Secondary 2 G3 Mathematics Tutor Bukit Timah | Nonlinear Input-Output Tables and Reverse Rules. Did you know? A machine can take two different numbers and return the same answer. When that happens, reversing its rule is more interesting than simply undoing addition or multiplication. This guide explains how to read the machine, complete its table and recognise where an output cannot reveal one unique input.
This is a quick-information Mathematics guide for Secondary 2 G3 students and families in Bukit Timah. We focus on nonlinear rules, second differences, square-number tables, reverse machines, permitted inputs and comparing tables with graphs. The ordinary introduction to linear input-output machines is covered elsewhere; here the learning job is to reason beyond a single straight-line rule without pretending every school tests advanced function notation now.
Start with a rule that squares its input: x→x². At input +3 the output is 9, but at input −3 the output is also 9. The rule is perfectly valid because each input has one output. Reversing the output 9, however, gives two possible original inputs. The distinction between a function and a uniquely reversible function matters long before formal upper-secondary algebra.
Find the relevant input-output rule
- Quick answer: a table describes pairs, not guesses
- First principle: one input can have only one output
- How to check a table before trusting it
- Constant first difference versus second difference
- Reverse machines need a domain check
- Why a machine with a denominator needs extra care
- Graphs are pictures of input-output relationships
- What a short table cannot tell you
- Forty original nonlinear and reverse-machine clinics
- Reverse a linear rule
- Reverse a square
- Reverse shifted square
- Reverse square with forbidden output
- Reverse square on nonnegative domain
- Reverse a reciprocal rule
- Reverse cube
- Reverse a rate machine
- Reverse a quadratic cost model
- Reverse a composite with domain
- A small-group experiment with one table but three different questions
- A two-week progression from linear to nonlinear understanding
- What makes a useful correction log for these questions
- Five questions Bukit Timah parents ask about function tables
- Published Bukit Timah small-group benchmark and official reading
Quick answer: a table describes pairs, not guesses
An input-output machine applies a stated rule to each permitted input and records the result. A function assigns exactly one output to each input in its domain, but different inputs may have the same output. For f(x)=x²+1, inputs −2,−1,0,1,2 give outputs 5,2,1,2,5. A nonlinear table usually does not have a constant first difference when inputs rise by equal steps. For a quadratic rule, the second differences are constant when the x-steps are equal.
To reverse a rule, set its output equal to the target and solve for input. For y=x²+1 and output y=10, x²=9, giving x=3 or x=−3 if all real inputs are permitted. If the original story permits only non-negative x, then the admissible input is 3. Write the domain before deciding how many reversed answers exist.
First principle: one input can have only one output
In the ordinary school use of the word ‘function’, a single permitted x must not map to two different y-values. The rule y=x² meets this requirement: for x=2, y is exactly 4. The fact that x=−2 also yields 4 is allowed; it does not make the rule invalid. This distinction helps students avoid a common misunderstanding that a function must have a different output for every input.
A table listing x=2 with y=4 in one row and x=2 with y=7 in another row cannot describe one deterministic function unless the input or rule has been incompletely specified. A table listing x=2 with y=4 and x=−2 with y=4 can describe a function perfectly well.
How to check a table before trusting it
- Read the input column as the actual x-values, not as arbitrary row numbers.
- Substitute the complete input, with brackets around negative numbers, into the stated rule.
- Calculate the output in a separate line if it contains squaring, division or brackets.
- Inspect whether one identical input has been assigned two conflicting outputs.
- If comparing neighbouring rows, make sure their input steps are equal before applying a finite-difference pattern.
- If asked to infer a rule from a short list of values, state the simple rule being assumed and check it against every row. A short finite table may fit many different functions.
Constant first difference versus second difference
Consider y=3x+2 with x=0,1,2,3. The outputs are 2,5,8,11; the first differences are +3,+3,+3. This is the familiar linear pattern. Compare y=x²+2 at the same inputs: outputs 2,3,6,11; first differences are +1,+3,+5. The first differences themselves rise by two, creating a constant second difference.
This is a useful recognition method for quadratic tables with equally spaced x-values, not a general proof that every table with four numbers is uniquely defined by one polynomial. For unequal x-steps, raw consecutive output differences cannot be compared in the same simple way.
Reverse machines need a domain check
For y=2x+5, reverse by subtracting 5 and dividing by 2, giving x=(y−5)/2. Each real output corresponds to exactly one real input because the nonzero linear slope makes the rule one-to-one. For y=x², reversing to a positive output normally offers two possible real inputs, +√y and −√y; for a negative output there are none.
The physical context can change the result. A square garden side length cannot be negative even though the abstract equation x²=36 has two algebraic roots ±6. When x represents a physical length, only x=6 cm makes sense. State that restriction explicitly rather than deleting roots without a reason.
Why a machine with a denominator needs extra care
The rule f(x)=1/(x−2) is undefined at x=2. An input-output table must leave that input excluded, not write a guessed large output. If the output is 1/3, solve 1/(x−2)=1/3 to find x=5, a permitted input. The denominator restriction is part of the machine’s definition.
This is a useful extension from straightforward quadratic rules. It connects input-output reasoning to algebraic fraction restrictions without requiring learners to master formal inverse-function notation. The important idea is still the same: what inputs does the original rule actually allow?
Graphs are pictures of input-output relationships
Every row (x,y) from a table becomes a coordinate point. Plot the values for y=x² and you see a curved parabola, symmetric about the vertical axis. A line such as y=2x+1 gives a straight graph with constant gradient. The shape reflects how outputs change as inputs increase.
A nonlinear curve is not evidence of a malfunctioning machine. It simply means the relationship is not one constant rate of change. One student’s missing y-value can be checked both through substitution and through whether the point fits the graph’s symmetry and overall direction.
What a short table cannot tell you
Suppose the table for x=0,1,2 has y=1,2,5. A simple fitting rule is y=x²+1. But an extra algebraic term multiplied by x(x−1)(x−2) is zero at all three listed inputs, so adding a multiple of that term gives another rule with the same three table entries. A finite table alone need not specify a unique function without an assumed rule family or additional information.
In school exercises, phrases such as ‘assume a quadratic rule’ or ‘find the simplest pattern’ provide context. A careful student should know what has been assumed rather than claim to have proved one global rule from only a few observations.
Forty original nonlinear and reverse-machine clinics
A square rule, five inputs
Input-output task. For y=x² use x=−2,−1,0,1,2. Complete outputs.
Worked rule and result. Outputs 4,1,0,1,4.
Why it is meaningful. The square of opposite numbers is equal and never negative. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Writing (−2)²=−4 confuses squaring brackets.
Changed check. Plot all five ordered pairs and recognise symmetry. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
A square plus one
Input-output task. For f(x)=x²+1 use inputs −2 to2.
Worked rule and result. Outputs 5,2,1,2,5.
Why it is meaningful. Each square gets one added afterwards. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. (x+1)² is a different rule.
Changed check. At input3 the output is10. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
A shifted parabola
Input-output task. For y=(x−2)² use x=0,1,2,3,4.
Worked rule and result. Outputs 4,1,0,1,4.
Why it is meaningful. The smallest output occurs when x=2. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Using x²−2 would produce different outputs.
Changed check. The symmetry axis is x=2. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
A negative quadratic
Input-output task. For y=−x²+4 use x=−2,−1,0,1,2.
Worked rule and result. Outputs 0,3,4,3,0.
Why it is meaningful. Negative of square produces a downward-opening graph with maximum4. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. −x² is not the same as (−x)².
Changed check. The roots are −2 and2. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
Quadratic first differences
Input-output task. For y=x² with inputs0,1,2,3,4, find first differences.
Worked rule and result. Outputs0,1,4,9,16; first differences1,3,5,7.
Why it is meaningful. Equal one-unit x-steps generate changing first differences. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Calling the rule linear because the inputs rise by one is wrong.
Changed check. Second differences are2,2,2. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
Another second difference
Input-output task. For y=2x² and inputs0,1,2,3, find second difference.
Worked rule and result. Outputs0,2,8,18; first differences2,6,10; second differences4,4.
Why it is meaningful. Leading coefficient two doubles the quadratic second difference for unit steps. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. A second difference4 is not a slope of a straight line.
Changed check. For x=4 the output is32. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
Linear comparison
Input-output task. For y=3x+1 use x=0,1,2,3.
Worked rule and result. Outputs1,4,7,10, first differences3,3,3.
Why it is meaningful. Constant first difference for equal input steps indicates a linear pattern. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Comparing only output sizes without gaps hides the rule.
Changed check. At x=4 expect13. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
Reverse a linear rule
Input-output task. Machine multiplies input by3 then adds2. Output is20.
Worked rule and result. 3x+2=20 yields x=6.
Why it is meaningful. Inverse operations undo addition then multiplication. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. 20/3−2 is the wrong reversal order.
Changed check. Test input6: 18+2=20. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
Reverse a square
Input-output task. Machine squares its real input; output25. Find inputs.
Worked rule and result. x²=25 means x=5 or−5.
Why it is meaningful. Both opposite real numbers square to25. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Only using positive root discards a legitimate abstract solution.
Changed check. If domain x≥0, only5 remains. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
Reverse shifted square
Input-output task. Machine squares input then adds1; output10.
Worked rule and result. x²+1=10 gives x²=9, so x=±3.
Why it is meaningful. Undo the added1 before taking roots. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. √10−1 is not the correct reversal.
Changed check. Both −3 and3 give10. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
Reverse square with forbidden output
Input-output task. Machine uses y=x² for real x. Can y=−4 occur?
Worked rule and result. No, because real squares are nonnegative.
Why it is meaningful. Output range is y≥0. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Imagining x=−2 gives +4, not−4.
Changed check. With output0, the only input is0. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
Reverse square on nonnegative domain
Input-output task. A square’s side length s≥0 gives area A=s². If A=49, find s.
Worked rule and result. s=7 units, not −7, because physical side length is nonnegative.
Why it is meaningful. Context restricts the abstract solutions. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Reporting ±7 as possible lengths is physically invalid.
Changed check. If A=64, s=8. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
A quadratic with two roots
Input-output task. For y=x²−4x+3, find inputs giving output0.
Worked rule and result. Factor (x−1)(x−3)=0, so x=1 or3.
Why it is meaningful. Different inputs can reach the same output in a quadratic function. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Choosing only the first root is incomplete.
Changed check. At both inputs, y=0. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
A quadratic with one repeated root
Input-output task. For y=(x−2)², find inputs producing0.
Worked rule and result. Only x=2.
Why it is meaningful. A square is zero only when its base is zero. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Two identical algebraic roots are not two distinct inputs.
Changed check. At x=1 and3 output1. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
A quadratic with no real reverse for one output
Input-output task. For y=(x−2)²+1, can output0 occur?
Worked rule and result. No, y≥1 for all real inputs.
Why it is meaningful. The minimum possible output is1. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Imagining x=2 gives zero omits the +1.
Changed check. At x=2 the output is1. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
A rational machine’s excluded input
Input-output task. For y=1/(x−2), what input must be excluded?
Worked rule and result. x=2.
Why it is meaningful. That makes the denominator zero and the output undefined. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Writing output0 at x=2 misrepresents division.
Changed check. For x=5, output1/3. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
Reverse a reciprocal rule
Input-output task. If 1/(x−2)=1/3, find permitted x.
Worked rule and result. x−2=3, so x=5.
Why it is meaningful. The reciprocal relation is solved on x≠2. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Cross multiplication should not admit forbidden x=2.
Changed check. At5 the value is one third. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
A third-power rule
Input-output task. For y=x³ use inputs −2,−1,0,1,2.
Worked rule and result. Outputs −8,−1,0,1,8.
Why it is meaningful. Odd powers preserve sign, unlike squares. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Negative input cubed is negative, not positive.
Changed check. Output27 comes from input3. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
Reverse cube
Input-output task. For real x, x³=−27. Find input.
Worked rule and result. x=−3.
Why it is meaningful. A cube root of a negative number is a negative real number. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Treating it like a square-root ± rule is wrong.
Changed check. (−3)³=−27. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
Absolute-value machine
Input-output task. For y=|x|, input−4 and4 yield what?
Worked rule and result. Both output4.
Why it is meaningful. Absolute value is distance from zero. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. It does not preserve the negative sign.
Changed check. Reverse output4 permits inputs−4 and4. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
An input gives two outputs?
Input-output task. A table lists x=2,y=4 and again x=2,y=7 under one fixed rule.
Worked rule and result. It is not a well-defined function of x as stated.
Why it is meaningful. The same input cannot have conflicting outputs. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Two different inputs sharing one output would be allowed.
Changed check. Fix by correcting data or specifying another input variable. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
Same output from two inputs
Input-output task. A table contains (−3,9) and (3,9). Can it be a function?
Worked rule and result. Yes; y=x² is one such function.
Why it is meaningful. Function definition requires uniqueness of output for each input, not uniqueness of input per output. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Calling it invalid because output repeats is wrong.
Changed check. Add (0,0) to fit the same example rule. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
Infer simple rule from outputs
Input-output task. For x=0,1,2,3, outputs are1,2,5,10; suggest a simple rule.
Worked rule and result. One simple rule is y=x²+1.
Why it is meaningful. Substitution gives all four listed pairs. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. A short table alone does not prove that no other function fits.
Changed check. Predict output17 at x=4 under the assumed rule. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
Infer another simple quadratic
Input-output task. For x=0,1,2,3 outputs2,5,10,17.
Worked rule and result. A simple fit is y=x²+2x+2.
Why it is meaningful. At inputs0,1,2,3 it gives2,5,10,17. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Assuming linear from only first two points fails.
Changed check. At x=4 the rule predicts26. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
Second difference and coefficient
Input-output task. For y=3x², x=0,1,2,3. Find second differences.
Worked rule and result. Outputs0,3,12,27; first differences3,9,15; second differences6,6.
Why it is meaningful. For unit x-steps, quadratic leading coefficient3 creates second differences6. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Second difference is not the y-intercept.
Changed check. At x=4 output48. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
A table with unequal steps
Input-output task. Outputs for y=x² at x=0,2,4 are0,4,16. First differences?
Worked rule and result. Differences4 and12; input steps are two units each.
Why it is meaningful. The equal-step comparison is valid here, but scale of second differences differs from unit-step table. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Using 2 as the step while assuming one misstates the coefficient.
Changed check. For x=6 output36, new first difference20. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
An incorrectly placed negative sign
Input-output task. Compute y=x²+2x−3 at x=−2.
Worked rule and result. 4−4−3=−3.
Why it is meaningful. Write (−2)² and 2(−2) separately. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Interpreting −2² as +4 without brackets is ambiguous or wrong.
Changed check. At x=−1 output−4. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
A restricted input domain
Input-output task. Rule y=2x+1 is applied only to n∈{0,1,2,3} items.
Worked rule and result. Outputs form the finite set {1,3,5,7}.
Why it is meaningful. A function can be mathematically defined more widely but model restricted to allowed inputs. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Using n=2.5 violates whole-item domain.
Changed check. At n=3 output7. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
Reverse a rate machine
Input-output task. A service fee is $10 plus $4 per item; total charge$30.
Worked rule and result. 4n+10=30 gives n=5 items.
Why it is meaningful. Fixed part must be removed before division. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Dividing30 by4 ignores the fixed charge.
Changed check. Check 5 items cost20+10=30. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
Reverse a quadratic cost model
Input-output task. A hypothetical area-like output is y=2x², x≥0. If y=50 find x.
Worked rule and result. 2x²=50, x²=25, x=5.
Why it is meaningful. Nonnegative domain removes the negative algebraic root. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. x=−5 would be algebraically valid without the restriction.
Changed check. At x=5 output50. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
Read x-y order
Input-output task. For y=x²+2, does (3,11) belong?
Worked rule and result. Yes, 3²+2=11.
Why it is meaningful. An ordered pair lists input first and output second. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. (11,3) does not give the same meaning.
Changed check. For x=−3 output11 as well. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
Reject a wrong table entry
Input-output task. For y=x²−3, a table reports input−2 gives output−7.
Worked rule and result. Incorrect: (−2)²−3=1.
Why it is meaningful. Square negative input before subtracting three. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. −2²−3=−7 used missing brackets.
Changed check. At input2 output1, revealing symmetry. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
Quadratic graph opening
Input-output task. For y=−2x²+4, describe graph and maximum.
Worked rule and result. It opens downwards with maximum4 at x=0.
Why it is meaningful. Negative leading coefficient makes outputs fall away from centre. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Interpreting 4 as an x-intercept confuses axes.
Changed check. Roots satisfy x²=2, so x=±√2. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
Output differences after linear shift
Input-output task. Compare f(x)=x² and g(x)=x²+5.
Worked rule and result. At each input, g’s output is five more; both have same first and second difference patterns.
Why it is meaningful. Adding a constant shifts the graph vertically without changing curvature. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Claiming g’s first differences increase by five is wrong.
Changed check. At x=2 f=4, g=9. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
Outputs after horizontal shift
Input-output task. For g(x)=(x−3)², which input gives minimum output?
Worked rule and result. x=3, output0.
Why it is meaningful. The square vanishes only when x−3=0. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Setting x=−3 confuses x−3 with x+3.
Changed check. Outputs at x=2 and4 are both1. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
A composite machine extension
Input-output task. First square x, then add3; input−2.
Worked rule and result. Output is (−2)²+3=7.
Why it is meaningful. Composition order is square then add. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. (x+3)² instead applies addition before squaring.
Changed check. At x=2 output also7. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
Reverse a composite with domain
Input-output task. Rule y=(x+2)² for x≥−2. Output25; find input.
Worked rule and result. x+2≥0, so x+2=5 and x=3.
Why it is meaningful. Restricted domain makes the reverse branch unique. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Using −5 would give x=−7, excluded by x≥−2.
Changed check. At x=3, output25. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
Not every nonlinear rule is quadratic
Input-output task. Rule y=2^x, x=0,1,2,3.
Worked rule and result. Outputs1,2,4,8, increasing multiplicatively.
Why it is meaningful. First differences1,2,4 and second differences1,2 are not constant. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Calling all curved tables quadratic is wrong.
Changed check. At x=4, output16. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
Finite table underdetermination
Input-output task. x=0,1,2 give y=1,2,5. Is y=x²+1 uniquely proved?
Worked rule and result. No; the listed rule fits, but more complicated rules can match the same finite rows.
Why it is meaningful. Finite observations alone cannot prove a unique rule without constraints. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Claiming it is the only possible relationship over all reals is unsupported.
Changed check. Add a multiple of x(x−1)(x−2), which vanishes at all three inputs. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
Check a reversed candidate
Input-output task. Machine y=x²+2x, output3. Solve x.
Worked rule and result. x²+2x−3=0=(x+3)(x−1), so x=1 or−3.
Why it is meaningful. The nonlinear rule can reverse to two possible inputs. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Choosing x=1 without testing other roots is incomplete.
Changed check. At both x values, output3. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
Check a rule by substitution
Input-output task. For y=2x²−x+1, input x=−1.
Worked rule and result. y=2(1)+1+1=4.
Why it is meaningful. Signs and squares are evaluated separately. The function’s domain and the actual direction of the problem decide whether we compute a forward output or solve a reverse input condition.
First mistake to diagnose. Writing −1²=−1 may spoil the result.
Changed check. At x=2 output8−2+1=7. Ask the pupil to verify with the original machine, without using an answer key, and to explain why any extra or excluded inputs matter.
A small-group experiment with one table but three different questions
Give three students y=x²+1 and the same five input values −2,−1,0,1,2. One student calculates and checks each y-value; another identifies which outputs repeat; the third interprets the graph’s symmetry and minimum. All three should obtain the common table 5,2,1,2,5. Ask why the repeating outputs do not invalidate the function.
Next, switch the rule to y=(x−2)²+1. The minimum now occurs at input2 rather than input0. Have the learners choose suitable table rows around the new centre. This detects whether they truly read the expression or simply repeated a memorised symmetric list.
A two-week progression from linear to nonlinear understanding
Week one: Start with simple linear input-output tables and consistent substitution, then compare them with x² and x²+1. Use equal input steps to inspect first and second differences. Keep negative-input brackets visible and ask students to explain the difference between one output per input and one input per output.
Week two: Introduce reverse conditions such as x²+1=10, the effect of a restricted nonnegative domain, and a rational rule with one forbidden input. Mix a straight-line table and a quadratic table without their names. The last check is for the student to explain why a given short table might not uniquely establish a function over all real inputs.
What makes a useful correction log for these questions
Write the rule, the input, the student’s first wrong operation and a corrected numerical check. For instance, if y=x²+2x−3 at x=−2 was evaluated as −11, the learner may have lost the sign of the squared term or the linear term. Substituting with brackets separates the two possibilities. A second row at x=+2 helps test the symmetry claim.
In a three-pupil class, one person can inspect the numerical substitution, another the table’s difference pattern and a third the plotted graph. Rotate the jobs across a changed rule, so everyone practises independent work rather than becoming a permanent checker.
Five questions Bukit Timah parents ask about function tables
Is an input-output table the same as a function? A table can represent some of a function’s input-output pairs, but it may give only a finite sample. The underlying rule may apply to many more inputs. Check whether the given inputs, outputs and intended domain define a consistent relationship.
Why do two inputs sometimes have the same answer? A valid function requires a unique output for each input, not a unique input for each output. A square rule gives 9 at both +3 and −3. This explains why some reverse equations have two roots.
Can a function be nonlinear without being quadratic? Yes. Absolute value, reciprocal and exponential relationships can be nonlinear, with different restrictions and patterns. For Secondary 2, learn the table and graph ideas first, then label any later-year functions as extensions where appropriate.
What if a table uses unequal x-steps? You can still substitute and plot correctly, but basic first- and second-difference shortcuts assume equal steps. Comparing a gap over one unit with a gap over three units as if they are the same interval will distort the interpretation.
Should we teach inverse-function symbols immediately? Not necessarily. Reverse a simple rule using ordinary equations first: output 11 from 2x+3 means x=4. Later, formal inverse functions require attention to whether the original is one-to-one on its domain. Understanding the permitted inputs is the more useful foundation.
Published Bukit Timah small-group benchmark and official reading
The unchanged eduKateSG small-group Mathematics reference describes a three-pupil tutorial format with about 1.5 hours of weekly teaching, guided corrections and published lessons at 8 Fourth Avenue, Singapore 268674 near Sixth Avenue MRT. This Bukit Timah guide is not a claim of new premises or a particular vacant slot.
G3 is a Mathematics subject level under Full Subject-Based Banding. The MOE G2/G3 Mathematics syllabus provides progression context; the child’s current school assessment scope determines whether nonlinear tables are immediate work or enrichment.
For a clear next step, read quadratic graphs from tables of values, linear graphs and gradients, and forbidden rational inputs. These complement the current focus on nonlinear forward and reverse machines.
Parents can review the original programme reference to enquire about Secondary 2 G3 Mathematics tutorials near Bukit Timah. Bring a marked table or graph question and the student’s next tested chapters. Confirm group fit, timetable and availability with the centre.
Editorial review: 27 October 2026. Original input-output tasks are mathematical teaching illustrations, not copied school exam papers. Formal inverse-function and exponential extensions may fall outside a particular Secondary 2 test scope.
