Secondary 1 G3 Mathematics tuition for Pine Grove students is available by arrangement in groups of up to three at eduKateSG’s Bukit Timah teaching venue, 8 Fourth Avenue near Sixth Avenue MRT. This guide helps students use ratios to compare quantities, divide a total and follow changes in a word problem. Families travelling from Pine Grove can use the worked examples to decide what their child can practise independently and where a teacher or tutor could help.
Start with a question your child has already attempted. Ask what the first number in the ratio counts, what the second counts and whether the question gives one part, the difference between two parts or the total. Those decisions tell you more than a page of repeated calculations. Secondary 1 schoolwork builds habits such as labelling quantities, choosing a method and checking an answer in context. The later Singapore–Cambridge Secondary Education Certificate (SEC) calls for those habits in wider settings.
- Read the order of the two quantities before writing the ratio.
- Convert quantities to the same unit when comparing measurements of the same kind.
- Decide whether the question refers to one part, a difference or the whole.
- Scale both terms by the same factor to write an equivalent ratio.
- Label the parts before and after a change and check which quantity stays fixed.
- Use a fresh unaided attempt to decide whether home practice, school feedback or small-group support would help.
In this guide
- Find out what the numbers compare
- Simplify ratios with fractions, decimals and mixed units
- Choose a unit by asking what the problem gives you
- Track a transfer by watching what stays fixed
- Keep the mixture’s total and components in view
- Diagnose a ratio error in three separate checks
- Try new questions and check the answers later
- Decide what sort of support fits
- Curriculum and related guides
Find out what the numbers compare
At a school activity, 12 students are designing posters and 18 are building models. The ratio of poster designers to model builders is 12:18, or 2:3. In the reverse order the ratio is 3:2. If each student has one assignment, the ratio of poster designers to the whole group is 12:30, or 2:5. The three answers come from the same record. Each answers a differently worded question. Ask your child to write the names in the requested order before placing numbers underneath. They can look back at those names when deciding whether they have counted all the relevant students.
One small detail matters in that example. The two groups make up the whole only because every student has one assignment and those are the only assignments in the group. Suppose five other students are preparing a presentation. The poster-to-model ratio is still 2:3, but there are now 35 students in the whole group. Poster designers account for 12/35 of the students. A child who writes 2/5 has remembered the earlier relationship and applied it to a larger group without updating the total. Ask which students the word “whole” now includes.
A ratio can compare a part with a whole even when the simplest ratio looks very similar to a part-to-part comparison. If a tray contains five green pieces and seven white pieces, green to white is 5:7. Green to all pieces is 5:12, and the fraction of pieces that are green is 5/12. A tray with the same two colours and green equal to 5/7 of all pieces would contain five green pieces per two white pieces. Draw seven marks for the whole and colour five mentally. There are two left. The meaning of the denominator changes the picture.
Write these statements side by side with your child. “There are two orange cards for every five blue cards.” “Two of every five cards are orange.” The first describes a group of seven cards with two orange and five blue if those are the only colours. The second describes a group of five cards with two orange and three others. A student who treats the two statements as interchangeable may still simplify perfectly when given a numerical ratio. The correction belongs in reading and labelling. One quick drawing can settle which quantity the five counts. Then use another pair of statements with different numbers so the child has to make the same decision again.
Keep the direction in a sentence
Suppose two ribbons have lengths 36 cm and 54 cm. The shorter-to-longer ratio is 2:3. The shorter ribbon is two-thirds as long as the longer one, and the longer is three-halves as long as the shorter one. Both sentences are valid. A child who says “the longer one is two-thirds of the shorter one” can use a rough length check before touching the calculation. Two-thirds of a positive length is smaller than the length itself. The result would contradict the claim that the ribbon is longer.
When a question says “A is three times B”, try writing A = 3B or drawing three equal units for A and one for B. The ratio A:B is 3:1. In a pair totalling 40, each unit is 10, so the two values are 30 and 10. If the sentence changes to “A is three more than B”, the same total gives 21.5 and 18.5. The first sentence uses a multiplication relationship and the second gives an additive difference. Try the two versions with masses or lengths, where half units make sense. In a problem about counting objects, a fractional count would invite a further check of the assumptions or the data.
A child can also check a comparison by imagining a reference of one unit. If the mass of one block is three-quarters of another, call the second mass one. The first is then three-quarters and should be smaller. If a note says the first-to-second ratio is 4:3, the note would make the first larger. This quick test helps pupils who can reverse an arithmetic operation but lose track of which quantity serves as the starting point. Its value is greatest when a passage changes the order of the names halfway through.
Place this topic in the school year
The Secondary Mathematics syllabus includes ratios involving rational numbers, simplifying ratios and solving ratio problems in Secondary One G3. Number operations, percentages, rates and algebra appear alongside this work. The school’s own teaching sequence and assessment notice say what the class is studying this week and what students are expected to show. Formal direct and inverse proportion are later topics in the published G3 sequence. A pupil can already reason about multiplying each amount in a given recipe by the same number, using equivalent ratios and the quantities specified in the question.
Under Full Subject-Based Banding, the Posting Group helps with admission and indicates starting levels for most subjects. The G3 designation in this guide refers to the level at which a student takes Mathematics. Read the individual subject entry or offer from the school when deciding which materials match the child’s class. A child may take different subjects at different levels. The school can explain any options and how it reviews placement. Full Subject-Based Banding subject-level guidance
The national examination comes later. The published 2027 SEC G3 Mathematics syllabus lists K310 for the 2027 examination cohort. It helps families see the eventual role of choosing and explaining mathematics in context. Consult the published syllabus for the student’s own examination year when the time comes. Secondary 1 preparation begins with the school’s present work and an answer another person can read from start to finish.
Simplify ratios with fractions, decimals and mixed units
Draw two lengths of 1.5 m and 90 cm. To compare their sizes, express them in a common unit. In centimetres they are 150 and 90, giving 150:90 = 5:3. In metres they are 1.5 and 0.9, and multiplying both terms by ten first gives 15:9 = 5:3. The labels tell you why these two routes agree. The ratio of the lengths stays the same when both undergo the same conversion. Dividing 1.5 by 90 before converting mixes metres and centimetres and would suggest the first is much shorter, even though 1.5 m is longer than 90 cm.
When each term is a fraction, choose a common scale that clears the denominators. For 3/4:5/6, multiplying both terms by 12 gives 9:10. The first quantity is slightly smaller because 3/4 is 9/12 and 5/6 is 10/12. You can teach this with strips of paper. Imagine one strip cut into four and shade three pieces. Imagine an equal strip cut into six and shade five. If both are now ruled into twelfths, nine and ten pieces are shaded. The two counts use the same-sized pieces. Multiplying by 12 symbolically does exactly that work.
A useful near miss is 2/3:3/5. A student might compare the numerators and say 2:3, or compare the denominators and say 3:5. Both approaches discard part of each value. Multiply both terms by 15 to obtain 10:9. There is a quick independent check. Two-thirds is a little greater than three-fifths, so the first term should end up larger. If a result makes it smaller, look back at the denominators. Fractions with different denominators can feel awkward even after a student can simplify a ratio of whole numbers. Use separate practice for the move that needs it.
Suppose the ratio is 0.36:0.48. Multiplying both terms by 100 gives 36:48, and dividing both by 12 gives 3:4. There are other sound routes. You can think of both decimals as hundredths or notice that they are three and four lots of 0.12. A student who multiplies 0.36 by 100 and 0.48 by 10 produces 36:4.8. That operation changes one side of the comparison ten times as much as the other. Write the scale factor above both terms on the same line. This makes the error visible to the student, and they can remove the labels when equivalence becomes familiar.
When a ratio combines a mixed number and a decimal, convert them using terms your child can connect. Compare a length of 1 1/5 m with a length of 0.75 m. The first is 1.2 m, so the ratio is 120:75 = 8:5. In centimetres, those same numbers are actual lengths. Saying “one hundred twenty centimetres to seventy-five centimetres” lets a student test whether the direction is plausible. If the original asks for the shorter-to-longer ratio, write 75:120 = 5:8. The arithmetic and the wording are separate checks.
Know when a unit stays attached
A comparison of 500 mL with 2 L compares the same kind of quantity. Express both amounts in litres or both in millilitres, and find the ratio 1:4. A label such as litres per minute answers another kind of question. It compares volume with time and describes a rate. If a tap fills 2 L in 50 seconds at a steady rate, it gives 40 mL per second, or 2.4 L per minute. Here naming the units is essential to interpreting the answer. A sentence saying “the ratio is 2:50” leaves the reader to reconstruct which number measures water and which measures time.
Try a second contrast using fictional product packs. One pack contains 3/4 kg and costs $6. A different pack contains 1.2 kg and costs $9. The ratio of their masses is 0.75:1.2 = 5:8. The cost per kilogram is $8 for the first and $7.50 for the second. These questions use the same facts to do different jobs. Ask which answer helps when the shopper needs to know how much heavier one pack is compared with the other, and which helps when comparing prices for the same amount. A student should be able to name the quantity they chose to compare before getting a calculator.
Check equivalent ratios without restarting the question
For the positive sizes used in these exercises, two ratios are equal when both terms of one ratio have been multiplied by the same positive scale factor to produce the other. Compare 15:21 and 25:35. The first reduces to 5:7 by dividing by three. The second also reduces to 5:7, using division by five. A pupil who spots one common form can use it to compare many ratios without plotting them or finding decimals. The simplification is a way to see the shared structure.
An equivalent check is to compare cross-products when both second terms are positive. For 15/21 and 25/35, the products 15 × 35 and 25 × 21 are both 525. This check comes from multiplying the fractions by the same common denominator. Use it when a student understands why the equation stays true. With a short ratio such as 15:21 the simplest form may still be more informative because it can answer a follow-up share question. Ask the student to pick a method that leaves them with useful information for the next line.
Choose a unit by asking what the problem gives you
Three students share 126 blank name badges in the ratio 2:3:4. Write their names in order and draw two, three and four equal marks. There are nine marks in all. Each represents 126 ÷ 9 = 14 badges. The parts are 28, 42 and 56. Check that the parts add to 126 and that the last student got twice the first student’s share. Ask why we divided by nine. A child who says “nine is all the equal units in this sharing” knows what the denominator means. A child who says “you always add the ratio numbers” may need a problem that gives the difference or one share.
Try the same ratio with only the smallest share given. If the first student got 28 badges, two units represent 28, so one unit is 14. The third student gets four of those units, giving 56. The total can be found afterwards. Now give only the difference between the largest and smallest share as 28. Their drawings differ by two units. Two units still represent 28, although this time the information came from a comparison between shares. Each exercise uses identical ratio numbers and produces the same allocation. The division follows from a different sentence in each problem.
The difference can happen to use the same number of units as one named part. For instance, a 3:6 split has a difference of three units, equal to the smaller share. That accident can hide the mistake of using the smaller share whenever the difference is given. A useful variation changes the ratio to 3:7. The difference is now four units. Ask your child to mark the extra section of the longer bar. If the given difference is 28, one unit is seven and the shares are 21 and 49. The drawing makes the arithmetic follow the relationship.
Use a fractional share when that is the quickest route
The nine units in 2:3:4 imply that the three shares are 2/9, 3/9 and 4/9 of the total. A student can multiply 126 by these fractions instead of drawing nine marks. This works because each equal unit accounts for one-ninth of the total. Show both routes on one question so the child knows what the fraction compresses. On a short test question, writing “first share = 2/9 × 126” gives the reader enough information when the ratio and total are already clear.
Consider a comparison in which the numerical ratio cannot be made into whole shares under the stated total. A student is asked to divide 46 pencils in the exact ratio 2:3. A whole unit would need to hold 46 ÷ 5 = 9.2 pencils. The proposed shares would be 18.4 and 27.6. Rounding gives 18 and 28, which add to 46 but have ratio 9:14. That might be acceptable under an approximate practical rule if someone has explicitly allowed rounding. An exact ratio of 2:3 calls for a compatible total. Ask your child to distinguish the conditions “give each group close to its target share” and “divide all objects in this exact ratio.”
The same figures work differently when the objects can be divided. If the total is 46 litres of a liquid and the measurement lets us use tenths of a litre, 18.4 L and 27.6 L are valid. Check by multiplying each by ten to get 184:276, then simplifying to 2:3. The result is assessed in context. Whole numbers have priority in a bead-counting problem because a bead is counted as an object. The stated precision has priority when measuring a length or volume.
Connect two comparisons before using a total
A workshop puts out brushes, clips and trays. The ratio of brushes to clips is 3:4. The ratio of clips to trays is 2:5. Find the full ratio. The role of clips is shared by both statements. Write the second ratio at double scale, as 4:10. The combined comparison is now brushes:clips:trays = 3:4:10. If there are 102 objects, all seventeen units represent 102. A unit is six. There are 18 brushes, 24 clips and 60 trays. Checking the original comparisons gives 18:24 = 3:4 and 24:60 = 2:5. Both statements survive the join.
Try a case where neither clips term already divides the other. A table holds erasers, pencils and pens. Erasers:pencils is 4:9 and pencils:pens is 6:5. Choose the common value 18 for pencils in the scaled comparisons. Double 4:9 to get 8:18 and triple 6:5 to get 18:15. The connected ratio is 8:18:15. The middle value was chosen for convenience. Scaling to 36 would also work, though the combined numbers would be larger and could be simplified afterwards. A pupil who writes 4:9:5 should go back to the sentence giving pencil-to-pen ratio and test it.
Some questions also provide information about only two quantities out of three. If the combined ratio is 8:18:15 and the erasers and pens together total 115, it is 8 + 15 = 23 units that equal 115. A unit represents five items. The pencils number 90. The fact that all three ratio terms are available can tempt a student to add all three before dividing. One line naming the given subtotal prevents that error. Ask the child to point at the two sets that the question actually counts.
Track a transfer by watching what stays fixed
In a display, the ratio of upright cards to flat cards is 5:3. There are 96 cards altogether. Move eight from upright to flat. At the start there are 60 upright and 36 flat, using 96 ÷ 8 = 12 cards per unit. After the change there are 52 upright and 44 flat, giving a ratio of 13:11. The total is still 96. A student who subtracts eight from the upright count and also subtracts eight from the flat count has treated the cards as if they disappeared from both places. A two-row record makes the transfer visible.
The numbers 5 and 3 in the first ratio are unit counts. The eight moved are actual cards. The expression 5 − 8 is therefore unsuitable. Work out the actual counts first when the total gives them immediately. If the actual counts are unknown, name one initial unit with a letter. Then record the amount that moves as an addition in one row and a subtraction in the other. A child can discover this by showing what the words mean before trying to remember which equation format a teacher used.
Try a reverse transfer. The original ratio of books on the top shelf to books on the bottom shelf is 7:5. After moving six books from the top shelf to the bottom shelf, both shelves have the same number. Two initial units represent the original difference. Moving six reduces one side by six and increases the other by six, closing a difference of twelve books. Each initial unit is therefore six. The original counts were 42 and 30, and after moving the books both shelves hold 36. A child who says that the original difference was six can test their thought with two shelves beginning with 13 and 7. Moving six creates 7 and 13. The discrepancy switches direction and keeps the same size. Moving three would make them equal.
Treat an addition from outside differently from a transfer
The ratio of square to round tokens in a box is 4:7. Eight new square tokens arrive. The resulting ratio is 2:3. The round count stays fixed. Match the round terms in the two comparisons. In the first, scaling 4:7 by three gives 12:21. In the second, scaling 2:3 by seven gives 14:21. The square count increases by two equal matched units, which correspond to eight tokens. Each matched unit represents four tokens. The original counts were 48 squares and 84 rounds, and the final counts are 56 and 84. Simplify 56:84 to get 2:3.
This route works because a common scale of 21 is applied to the unchanged category. In a transfer both category counts usually change, so matching one category would misrepresent what happened. One clean question for the start of a lesson is “What do we know stayed the same?” If the answer is “the total,” label the whole. If the answer is “the round count,” place a mark beside that count before interpreting either ratio. If nothing stays fixed, look for enough information about what changes to build a relationship.
In another problem, a shop’s stock uses a dark-to-light ratio of 3:2. After it adds six dark and four light pieces, the ratio stays 3:2. Those additions have been made in the same ratio as the existing stock. Could you work out the original numbers using these facts alone? A group beginning with 9 and 6 would become 15 and 10. A group beginning with 30 and 20 would become 36 and 24. Both fit. One extra condition such as a final total would settle the size. This example teaches students to test whether the data determine one answer before committing to a procedure.
Return to the context after using algebra
A classroom puts red and blue markers into two bins. At first the counts are in the ratio 2:3. After eight markers move from blue to red, the ratio of red to blue becomes 3:2. Let u be one original unit. The original counts are 2u and 3u. After the move they are 2u + 8 and 3u − 8. The new relationship says that twice the red count equals three times the blue count, since the red count is three halves of the blue count. Write 2(2u + 8) = 3(3u − 8). Expanding gives 4u + 16 = 9u − 24, so 40 = 5u and u = 8.
Then return to the objects. The first counts were 16 red and 24 blue, and the new counts are 24 red and 16 blue. The total stays 40, and both ordered ratios agree. This particular question also has a shorter route. A change from 2:3 to 3:2 with the same total means the two counts have exchanged places. Their initial difference was eight, which is one initial unit. Encourage the student to use whichever reasoning is clear to them, with an explanation that a partner can follow. A harder variation may need an equation because the new ratio does not simply reverse the first.
For one variation, use an initial red-to-blue ratio of 7:5 and move six red pieces to blue. The final red-to-blue ratio is 5:4. The original counts may be written 7u and 5u. The new ratio gives 4(7u − 6) = 5(5u + 6). Expand to get 28u − 24 = 25u + 30, which yields 3u = 54 and u = 18. The original figures were 126 and 90. The result is 120 and 96. The ratio 120:96 = 5:4, and the total remains 216. An independent check protects against an equation that has exchanged the names on one side.
Keep the mixture’s total and components in view
A craft group mixes one part blue paint with four parts white paint by volume. In the exercise, assume the mixture volume equals the sum of the measured volumes. The mixture contains one-fifth blue paint. A 750 mL batch therefore starts with 150 mL blue and 600 mL white. When they add 250 mL of white, the new volumes are 150 mL blue and 850 mL white. The ratio becomes 3:17. Blue now accounts for 150/1,000 = 3/20 of the mixture. Students can test whether the result is sensible. Adding only white leaves the blue amount fixed while the whole increases, so the fraction that is blue should fall.
Suppose the same original 750 mL batch is too pale for a second task and the group wants a blue-to-white ratio of 2:5. This time they add only blue. The 600 mL of white corresponds to five units in the new ratio, so each new unit is 120 mL. The intended blue amount is 240 mL. The original already contains 150 mL of blue, so 90 mL more is needed. Verify that 240:600 reduces to 2:5. The new whole is 840 mL. Some pupils use 750 mL as the final whole because the number appears near the start of the problem. Asking them to name the changed quantity reveals why the new batch cannot have the same total.
Draw the blue and white volumes in two columns for both questions. Put “initial” and “final” on the rows, and show the change between them. This layout becomes useful when quantities are given in different units. If a carton adds 0.09 L blue, record it as 90 mL next to the 150 mL already present. It is easier to check a column when every number in it is expressed in one unit. A child using a single equation might prefer to record the units in the definition of a letter.
Combine real amounts from batches of different sizes
One container holds 400 mL of a mixture in the ratio concentrate to water 1:3. Another holds 450 mL in the ratio 2:7. Assume volumes add and both containers are emptied into a larger jug. The first container holds 100 mL concentrate and 300 mL water. The second contains 100 mL concentrate and 350 mL water. After combining them there are 200 mL concentrate and 650 mL water. The final ratio is 4:13. The final concentrate fraction is 4/17 of the whole.
The unit in the first ratio is 100 mL and the unit in the second is 50 mL. A student who adds the written terms directly gets 3:10. That combination counts different-sized parts as though they had a common volume. Writing the actual amount from each container before joining the batches prevents the error. Once all columns use the same measurement unit, then addition is appropriate. The four parts of the first ratio and nine parts of the second represent different divisions of different wholes.
The starting concentrate fractions are 1/4 and 2/9, about 0.25 and 0.222. The final fraction 4/17 is about 0.235. It lies between them, as we would expect when mixing positive amounts of the two batches. This is a check on the direction of the result. It does not determine the exact value. The quantities combined matter. In the example the second batch is larger and the final proportion is slightly closer to its concentrate fraction. A calculation that makes the mixture more concentrated than both originals needs attention.
A new question can give equal quantities of both mixtures and ask what changes. Suppose there are 180 mL from each. The first contributes 45 mL concentrate, and the second contributes 40 mL. The combined volume is 360 mL, so the concentrate makes up 85/360 = 17/72 of the whole. In this setup, simply averaging the two starting fractions gives the same value because the starting volumes are equal. The exact condition clarifies why the shortcut works. When the contributions differ, write the actual volumes of concentrate and use the real total.
Notice the information a recipe leaves open
Imagine a snack group uses oats and seeds in the mass ratio 5:2. They plan to fill ten bags, but the mass per bag is unspecified. Could they find how much of each ingredient to bring? They can say every seven equal mass units contain five of oats and two of seeds. The number of bags alone gives too little information about the mass. If each bag is 140 g, the whole group needs 1,400 g, or 200 g per ratio unit. That gives 1,000 g of oats and 400 g of seeds. If each bag were 105 g, the result would be 750 g and 300 g. Confirm the bag size before presenting one total as the answer.
A pupil might ask whether they can multiply the ingredients by ten when making ten bags. They can do that if the amounts stated are for one bag and every bag is to be filled the same way. If the numbers 5 and 2 only describe the ratio, then multiplying gives 50:20, which tells us no absolute quantity. The arithmetic still preserves the comparison. It cannot supply a measurement missing from the problem. Ask the child to add one sentence of given information that would turn each version into a solvable question.
Diagnose a ratio error in three separate checks
A returned assignment may contain several red marks because one early decision was wrong. Look at the first line and divide the checking into three kinds. First, check the meaning. Do the labels match the wording and are the quantities comparable? Second, check the operation. Does the division use the number of units named by the given data? Third, check the answer. Does the allocation add to the stated total or satisfy the given difference? A child who chooses a good first line and miscalculates near the end deserves a different follow-up from a child who is choosing between part-to-whole and part-to-part.
Try an example where the child has a plausible but wrong answer. Share 144 paper flags in the ratio 5:7. A pupil says 72 and 72. The total is right. The equal shares fail the 5:7 condition because the second share should be larger. Another pupil says 60 and 96. The order is right and the ratio is wrong, while the total is 156. The correct parts are 60 and 84, obtained by dividing the 144 flags into 12 units worth 12 flags each. Compare the wrong responses with the original problem one condition at a time. This can be done without redoing everything from scratch.
You can make a follow-up card with a related problem. Write “I had trouble identifying the 12 ratio units” or “I chose the right unit and missed one multiplication.” Two days later, give a question in which the ratio is 4:5 and the total is 117. The shares are 52 and 65. If the child got the first example right only after seeing the answer, this fresh trial tests the decision again. Quietly let them write a line before suggesting a drawing. Note the smallest cue that helped, if a cue was necessary.
School contexts can change sooner than home worksheets do. One week a question might give a total, and next week it might give an extra amount added to one group. Use two questions with the same starting ratio but different information to practise reading. Ask the student to write “total,” “difference,” “one share” or “unchanged quantity” on a line above their working. In later practice, they can decide when the labels are useful and when they can carry the meaning in a shorter sentence.
Try new questions and check the answers later
Try a few questions first with the examples covered. Follow the school’s instructions on equipment and the form of written working. One line identifying the reference quantity or fixed count can prevent a detached calculation.
- A display uses grey strips 1 3/4 m long and white strips 0.84 m long. Find the simplest ratio of grey length to white length, then give white length as a fraction of the combined length of one strip of each kind.
- A box contains a yellow-to-purple ratio of 3:7. If there are 36 more purple counters than yellow counters, find both counts. Write the ratio of yellow to all counters if those are the only colours.
- At a collection point, softcover to hardcover books is 5:8, and hardcover to spiral books is 6:7. A record gives 301 books in these three categories. Can the ratios and this total all be correct? Find the number of spiral books if the correct total is 335.
- Two shelves originally hold tins in the ratio 3:2, top to bottom. The organiser moves seven from top to bottom and the ratio becomes 4:5. Find the original number of tins on each shelf.
- A tray has square to circular pieces in the ratio 5:6. Eight circular pieces are added from outside and the ratio becomes 5:8. Find the original total and the fraction of all pieces that are circular after the change.
- A jug holds 600 mL of a liquid with concentrate to water 1:4, and a second holds 350 mL at 2:5. The volumes are treated as additive. Find the concentrate-to-water ratio after combining them. Explain how to test whether the answer could be right without reconstructing every step.
- A club has 94 identical badges. One helper claims they can allocate them in an exact ratio of 4:7 without leaving any unused. Is the claim possible? If the club orders the smallest number of extra badges that will make the allocation work, how many must it order?
- A bowl contains white and red pieces in the ratio 4:3. Another has white and red pieces in the same ratio. After the bowls are combined, there are 51 red pieces. What can you deduce about white pieces across both bowls? Can you deduce how many red pieces started in the first bowl?
Answers and what to check
For Question 1, use centimetres. The two lengths are 175 and 84, so the ratio is 175:84 = 25:12 after dividing both by seven. The white strip accounts for 12/37 of the combined length. You can check by using the actual lengths to write 84/(175 + 84) = 84/259, which reduces to the same result. If a child writes 12/25, ask them to explain what 25 counts. It measures grey units. The whole uses 37 units.
For Question 2, the extra four units in purple represent 36 counters. Each unit is nine, giving 27 yellow and 63 purple. The total is 90 and yellow to all is 27:90 = 3:10. The difference 63 − 27 = 36 verifies the data. If a student divided 36 by ten, ask them to mark where the gap appears on a pair of horizontal bars. There are ten units across both bars, and four units mark their difference.
For Question 3, choose 24 as the common hardcover term. Multiply softcover:hardcover by three to obtain 15:24 and hardcover:spiral by four to get 24:28. The linked ratio is 15:24:28, with 67 units in total. A total of 301 would require each unit to be 301/67, which is not a whole number. Because the combined terms have no common factor above one, exact whole counts cannot have that total. The figures are inconsistent for whole books. The corrected total of 335 gives five books per unit, so there are 140 spiral books. Inspecting the original data before rounding is the skill being tested.
For Question 4, use one original unit u. The final counts are 3u − 7 and 2u + 7. The ratio gives 5(3u − 7) = 4(2u + 7). So 15u − 35 = 8u + 28, giving 7u = 63 and u = 9. The original counts are 27 and 18. The final counts are 20 and 25, and 20:25 simplifies to 4:5. A second route keeps the total matched in both comparisons. Five original units may be represented by 45 equal smaller marks, nine per original unit. Nine final units can also be represented by 45 smaller marks, five per final unit. Top changes from 27 to 20 of the matched marks, agreeing with the transfer of seven.
For Question 5, the square count stays fixed and the square term is already five in both ratios. The circular count rises by two units, so one unit accounts for four pieces. There were 11 × 4 = 44 pieces originally. There are now 20 squares and 32 circles. Circles are 32/52 = 8/13 of the whole. Check that the increase from 24 to 32 is exactly eight and that the square count remains at 20.
For Question 6 the 600 mL mixture has 120 mL concentrate and 480 mL water. The 350 mL mixture has 100 mL concentrate and 250 mL water. The result is 220:730 = 22:73. The concentrate fraction is 22/95, about 0.232. It sits between 1/5 and 2/7, the two initial fractions. That is a plausibility check. The measured contribution of each mixture determines the exact ratio, so check that the two actual amounts in the answer add to 950 mL.
For Question 7, an exact allocation needs a total divisible by 11. The nearest multiples on either side of 94 are 88 and 99. Five extra badges reach 99, giving 36 and 63. The smaller multiple shows an exact allocation could also be achieved if six badges were left unused, but the question asks to use every badge. There is a difference between a mathematical allocation and the conditions an organiser has set.
For Question 8, the combined bowls have the same ratio because adding two pairs with a common ratio preserves it. Three combined units are 51, and four are 68. That determines the total white count. Several allocations across the two bowls fit. For example, the red count could start at 21 and 30, or at 15 and 36. Each red count can be paired with four-thirds as many white pieces. A further piece of information, such as the number of pieces in the first bowl, would let you find its individual red count.
Decide what sort of support fits
A child who can label the two quantities and identify the given units independently may benefit most from a few varied examples at home. Choose one question where the total is known and one where only the difference is known. Use relevant numbers, give the child time to think, and ask them to explain the change in the calculation after they have tried both. A parent can observe the first move even without remembering which visual method the school uses. Keep an eye on the question and check whether the child’s answer still names the right quantities.
If the class uses an unfamiliar format or if the child is unsure what the next assessment covers, bring a marked exercise to the teacher. Ask, for example, how much written working the class is expected to show when converting a ratio of fractions. A question grounded in the student’s own working lets the teacher see which steps already make sense. The school is also the appropriate source for decisions about subject level and the current programme. Secondary 1 Mathematics syllabus guide
Consider a small group when a student is repeatedly stuck at the same early step, or when they can follow an explanation but have trouble transferring it into their own written working. In a group of up to three, look for time to try a problem independently, to explain a decision and to respond to a slight change in the question. A student might compare a bar drawing with an equation, then choose the one that gives the clearest explanation. Check later whether they can use that reasoning when the story changes. The evidence of progress is in the new work they can produce.
Pine Grove families considering eduKateSG should check the school-day journey to the teaching venue at 8 Fourth Avenue near Sixth Avenue MRT. Consider where the student will begin the trip, what else is scheduled that day and when there will be time to eat, rest or do a short review afterwards. Ask about an appropriate group and current arrangements before planning a weekly routine. Bring the latest marked ratio question and a fresh unaided attempt if possible. They will give the first conversation a specific starting point. Contact eduKate Singapore about Mathematics support
Start with one goal the student can recognise. “I can state what stayed fixed and show the starting and ending counts” is more useful for a transfer problem than a vague promise to get better at ratios. The next week, use a question with an addition from outside as well as a transfer. If the student sees that the fixed quantity changes between those cases and explains the adjustment without help, they have gained something that will carry into algebra and later examination problems. If the skill is still fragile, use the first incorrect line to decide what to ask about next.