A postTask scheduled with a TaskController’s signal can have dynamic priority when no explicit priority option is supplied. Calling controller.setPriority() can then change the queue priority for pending work associated with that TaskSignal. If the same postTask call supplies an explicit priority option, that priority is fixed; the signal can still cancel the task, but its later priority changes do not reprioritise that task.
This specialist guide belongs to the Websites root. It also connects to The Gold Standard of Education | Learning That Transfers into Life and the How X Works hub. The worked cases are original teaching examples; their values and event logs are stated so each conclusion can be checked.
eduKateSG · Websites
Find your next learning step
Use the routes to identify priority sources, compare signal-only and explicit-option tasks, trace prioritychange events and aborts, test pending versus running work, handle dependent signals and same-priority calls, and write evidence that never confuses cancellation authority with priority authority.
ROUTE 1 · CHAPTERS 1–3
Build the first model
Name the input, state, conversion or predicate before following user-visible results.
ROUTE 2 · CHAPTERS 4–5
Trace the decisive branch
Work the accepted path and the nearest boundary case with original examples.
ROUTE 3 · CHAPTERS 6–8
Change one premise
Rebuild the mechanism when state, value, realm, timing or object kind changes.
ROUTE 4 · CHAPTERS 9–10
Handle limits and failures
Keep abrupt completion, availability and application limits visible.
ROUTE 5 · CHAPTERS 11–12
Verify and explain
Use a decisive fixture, changed-context check and concise final account.
Chapter contents
Build the first model · Chapters 1–3
1. Read the priority decision in order
Trace the decisive branch · Chapters 4–5
Change one premise · Chapters 6–8
6. Trace prioritychange accurately
Handle limits and failures · Chapters 9–10
Verify and explain · Chapters 11–12
The short answer is that postTask first uses an explicit priority, otherwise a TaskSignal priority, otherwise the user-visible default. Chapter 1 focuses on read the priority decision in order. Begin with the postTask options dictionary, explicit priority presence, TaskController, TaskSignal identity, initial priority, fixed or dynamic queue, setPriority call, prioritychange event, previousPriority, abort state, enqueue order, callback start and completion. Writing those facts first prevents a familiar label or final summary value from replacing the mechanism or measurement basis that actually decides the result.
Worked example. Classify three calls that respectively supply priority, only controller.signal and neither. Treat every stated value as part of a controlled teaching fixture. Record the starting state before the operation, then record each conversion, selection, calculation, check or state transition in order. If a prerequisite fails, stop the trace there rather than inferring later effects from the usual path.
A useful first-principles question for read the priority decision in order is: what must already be true before this step can run? Use the rule above to separate the input contract from the result. Follow object identity, state and returned value independently. Two branches can print similar data while differing in ownership, timing, brand or future capability.
Now change exactly one premise. add an ordinary AbortSignal and retain cancellation without dynamic priority. Recalculate the trace from the changed fact rather than editing the old conclusion. Name the earliest event that differs, carry that difference through the remaining steps, and say which observations stay the same because their prerequisites did not change.
The main limit is this: the caller’s surrounding business importance is not an API priority source. Keep language semantics separate from processor strategy, host scheduling, browser support, trust policy and the meaning assigned by an application. A focused example can establish the stated mechanism without pretending to settle those broader questions.
Practical evidence check. write the decision tree beside each scheduled callback. Capture the reported values and failure conditions, but also preserve the calculation or event trail that led to them. A check that asserts only the last number or label can pass even when an earlier selection, conversion, grouping, state change or measurement basis was wrong.
A concise final explanation of read the priority decision in order should state the starting state, the governing rule, the ordered outcome and one boundary. It should not depend on a screenshot, one software message or an unstated assumption. That form is short enough for revision and precise enough for a reproducible technical note.
The short answer is that TaskController constructs a TaskSignal whose priority can be changed with setPriority. Chapter 2 focuses on create a dynamic tasksignal source. Begin with the postTask options dictionary, explicit priority presence, TaskController, TaskSignal identity, initial priority, fixed or dynamic queue, setPriority call, prioritychange event, previousPriority, abort state, enqueue order, callback start and completion. Writing those facts first prevents a familiar label or final summary value from replacing the mechanism or measurement basis that actually decides the result.
Worked example. Create a background controller and post task A with only its signal. Treat every stated value as part of a controlled teaching fixture. Record the starting state before the operation, then record each conversion, selection, calculation, check or state transition in order. If a prerequisite fails, stop the trace there rather than inferring later effects from the usual path.
A useful first-principles question for create a dynamic tasksignal source is: what must already be true before this step can run? Use the rule above to separate the input contract from the result. Follow object identity, state and returned value independently. Two branches can print similar data while differing in ownership, timing, brand or future capability.
Now change exactly one premise. change the controller’s initial priority to user-visible and rebuild the initial queue. Recalculate the trace from the changed fact rather than editing the old conclusion. Name the earliest event that differs, carry that difference through the remaining steps, and say which observations stay the same because their prerequisites did not change.
The main limit is this: dynamic describes the priority source, not constant movement or guaranteed execution. Keep language semantics separate from processor strategy, host scheduling, browser support, trust policy and the meaning assigned by an application. A focused example can establish the stated mechanism without pretending to settle those broader questions.
Practical evidence check. record controller identity, signal identity and initial signal.priority. Capture the reported values and failure conditions, but also preserve the calculation or event trail that led to them. A check that asserts only the last number or label can pass even when an earlier selection, conversion, grouping, state change or measurement basis was wrong.
A concise final explanation of create a dynamic tasksignal source should state the starting state, the governing rule, the ordered outcome and one boundary. It should not depend on a screenshot, one software message or an unstated assumption. That form is short enough for revision and precise enough for a reproducible technical note.
The short answer is that supplying postTask’s priority option makes that task’s scheduling priority immutable. Chapter 3 focuses on create an explicit fixed task. Begin with the postTask options dictionary, explicit priority presence, TaskController, TaskSignal identity, initial priority, fixed or dynamic queue, setPriority call, prioritychange event, previousPriority, abort state, enqueue order, callback start and completion. Writing those facts first prevents a familiar label or final summary value from replacing the mechanism or measurement basis that actually decides the result.
Worked example. Post task B with priority background and the same controller.signal. Treat every stated value as part of a controlled teaching fixture. Record the starting state before the operation, then record each conversion, selection, calculation, check or state transition in order. If a prerequisite fails, stop the trace there rather than inferring later effects from the usual path.
A useful first-principles question for create an explicit fixed task is: what must already be true before this step can run? Use the rule above to separate the input contract from the result. Follow object identity, state and returned value independently. Two branches can print similar data while differing in ownership, timing, brand or future capability.
Now change exactly one premise. change the explicit option to user-blocking while keeping the signal unchanged. Recalculate the trace from the changed fact rather than editing the old conclusion. Name the earliest event that differs, carry that difference through the remaining steps, and say which observations stay the same because their prerequisites did not change.
The main limit is this: the signal remains useful for abort even when it does not own priority. Keep language semantics separate from processor strategy, host scheduling, browser support, trust policy and the meaning assigned by an application. A focused example can establish the stated mechanism without pretending to settle those broader questions.
Practical evidence check. record priority option and signal as separate columns. Capture the reported values and failure conditions, but also preserve the calculation or event trail that led to them. A check that asserts only the last number or label can pass even when an earlier selection, conversion, grouping, state change or measurement basis was wrong.
A concise final explanation of create an explicit fixed task should state the starting state, the governing rule, the ordered outcome and one boundary. It should not depend on a screenshot, one software message or an unstated assumption. That form is short enough for revision and precise enough for a reproducible technical note.
The short answer is that setPriority changes the associated TaskSignal and the scheduler queue used by pending tasks tied to it. Chapter 4 focuses on reprioritise pending dynamic work. Begin with the postTask options dictionary, explicit priority presence, TaskController, TaskSignal identity, initial priority, fixed or dynamic queue, setPriority call, prioritychange event, previousPriority, abort state, enqueue order, callback start and completion. Writing those facts first prevents a familiar label or final summary value from replacing the mechanism or measurement basis that actually decides the result.
Worked example. Queue A at background, queue an unrelated user-visible task, then raise A’s controller to user-blocking before A starts. Treat every stated value as part of a controlled teaching fixture. Record the starting state before the operation, then record each conversion, selection, calculation, check or state transition in order. If a prerequisite fails, stop the trace there rather than inferring later effects from the usual path.
A useful first-principles question for reprioritise pending dynamic work is: what must already be true before this step can run? Use the rule above to separate the input contract from the result. Follow object identity, state and returned value independently. Two branches can print similar data while differing in ownership, timing, brand or future capability.
Now change exactly one premise. lower the controller instead and recalculate the eligible queue relation. Recalculate the trace from the changed fact rather than editing the old conclusion. Name the earliest event that differs, carry that difference through the remaining steps, and say which observations stay the same because their prerequisites did not change.
The main limit is this: setPriority does not rewind a callback that has already started. Keep language semantics separate from processor strategy, host scheduling, browser support, trust policy and the meaning assigned by an application. A focused example can establish the stated mechanism without pretending to settle those broader questions.
Practical evidence check. timestamp enqueue, priority change and callback start as ordered events. Capture the reported values and failure conditions, but also preserve the calculation or event trail that led to them. A check that asserts only the last number or label can pass even when an earlier selection, conversion, grouping, state change or measurement basis was wrong.
A concise final explanation of reprioritise pending dynamic work should state the starting state, the governing rule, the ordered outcome and one boundary. It should not depend on a screenshot, one software message or an unstated assumption. That form is short enough for revision and precise enough for a reproducible technical note.
The short answer is that a later TaskSignal priority change does not replace an explicit postTask priority. Chapter 5 focuses on keep the fixed task fixed. Begin with the postTask options dictionary, explicit priority presence, TaskController, TaskSignal identity, initial priority, fixed or dynamic queue, setPriority call, prioritychange event, previousPriority, abort state, enqueue order, callback start and completion. Writing those facts first prevents a familiar label or final summary value from replacing the mechanism or measurement basis that actually decides the result.
Worked example. Queue B with explicit background and controller.signal, then raise the signal to user-blocking. Treat every stated value as part of a controlled teaching fixture. Record the starting state before the operation, then record each conversion, selection, calculation, check or state transition in order. If a prerequisite fails, stop the trace there rather than inferring later effects from the usual path.
A useful first-principles question for keep the fixed task fixed is: what must already be true before this step can run? Use the rule above to separate the input contract from the result. Follow object identity, state and returned value independently. Two branches can print similar data while differing in ownership, timing, brand or future capability.
Now change exactly one premise. remove the explicit option and show the same call becomes dynamic. Recalculate the trace from the changed fact rather than editing the old conclusion. Name the earliest event that differs, carry that difference through the remaining steps, and say which observations stay the same because their prerequisites did not change.
The main limit is this: observing signal.priority change is not proof that every task using the signal changed scheduling priority. Keep language semantics separate from processor strategy, host scheduling, browser support, trust policy and the meaning assigned by an application. A focused example can establish the stated mechanism without pretending to settle those broader questions.
Practical evidence check. assert B’s configuration and compare its order with a signal-only control task. Capture the reported values and failure conditions, but also preserve the calculation or event trail that led to them. A check that asserts only the last number or label can pass even when an earlier selection, conversion, grouping, state change or measurement basis was wrong.
A concise final explanation of keep the fixed task fixed should state the starting state, the governing rule, the ordered outcome and one boundary. It should not depend on a screenshot, one software message or an unstated assumption. That form is short enough for revision and precise enough for a reproducible technical note.
The short answer is that a real priority transition updates signal.priority and dispatches prioritychange with previousPriority. Chapter 6 focuses on trace prioritychange accurately. Begin with the postTask options dictionary, explicit priority presence, TaskController, TaskSignal identity, initial priority, fixed or dynamic queue, setPriority call, prioritychange event, previousPriority, abort state, enqueue order, callback start and completion. Writing those facts first prevents a familiar label or final summary value from replacing the mechanism or measurement basis that actually decides the result.
Worked example. Move background to user-visible and record previousPriority background and current target priority user-visible. Treat every stated value as part of a controlled teaching fixture. Record the starting state before the operation, then record each conversion, selection, calculation, check or state transition in order. If a prerequisite fails, stop the trace there rather than inferring later effects from the usual path.
A useful first-principles question for trace prioritychange accurately is: what must already be true before this step can run? Use the rule above to separate the input contract from the result. Follow object identity, state and returned value independently. Two branches can print similar data while differing in ownership, timing, brand or future capability.
Now change exactly one premise. call setPriority with user-visible again and observe the no-change branch. Recalculate the trace from the changed fact rather than editing the old conclusion. Name the earliest event that differs, carry that difference through the remaining steps, and say which observations stay the same because their prerequisites did not change.
The main limit is this: event delivery is evidence of the signal transition, not of task completion. Keep language semantics separate from processor strategy, host scheduling, browser support, trust policy and the meaning assigned by an application. A focused example can establish the stated mechanism without pretending to settle those broader questions.
Practical evidence check. log event type, previousPriority, current priority and callback events separately. Capture the reported values and failure conditions, but also preserve the calculation or event trail that led to them. A check that asserts only the last number or label can pass even when an earlier selection, conversion, grouping, state change or measurement basis was wrong.
A concise final explanation of trace prioritychange accurately should state the starting state, the governing rule, the ordered outcome and one boundary. It should not depend on a screenshot, one software message or an unstated assumption. That form is short enough for revision and precise enough for a reproducible technical note.
The short answer is that priority changes affect scheduling of pending work and do not interrupt synchronous JavaScript already running. Chapter 7 focuses on separate reprioritisation from pre-emption. Begin with the postTask options dictionary, explicit priority presence, TaskController, TaskSignal identity, initial priority, fixed or dynamic queue, setPriority call, prioritychange event, previousPriority, abort state, enqueue order, callback start and completion. Writing those facts first prevents a familiar label or final summary value from replacing the mechanism or measurement basis that actually decides the result.
Worked example. Start a callback, call setPriority from another later task and note that the running callback must yield or finish first. Treat every stated value as part of a controlled teaching fixture. Record the starting state before the operation, then record each conversion, selection, calculation, check or state transition in order. If a prerequisite fails, stop the trace there rather than inferring later effects from the usual path.
A useful first-principles question for separate reprioritisation from pre-emption is: what must already be true before this step can run? Use the rule above to separate the input contract from the result. Follow object identity, state and returned value independently. Two branches can print similar data while differing in ownership, timing, brand or future capability.
Now change exactly one premise. split the callback with scheduler.yield and inspect the continuation’s inherited source. Recalculate the trace from the changed fact rather than editing the old conclusion. Name the earliest event that differs, carry that difference through the remaining steps, and say which observations stay the same because their prerequisites did not change.
The main limit is this: a long task can still harm responsiveness despite carrying a low or high label. Keep language semantics separate from processor strategy, host scheduling, browser support, trust policy and the meaning assigned by an application. A focused example can establish the stated mechanism without pretending to settle those broader questions.
Practical evidence check. place start, yield, priority change, resume and finish markers in the log. Capture the reported values and failure conditions, but also preserve the calculation or event trail that led to them. A check that asserts only the last number or label can pass even when an earlier selection, conversion, grouping, state change or measurement basis was wrong.
A concise final explanation of separate reprioritisation from pre-emption should state the starting state, the governing rule, the ordered outcome and one boundary. It should not depend on a screenshot, one software message or an unstated assumption. That form is short enough for revision and precise enough for a reproducible technical note.
The short answer is that the supplied signal can reject a pending postTask even when explicit priority owns scheduling. Chapter 8 focuses on keep abort authority independent. Begin with the postTask options dictionary, explicit priority presence, TaskController, TaskSignal identity, initial priority, fixed or dynamic queue, setPriority call, prioritychange event, previousPriority, abort state, enqueue order, callback start and completion. Writing those facts first prevents a familiar label or final summary value from replacing the mechanism or measurement basis that actually decides the result.
Worked example. Queue fixed-priority B and abort the controller before B starts. Treat every stated value as part of a controlled teaching fixture. Record the starting state before the operation, then record each conversion, selection, calculation, check or state transition in order. If a prerequisite fails, stop the trace there rather than inferring later effects from the usual path.
A useful first-principles question for keep abort authority independent is: what must already be true before this step can run? Use the rule above to separate the input contract from the result. Follow object identity, state and returned value independently. Two branches can print similar data while differing in ownership, timing, brand or future capability.
Now change exactly one premise. repeat with dynamic A and compare the same abort reason. Recalculate the trace from the changed fact rather than editing the old conclusion. Name the earliest event that differs, carry that difference through the remaining steps, and say which observations stay the same because their prerequisites did not change.
The main limit is this: abort does not imply that already-completed work is undone. Keep language semantics separate from processor strategy, host scheduling, browser support, trust policy and the meaning assigned by an application. A focused example can establish the stated mechanism without pretending to settle those broader questions.
Practical evidence check. assert promise rejection reason and absence or presence of callback-start markers. Capture the reported values and failure conditions, but also preserve the calculation or event trail that led to them. A check that asserts only the last number or label can pass even when an earlier selection, conversion, grouping, state change or measurement basis was wrong.
A concise final explanation of keep abort authority independent should state the starting state, the governing rule, the ordered outcome and one boundary. It should not depend on a screenshot, one software message or an unstated assumption. That form is short enough for revision and precise enough for a reproducible technical note.
CHAPTER 9 OF 12 · Handle limits and failures
9. Reason about several tasks sharing a signal
The short answer is that tasks using one dynamic TaskSignal share a priority source and can be reprioritised together. Chapter 9 focuses on reason about several tasks sharing a signal. Begin with the postTask options dictionary, explicit priority presence, TaskController, TaskSignal identity, initial priority, fixed or dynamic queue, setPriority call, prioritychange event, previousPriority, abort state, enqueue order, callback start and completion. Writing those facts first prevents a familiar label or final summary value from replacing the mechanism or measurement basis that actually decides the result.
Worked example. Queue A1 and A2 with one signal, then raise the controller before either runs. Treat every stated value as part of a controlled teaching fixture. Record the starting state before the operation, then record each conversion, selection, calculation, check or state transition in order. If a prerequisite fails, stop the trace there rather than inferring later effects from the usual path.
A useful first-principles question for reason about several tasks sharing a signal is: what must already be true before this step can run? Use the rule above to separate the input contract from the result. Follow object identity, state and returned value independently. Two branches can print similar data while differing in ownership, timing, brand or future capability.
Now change exactly one premise. give A2 an explicit priority and show only A1 remains dynamically tied for priority. Recalculate the trace from the changed fact rather than editing the old conclusion. Name the earliest event that differs, carry that difference through the remaining steps, and say which observations stay the same because their prerequisites did not change.
The main limit is this: shared priority does not merge callback results or cancellation handling. Keep language semantics separate from processor strategy, host scheduling, browser support, trust policy and the meaning assigned by an application. A focused example can establish the stated mechanism without pretending to settle those broader questions.
Practical evidence check. record per-task configuration plus the common signal identifier. Capture the reported values and failure conditions, but also preserve the calculation or event trail that led to them. A check that asserts only the last number or label can pass even when an earlier selection, conversion, grouping, state change or measurement basis was wrong.
A concise final explanation of reason about several tasks sharing a signal should state the starting state, the governing rule, the ordered outcome and one boundary. It should not depend on a screenshot, one software message or an unstated assumption. That form is short enough for revision and precise enough for a reproducible technical note.
The short answer is that TaskSignal.any can combine abort sources while its priority is fixed or follows a selected TaskSignal source. Chapter 10 focuses on use dependent signals carefully. Begin with the postTask options dictionary, explicit priority presence, TaskController, TaskSignal identity, initial priority, fixed or dynamic queue, setPriority call, prioritychange event, previousPriority, abort state, enqueue order, callback start and completion. Writing those facts first prevents a familiar label or final summary value from replacing the mechanism or measurement basis that actually decides the result.
Worked example. Create a dependent signal that follows a controller’s priority and combines two abort sources. Treat every stated value as part of a controlled teaching fixture. Record the starting state before the operation, then record each conversion, selection, calculation, check or state transition in order. If a prerequisite fails, stop the trace there rather than inferring later effects from the usual path.
A useful first-principles question for use dependent signals carefully is: what must already be true before this step can run? Use the rule above to separate the input contract from the result. Follow object identity, state and returned value independently. Two branches can print similar data while differing in ownership, timing, brand or future capability.
Now change exactly one premise. supply a literal priority in the any options and show the dependent priority becomes fixed. Recalculate the trace from the changed fact rather than editing the old conclusion. Name the earliest event that differs, carry that difference through the remaining steps, and say which observations stay the same because their prerequisites did not change.
The main limit is this: dependent-signal garbage collection and event propagation are implementation details with specified constraints, not application progress signals. Keep language semantics separate from processor strategy, host scheduling, browser support, trust policy and the meaning assigned by an application. A focused example can establish the stated mechanism without pretending to settle those broader questions.
Practical evidence check. assert abort source, priority source and dependent signal identity. Capture the reported values and failure conditions, but also preserve the calculation or event trail that led to them. A check that asserts only the last number or label can pass even when an earlier selection, conversion, grouping, state change or measurement basis was wrong.
A concise final explanation of use dependent signals carefully should state the starting state, the governing rule, the ordered outcome and one boundary. It should not depend on a screenshot, one software message or an unstated assumption. That form is short enough for revision and precise enough for a reproducible technical note.
CHAPTER 11 OF 12 · Verify and explain
11. Test queue relations without overclaiming time
The short answer is that priority is an ordering input within the scheduler model rather than a millisecond deadline. Chapter 11 focuses on test queue relations without overclaiming time. Begin with the postTask options dictionary, explicit priority presence, TaskController, TaskSignal identity, initial priority, fixed or dynamic queue, setPriority call, prioritychange event, previousPriority, abort state, enqueue order, callback start and completion. Writing those facts first prevents a familiar label or final summary value from replacing the mechanism or measurement basis that actually decides the result.
Worked example. Compare dynamic user-blocking A with fixed background B across repeated controlled runs. Treat every stated value as part of a controlled teaching fixture. Record the starting state before the operation, then record each conversion, selection, calculation, check or state transition in order. If a prerequisite fails, stop the trace there rather than inferring later effects from the usual path.
A useful first-principles question for test queue relations without overclaiming time is: what must already be true before this step can run? Use the rule above to separate the input contract from the result. Follow object identity, state and returned value independently. Two branches can print similar data while differing in ownership, timing, brand or future capability.
Now change exactly one premise. add unrelated browser work and keep the conclusion limited to configured priority sources. Recalculate the trace from the changed fact rather than editing the old conclusion. Name the earliest event that differs, carry that difference through the remaining steps, and say which observations stay the same because their prerequisites did not change.
The main limit is this: one fast run cannot prove a universal latency improvement. Keep language semantics separate from processor strategy, host scheduling, browser support, trust policy and the meaning assigned by an application. A focused example can establish the stated mechanism without pretending to settle those broader questions.
Practical evidence check. publish event order and configuration, with timing only as context. Capture the reported values and failure conditions, but also preserve the calculation or event trail that led to them. A check that asserts only the last number or label can pass even when an earlier selection, conversion, grouping, state change or measurement basis was wrong.
A concise final explanation of test queue relations without overclaiming time should state the starting state, the governing rule, the ordered outcome and one boundary. It should not depend on a screenshot, one software message or an unstated assumption. That form is short enough for revision and precise enough for a reproducible technical note.
The short answer is that a complete explanation states whether priority is explicit, signal-derived or default and states cancellation separately. Chapter 12 focuses on write the configuration receipt. Begin with the postTask options dictionary, explicit priority presence, TaskController, TaskSignal identity, initial priority, fixed or dynamic queue, setPriority call, prioritychange event, previousPriority, abort state, enqueue order, callback start and completion. Writing those facts first prevents a familiar label or final summary value from replacing the mechanism or measurement basis that actually decides the result.
Worked example. Explain why setPriority moves A but not B even though both carry the same signal. Treat every stated value as part of a controlled teaching fixture. Record the starting state before the operation, then record each conversion, selection, calculation, check or state transition in order. If a prerequisite fails, stop the trace there rather than inferring later effects from the usual path.
A useful first-principles question for write the configuration receipt is: what must already be true before this step can run? Use the rule above to separate the input contract from the result. Follow object identity, state and returned value independently. Two branches can print similar data while differing in ownership, timing, brand or future capability.
Now change exactly one premise. remove B’s explicit option and update the receipt to show dynamic ownership. Recalculate the trace from the changed fact rather than editing the old conclusion. Name the earliest event that differs, carry that difference through the remaining steps, and say which observations stay the same because their prerequisites did not change.
The main limit is this: capability and interoperability checks still bound real deployment. Keep language semantics separate from processor strategy, host scheduling, browser support, trust policy and the meaning assigned by an application. A focused example can establish the stated mechanism without pretending to settle those broader questions.
Practical evidence check. review every task for priority source, abort source, pending state and observed result. Capture the reported values and failure conditions, but also preserve the calculation or event trail that led to them. A check that asserts only the last number or label can pass even when an earlier selection, conversion, grouping, state change or measurement basis was wrong.
A concise final explanation of write the configuration receipt should state the starting state, the governing rule, the ordered outcome and one boundary. It should not depend on a screenshot, one software message or an unstated assumption. That form is short enough for revision and precise enough for a reproducible technical note.
Contents · Previous chapter · Return to the Websites subject guide
Frequently asked questions
Does controller.setPriority change every postTask using its signal?
It changes dynamic tasks whose priority comes from that TaskSignal. A task with an explicit priority option keeps its fixed scheduling priority.
Why pass a TaskSignal to a fixed-priority task?
The signal can still provide cancellation even when the explicit option owns priority.
Does reprioritisation interrupt a running callback?
No. It changes scheduling of pending work; synchronous JavaScript already running is not pre-empted.
What happens when setPriority repeats the current value?
The specification returns without a priority transition, so no new prioritychange event should be inferred.
Is an ordinary AbortSignal a dynamic priority source?
No. It supplies cancellation. Dynamic priority requires a TaskSignal and no overriding explicit priority option.
What evidence should a bug report include?
Include each task’s explicit option, signal identity and priority, setPriority events, abort events, enqueue order and callback start or rejection.
Continue through the verified reading routes
Start with the wider system
The Gold Standard of Websites · The Gold Standard of Education | Learning That Transfers into Life · How X Works hub
Compare the closest mechanisms
Separating Promise.try callback invocation from later promise reactions · Separating thenable property reads from later promise-resolution jobs · Retaining an event's current target before deferred work runs · Separating AbortSignal timeout accounting from elapsed wall time · scheduler.yield continuation priority and new postTask priority
Choose the next lesson by reader job
Use the subject root to move from this focused mechanism to the next verified question. Follow a specialist link when its preconditions match your code; return to the wider hub when the next task belongs to a different system.
Authoritative sources and evidence checks
WICG Prioritized Task Scheduling specification · TaskController interface · TaskSignal interface · WHATWG DOM: AbortController and AbortSignal
The WICG Prioritized Task Scheduling specification gives explicit postTask priority precedence over TaskSignal priority for scheduling, while retaining the supplied signal for cancellation. It defines TaskController.setPriority, TaskSignal.priority and prioritychange events. The report remains an incubator specification, so capability checks and bounded claims are required.