as evidence, one row at a time

If a sequence table has a missing value or an extra column, first match each value to its stage. Then use a second line to compare. For instance, stage 1 has seven beads and stage 3 has 17. The totals differ by ten across two steps. A constant-step model therefore gives five beads per step and a value of 12 at stage 2. If the table already states that stage 2 has 13 beads, the constant-step model is contradicted. If a question says the value at stage 2 was copied incorrectly, there is now a clear reason to suggest 12 as the correction.

When students start a table themselves, have them label the two rows “Stage number” and “Number of beads”. Put units in the second row label if the values measure length or money. A student who writes only the two sets of numbers often forgets what to do when the question swaps the input and output. A clear label gives them something to check before starting algebra.

Back to contents

Independent practice with worked answers

Cover the answers and start with questions 1 to 6. For each, show the stage number and one piece of evidence that supports your method. In the second half of the set, record which tasks you could start without a hint. Read the answer as a comparison with your working. A different valid expression is fine when it counts the same thing for every allowed stage.

  1. A list with a constant difference begins 14, 19, 24, 29. It starts at stage 1. Find the nth-term rule and the value at stage 12.
  2. A display begins at stage 0 with 17 cards. Each stage from then on adds six cards. Find a rule and the number of cards at stage 13.
  3. Stage 4 has 35 beads and stage 7 has 56 beads. The change is constant. Find the count at stage 5 and a rule for stage n.
  4. Find an nth-term rule for 27, 23, 19, 15, assuming the constant step continues and the list starts at stage 1. Find the tenth term if negative values are allowed.
  5. A student says the nth term of 12, 16, 20, 24 is 4n + 12. Show the first stage at which it fails and repair the answer.
  6. A row of hexagonal frames is built from equal rods. Each new frame shares exactly one whole edge with the previous frame and shares no edge with any other frames. One frame uses six rods. How many rods are needed for n frames, and how many does stage 14 need?
  7. A display is a plus sign built around one middle piece, with two pieces per arm at stage 1 and two additional pieces on each of the four arms at every later stage. Find its nth-term rule and use it to find the count at stage 9.
  8. A growing rectangle has a width of 4 cm and is made by attaching panels that each measure 4 cm by 3 cm along the 4 cm edges. Find a perimeter rule and an area rule for n panels. Find both values at stage 7.
  9. A bag contains 97 tokens before any rounds are played. Each complete round removes exactly nine tokens. What is the greatest number of rounds that can be completed with this supply? How many tokens remain then?
  10. A kit needs 6n + 5 parts, where n is a positive whole number. Does any kit stage need exactly 90 parts? Find the smallest stage that needs at least 90 parts.
  11. Group A counts 3n + 19 entries and Group B counts 5n + 7 entries for stage n. Find the stage at which their totals agree, and determine the difference at the next stage.
  12. Starting from stage 1, a strip’s values are 8, 16, 32 and 64. Explain what goes wrong if a student treats eight as the constant difference. Find the fifth value if the strip continues to double.
  13. A table says stage 2 has 11 pieces, stage 5 has 26 pieces and stage 8 has 42 pieces. Can the whole table describe a constant-step pattern? If only stage 8 is wrong, what value belongs there?
  14. At stage 0 a model uses 20 pieces. It adds six per stage. A second record starts its numbering at 1 on the very same first model. Find a rule using the second numbering and check it at the first two stages.

Answers with reasons

  1. The first difference is five. Using stage 1 as the reference gives 14 + 5(n − 1), or 5n + 9. Stage 12 has 60 + 9 = 69. To check it another way, 11 steps of five carry 14 to 69.
  2. The rule is 17 + 6n. The starting 17 goes with n = 0, so stage 13 has 17 + 78 = 95 cards. Check stage 1 gives 23, exactly six more than 17.
  3. A difference of 21 beads over three stages gives seven extra beads per stage. Stage 5 has 42 beads. The rule 35 + 7(n − 4) simplifies to 7n + 7. Substituting 7 gives 56 as required.
  4. Each term is four fewer. The rule 27 − 4(n − 1) is 31 − 4n. The tenth term is 31 − 40 = −9. Stage 4 gives 15, matching the list. Here the question allows a negative result.
  5. At stage 1 the suggested rule gives 16, though the first term is 12. The coefficient four already gives the right change. Use 12 + 4(n − 1), or 4n + 8. At stage 2 it gives 16.
  6. The first frame uses six rods and each later one adds five. The rule is 6 + 5(n − 1) = 5n + 1. Stage 14 needs 71 rods. An independent check starts at six and adds 13 lots of five.
  7. At stage n there are 2n pieces on each of four arms and one in the middle. The count is 8n + 1. At stage 9 that is 73 pieces. A second way to check is to add eight stages’ worth of eight pieces to the first stage’s nine pieces.
  8. The rectangle is 3n cm long and 4 cm wide. Its perimeter is 6n + 8 cm and its area is 12n cm². At stage 7 these give 50 cm and 84 cm². The units distinguish the boundary from the covered surface.
  9. Ten rounds use 90 tokens and leave seven. Eleven rounds would use 99 tokens, which is two more than the supply. Ten is the greatest number of complete rounds.
  10. Solving 6n + 5 = 90 gives n = 85 ÷ 6, which lies between 14 and 15. Neither a fractional stage nor a rounded value gives exactly 90. Stage 14 needs 89 parts, and stage 15 needs 95. Stage 15 is the first that needs at least 90.
  11. Solving 3n + 19 = 5n + 7 gives 12 = 2n and n = 6. Each total is 37. Stage 7 gives 40 for A and 42 for B, so B leads by two. The gap grows by two per stage because five exceeds three by two.
  12. Adding eight to 16 would give 24 as the third entry, which conflicts with 32. Doubling 64 gives 128 at stage 5. The repeated operation relates each value to the next, without a fixed additive change.
  13. Between stages 2 and 5, the gain of 15 across three steps is five per step. Three more steps add 15, so a constant-step pattern would have 41 at stage 8. The recorded 42 conflicts with that pattern. If that is the only wrong table entry, replace it with 41.
  14. With stage 1 at the initial model, the rule is 20 + 6(n − 1), or 6n + 14. Stage 1 gives 20 and stage 2 gives 26. They are the same physical stages that the original record called stages 0 and 1.

Choose one reason to revisit

If questions 1, 2 and 5 were tricky, repeat a short example with one change to the labelling. A good follow-up uses the same counts starting with stage 0 and then starts again with stage 1. If questions 3 and 13 were harder, practise dividing the overall change by the difference in position. Keep the two stage numbers beside the two counts. A student who explains that stage 5 is three steps away from stage 2 is now less likely to treat the whole change as a single jump.

If questions 6 to 8 caused mistakes, sketch one more stage and count in labelled groups. Ask your child whether the earlier count included an edge twice or missed a fixed part. For questions 9 and 10, look at the neighbouring stages and have your child put their conclusion in a full sentence. The sentence should name the requested condition. “Nine rounds are possible” sounds complete until you ask whether ten could also be possible. “Ten is the largest number because eleven would require 99 tokens” answers the question.

Back to contents

Plan for the next school assessment and the later SEC

Take the teacher’s topic coverage or revision note as the plan for an upcoming school task. A child who has recently learnt expressions may benefit from a pattern question that ends with a rule and one substitution. If the class has also used linear equations, add a question that works backwards from a target. New sections of the wider national syllabus can wait until the course reaches them. The Secondary 1 Mathematics syllabus guide gives a broader view of the year alongside the school’s own materials.

Try a three-session routine over one week. For the first session, return to one worked mistake and have the child explain what the number or letter means. For the second, use a fresh task with changed labels or a new diagram. For the third, choose a problem that uses the same relationship in a different setting, such as moving from counting rods to planning rows of chairs. Ask your child to label the quantities before they see a hint. You can then see whether the method transfers beyond an example that looks familiar.

Full Subject-Based Banding makes it possible for different subjects in a student’s timetable to be offered at different levels. Check the Mathematics allocation itself when making a study plan. A Posting Group helps with school admission and initial subject levels. The school can confirm the child’s actual subject combination and advise if a change is under consideration. The Full Subject-Based Banding overview illustrates this flexibility.

The SEC begins in 2027 for the graduating cohort. SEAB’s 2027 G2 syllabus listing identifies Mathematics as K210 for that sitting. The published examination syllabus describes the national assessment across the course. A student entering Secondary 1 in 2027 would ordinarily reach Secondary 4 in 2030 with one year of progression per level. Check the SEC school-candidate syllabus directory for the actual examination year once published.

Back to contents

Decide whether small-group support fits your child

A workable decision starts with a sample. Bring one independent attempt, one marked task and an exercise where your child needed a hint. The comparison shows whether a student tends to copy the stage count incorrectly, use a wrong sign, find a sound rule from a table but struggle with diagrams, or stop after an arithmetic result without interpreting it. If most work is sound and the gap is narrow, a few short reviews at home or a conversation with the teacher may help. Regular tutorial feedback may be useful if the same issue reappears whenever the setting changes.

A parent can ask how a tutor would handle the work in front of them. A useful answer identifies a move the child will try. The tutor might ask them to draw stage 3, mark the shared edges and predict stage 4, then give a small variation for an independent attempt. In a group of up to three, students can compare different valid counts and then show their own written reasoning. Ask how the tutor will align the starting examples with the school’s current topic and how you can tell whether the child can repeat the process independently.

For Cashew families, the teaching location is near Sixth Avenue MRT at 8 Fourth Avenue, Singapore 268674. Plan the journey around the child’s actual school and activity timetable, including travel from the station and time to eat or rest. Ask about a suitable G2 group and lesson time before committing to a weekly journey. Cashew Secondary Mathematics tuition details.

Back to contents

Frequently asked questions

Why can my child continue a pattern yet struggle to write the nth term?

Continuing a pattern uses the previous value and one step. An nth-term rule relates a value directly to its position. Start with a small table and highlight where the first term sits. Have the child describe how many changes take them from stage 1 to stage n. Then write the same explanation with letters.

Does an nth-term rule always start with stage 1?

Read the question’s labels. A sequence of figures often begins at stage 1. A round-based model can start at 0 when the starting quantity exists before any change. Use the stage meaning the problem gives and test the rule against a named stage with a known count.

What if my child writes a different expression from the answer key?

Ask what each part represents and compare the expressions by simplifying or expanding where appropriate. For example, 4 + 3(n − 1) and 3n + 1 are equivalent. A correct expression with an explanation of the counted pieces may already show understanding. Follow any instruction about the required form of the final answer.

How can we tell if a correction has worked?

Make a small change to the original problem and leave the child to choose the first step. Use an unfamiliar diagram, change the starting stage, or ask for a target count instead of a stage number. A complete independent explanation several days later gives a better picture than a copied answer on the day.

What should I bring for a first tuition enquiry?

Bring the school’s Mathematics level, the current chapter and a marked question showing the student’s attempts. One correct question can be helpful too, because it shows the method they already use well. Give the student a chance to tell the tutor where the question became difficult. Arrange a parent–student consultation.