Science PSLE AL2 means a mark from 85 to 89 in Standard Science. It contributes 2 points to the four-subject PSLE Score. The result shows achievement within a published band; it does not reveal the exact mark or identify a particular weakness. For secondary-school decisions, parents need the complete score, the eligible Posting Group and the Science subject-level offer. For learning, the useful next step is to examine how the student connects evidence, scientific processes and the limits of a conclusion.
For Secondary 1 entry in 2027, use the 2026 PSLE results and the official posting instructions for that exercise. A student taking PSLE in 2027 would normally enter Secondary 1 in 2028. Information here is checked for families as at 17 November 2026; future school cut-off points and individual placements are not promised. PG1, PG2 and PG3 concern posting, while G1, G2 and G3 describe subject levels. The SEC starts for graduating secondary cohorts in 2027; it is not an examination taken by a child entering Secondary 1 that year.
- Standard Science AL2 is the 85–89 band; lower numerical AL scores contribute a lower PSLE total.
- Add English Language, Mathematics, Science and Mother Tongue Language to obtain the total; Higher Mother Tongue is not a fifth addition.
- A strong Science result can support a more demanding Science offer under Full Subject-Based Banding even when the overall Posting Group differs.
- Learn the distinctions between observation and inference, reliable and valid, and evidence and explanation.
- Use original investigations to practise naming the changed variable, measured outcome, controlled conditions and limits of a conclusion.
- Choose schools with the whole score, the correct Posting Group information, realistic preferences and daily learning needs.
- The examples below are teaching activities, not official examination questions or a promise of a particular future grade.
Guidance checked: 17 November 2026. This guide concerns Secondary 1 entry in 2027 following the 2026 PSLE. Pupils taking PSLE in 2027 normally enter Secondary 1 in 2028. Follow the current MOE posting notice and your school’s instructions for confirmed dates.
Find the explanation you need
Start with the score, follow the school-posting route, or jump straight to practical vocabulary and learning activities.
- 1. Read Science AL2 as a result, then look at the reasoning
- 2. Separate the Posting Group from the Science subject level
- 3. Worked investigation: when a cooling comparison is fair
- 4. Diagnose a response by locating its first unsupported step
- 5. Choose secondary schools using evidence about the whole day
Full chapter index · Official sources and further reading · AL1–AL8 subject guides
Contents
Chapters 1–4
Chapters 5–8
An AL2 result can sit beside many different learning profiles. One student may explain living processes clearly but need more care with units in data tables. Another may analyse graphs accurately but write conclusions that extend beyond the conditions investigated. A third may have no obvious recurring weakness and simply benefit from maintaining a steady reading and checking routine. The score itself does not tell us which account applies. Begin with available work and the student's account of how it was completed.
The official Standard bands are AL1 at 90 and above; AL2 at 85–89; AL3 at 80–84; AL4 at 75–79; AL5 at 65–74; AL6 at 45–64; AL7 at 20–44; and AL8 below 20. These are achievement bands, not positions in a classroom ranking. The MOE PSLE scoring guide is the reference for the boundaries. A reported AL2 cannot be converted into an exact mark such as 88.
Select three pieces of schoolwork: an explanation, a data question and an investigation question. Ask the student to identify the part they are most certain about and a part they would like to check. Then compare the reasoning with the teacher's feedback. This is more informative than treating every lost mark as the same problem. A missing unit, a misunderstood process and a conclusion unsupported by the data each call for a different response.
For a student already handling much of the work securely, refinement often means explaining precisely enough that another person can follow the reasoning. More scientific vocabulary helps only when it names the correct relationship. An answer containing “energy”, “particles” and “heat” is not automatically better than a shorter answer that explains the relevant transfer accurately. The test is whether the terms clarify what happened and why.
Parents can ask, “Which observation makes you say that?” or “Would your explanation still work if this condition changed?” These questions invite the student to examine an idea without turning the conversation into a contest. Allow time for a revised answer. Changing a conclusion when the evidence changes is a scientific strength. It is also a useful habit to carry into the greater independence of Secondary 1.
Standard subject Achievement Levels at a glance
| Subject AL | Mark range |
|---|---|
| AL1 | 90 and above |
| AL2 | 85–89 |
| AL3 | 80–84 |
| AL4 | 75–79 |
| AL5 | 65–74 |
| AL6 | 45–64 |
| AL7 | 20–44 |
| AL8 | Below 20 |
These are Standard subject bands. Foundation subjects use A, B and C, with their own mark ranges and posting conversions. A subject band does not reveal an exact mark within that band.
The four-subject PSLE Score is the sum of the English Language, Mathematics, Science and Mother Tongue Language scores. Four Standard results of English AL3, Mathematics AL2, Science AL2 and Mother Tongue AL4 produce 3 + 2 + 2 + 4 = 11. Science contributes two points, but all four results determine the total. Another student with English AL6, Mathematics AL6, Science AL2 and Mother Tongue AL7 has 21. The same Science band therefore appears in different posting situations.
The published Posting Group table gives PG3 for totals 4–20, a choice of PG2 or PG3 for 21–22, PG2 for 23–24, and a choice of PG1 or PG2 for 25. For totals 26–30, PG1 eligibility additionally requires both English Language and Mathematics to be AL7 or better. These conditions matter; it is incorrect to say that every numerical total from 4 to 32 automatically qualifies for one of these groups. The official school explanation of posting and subject options displays the table and its conditions.
An edge case helps prevent a common error. With Science AL2, the largest possible four-subject total is 2 + 8 + 8 + 8 = 26. That hypothetical profile necessarily has English AL8 and Mathematics AL8, so it does not satisfy the English and Mathematics requirement for the 26–30 PG1 row. Do not announce PG1 eligibility merely because the total is 26. The separate total-25 choice row should be read according to its own published rule.
If a student takes Foundation subjects, use the official conversion for the overall posting score. Foundation A, covering 75–100, maps to 6; Foundation B, covering 30–74, maps to 7; and Foundation C, below 30, maps to 8. A converted number serves the posting calculation. It does not mean that a Foundation examination and a Standard examination assessed identical content or demonstrated identical readiness.
Keep the result slip and the official options information together. Higher Mother Tongue is not added as a fifth subject to this four-subject total. Where a family's result combination or circumstances need clarification, the primary school can explain the applicable options. An online example should help the family read its documents; it should never replace those documents.
Posting Groups use the four-subject total
| Total PSLE score | Posting Group eligibility |
|---|---|
| 4–20 | PG3 |
| 21–22 | Choice of PG2 or PG3 |
| 23–24 | PG2 |
| 25 | Choice of PG1 or PG2 |
| 26–30 | PG1 only if both English and Mathematics are AL7 or better |
This is the general eligibility table, not a list of totals possible with every individual subject band. The article’s examples explain the relevant limits. Use the official result and eligible options issued to the child, including any applicable special arrangements. Totals 31–32 are outside the PG1–PG3 ranges shown here.
Posting Groups and subject levels answer different questions. The Posting Group is used for admission to secondary school. G1, G2 and G3 describe the levels at which subjects are offered under Full Subject-Based Banding. A student's starting combination can recognise a relative strength in one subject even when other subjects need a different pace. It is therefore misleading to describe an AL2 Science student as permanently belonging to one level in every subject.
For a student who would otherwise take subjects mostly at G1, a Standard AL1–AL5 result in the respective subject meets the initial criterion to offer that subject at G2 or G3. For a student taking subjects mostly at G2, Standard AL1–AL5 in the respective subject meets the criterion to offer it at G3. Science AL2 falls within those published thresholds. Confirm the actual offer and arrangements with the receiving school. The official Full SBB explanation sets out these subject-specific options.
Consider the earlier total-21 example. The family needs to understand the eligible PG2/PG3 choice and the school's subject offers together. Choosing PG2 does not erase the child's Science result or automatically require all subjects to remain at the same level. Equally, a more demanding Science offer does not turn the overall PSLE total into a different number. Write the two pieces of information on separate lines to keep the decision clear.
Ask practical questions about the offer. What reading and written explanation will be expected? How will laboratory routines be taught? What support is available if a student needs help interpreting a question? How are teachers consulted when the workload is being reviewed? A child may be enthusiastic about Science while still learning to manage several subjects, a new timetable and co-curricular activities. Interest and sustainability both belong in the discussion.
Later changes in subject level depend on the relevant school processes and evidence of learning; they are not an automatic reward for completing a holiday workbook. Maintain good work samples and encourage the student to seek feedback early. The eduKate guide to G1, G2, G3 and more demanding subjects can help families prepare questions, while the school’s actual offer remains the basis for action.
An observation is something noticed or measured, such as a thermometer reading falling from 38°C to 34°C. An inference is an interpretation based on evidence and scientific knowledge, such as reasoning that the water lost thermal energy to cooler surroundings. A prediction states an expected result before it is observed. These are related activities, but they should not be presented as interchangeable. A prediction can be sensible and still require testing.
A variable is a factor that can change. The changed variable is the factor deliberately varied in an investigation; the measured variable is the outcome recorded. A controlled variable is kept the same to make the comparison more meaningful. A fair test changes the intended factor while controlling other relevant conditions. Merely writing “keep everything the same” is not specific enough: name the factors that could affect the result.
Evidence is information used to support an answer. A claim is the statement being supported. A conclusion is the judgement drawn from the investigation, while an explanation connects the outcome to a scientific process. A table may support the claim that one sample cooled more over a stated time; the explanation needs the relevant account of thermal-energy transfer. Quoting the table alone does not necessarily explain the process.
Repeat means carry out a measurement or procedure again. Reliability concerns the consistency of results; repeated measurements can help identify variation. Validity concerns whether the method supports the question being investigated. A consistently unfair comparison does not become valid just because it is repeated. Accuracy concerns closeness to the correct or accepted value, and precision concerns fineness or consistency of measurement in context. These ideas are useful for discussion even when a particular question uses simpler wording.
A pattern is a regularity in the results. A trend describes how values tend to change. An anomaly is a result that differs noticeably from the general pattern and deserves checking. A limitation is a reason to restrict what can be concluded. A comparison should identify both what is being compared and the relevant difference. A mechanism is the process that connects a cause to an outcome. Use each term in a sentence about a real example so that the vocabulary becomes a reasoning tool.
The following is an original teaching example, not a reported experiment. Two identical cups each contain 100 ml of water at 60°C. Cup A has a dry insulating sleeve around its sides. Cup B has no sleeve. Both cups stand in the same room, away from sunlight and fans, with their tops uncovered. After ten minutes, the water in Cup A is 48°C and the water in Cup B is 42°C. Assume the temperatures were measured appropriately using the same procedure.
The question is whether the sleeve affects cooling under these conditions. The deliberately changed factor is the presence of the sleeve. The measured outcome can be stated as the water temperature after ten minutes or the temperature decrease over ten minutes, provided the comparison uses the same definition. Cup A decreases by 60 − 48 = 12°C. Cup B decreases by 60 − 42 = 18°C. Cup B has a decrease 6°C greater than Cup A in this example.
A supported conclusion is: “Under the conditions tested, the sleeved cup's water cooled less over ten minutes.” This is narrower and more defensible than “Sleeves stop heat loss.” Both samples cooled. The sleeve reduces some thermal-energy transfer; it does not eliminate every transfer pathway. The open tops and other exposed parts still matter. A good explanation recognises that the warmer water transfers thermal energy to cooler surroundings and that the insulating sleeve slows transfer through the covered sides.
Relevant controlled conditions include the cup material and size, volume of water, initial water temperature, room conditions, measurement time and thermometer procedure. If Cup A began at 70°C while Cup B began at 60°C, the different starting temperature would complicate the comparison. If one cup were placed in front of a fan, moving air would introduce another difference. Naming these conditions shows why the comparison is useful; reciting an unexplained list is less effective.
Now change the claim: “This sleeve is the best material for keeping drinks warm.” The data do not establish that. Only one sleeve and an unsleeved cup were compared. Other materials, thicknesses, temperatures and durations were not investigated. A suitable next investigation could compare equal-thickness sleeves made of different materials while keeping the other relevant conditions consistent. This move from an overbroad claim to a testable question is a valuable AL2 consolidation exercise.
A parent can ask the child to answer in three sentences: one numerical comparison, one scientific explanation and one limitation. The purpose is to practise connected reasoning, not to enforce a universal answer template. Some questions require fewer sentences; others need more detail. Always return to what the actual question asks.
Consider this second original dataset. A class measures the height of similar seedlings over a short investigation. Group A receives a specified amount of water each day; Group B receives a smaller specified amount. The groups use the same type of seedling, similar starting heights, identical containers and soil, and comparable light conditions. After seven days, the average increase in height is 4 cm for Group A and 2 cm for Group B. This is a simplified teaching scenario, not a recommendation for how much water a real plant needs.
The observation is that Group A's average height increase was greater during the stated period. It is not that every plant in Group A grew exactly 4 cm. An average summarises several measurements and can hide differences between individual plants. Before concluding that all the plants responded alike, examine the separate readings. For instance, increases of 3 cm, 4 cm and 5 cm have the same average as 4 cm, 4 cm and 4 cm, but the variation differs.
The evidence is consistent with the tested watering conditions influencing growth. It does not establish that adding more and more water will always increase growth. The investigation compared two specified amounts over one period. Excess water can create different conditions, and height alone is not a complete measure of plant health. The careful conclusion stays within the tested range and names the measured outcome. This is how a student can be clear without pretending that one small dataset explains every possible situation.
Ask what would make the evidence stronger. Using several comparable plants in each group reduces dependence on one unusual seedling. Repeating the investigation can show whether the pattern recurs. Recording starting heights makes the change easier to interpret. Keeping conditions consistent supports a fair comparison. None of these steps gives permission to invent results or discard an inconvenient measurement merely because it does not fit the expected pattern.
If one plant is much shorter than the rest, record the result and investigate possible reasons. Was the measurement taken from the same reference point? Was the seedling damaged? Did the label become confused? A justified correction to a recording mistake is different from deleting an unexpected but genuine result. This distinction teaches honesty alongside method.
Finally, ask the student to separate “the plants grew” from “the plants obtained food from the soil”. Green plants make food through photosynthesis when the necessary conditions are available; water and mineral nutrients absorbed from the soil should not simply be called ready-made food. The wording matters because a fluent explanation can still contain the wrong mechanism. Check the scientific relationship before polishing the sentence.
A conductor allows a relevant form of transfer more readily, while an insulator reduces that transfer. Always specify the context: a discussion may concern heat or electricity. A material described as a poor conductor of heat does not make thermal energy disappear. In the cooling example, insulation changes the rate of transfer. Saying that the sleeve “produces cold” or “stores all the heat forever” would misrepresent the process.
Evaporation is the change from liquid to gas at the liquid’s surface. Condensation is the change from gas to liquid. If water droplets appear on the outside of a cold drink container, the explanation concerns water vapour in the surrounding air cooling and condensing on the cold surface. It is not enough to say “water came out” unless the question actually provides evidence of a leak. Locate the material before and after the change.
Force describes a push or pull. Friction is a force that opposes relative motion, or the tendency for relative motion, between surfaces in contact. It is not always harmful: friction helps shoes grip the ground. A claim that “less friction is always better” misses the purpose of the situation. Ask what needs to move and what needs to remain secure. Context determines whether reducing or increasing friction is helpful.
In an electrical discussion, a closed circuit provides a complete conducting path for current. A component is a part of the circuit, such as a cell, bulb or switch. A drawing should show the intended connections clearly. Do not infer that every bulb arrangement behaves the same merely because the same number of components is present. Examine the paths and the information supplied. Keep hands-on activities within teacher-approved, low-voltage classroom arrangements.
The new terms in this chapter join the earlier investigation vocabulary to form a manageable set. Instead of memorising thirty definitions in isolation, organise them around questions: What did we observe? What was changed? Which process could explain the outcome? What remains uncertain? Retrieval practice can be as simple as closing the notebook and explaining one example aloud, then checking the explanation against a reliable source.
The MOE Primary Science syllabus and the SEAB examination-format page help parents locate the relevant curriculum and assessment information. Use the document that applies to the child’s cohort. Additional terminology should clarify an age-appropriate idea rather than create pressure to race through secondary content before primary explanations are secure.
Imagine a student writes about the cup investigation: “Cup A stayed warmer because the sleeve is an insulator, so no heat escaped.” The response contains a useful term and a correct relative observation, but the final claim is too strong. The recorded temperature fell from 60°C to 48°C. The feedback should therefore focus on reconciling the explanation with the measurement: “What does the temperature decrease tell us about energy transfer?” This is more precise than telling the student to add more keywords.
A different student writes: “Cup A was 48°C and Cup B was 42°C.” That accurately quotes the final readings, but may not answer a question asking why the temperatures differ. The next teaching step is to connect the difference to the insulating sleeve and the rate of thermal-energy transfer. The missing step is explanation, not data reading. Two incomplete answers can look similarly short while requiring different instruction.
A third student writes: “The sleeve is always the best.” Here the difficulty is the scope of the conclusion. Ask which alternatives were tested and whether the data compare different sleeve materials. Have the student replace “always the best” with wording that names the tested comparison and time. This revision improves intellectual accuracy even when the student already understands the underlying Science concept.
Use a simple review record with four columns: question asked, evidence used, reasoning supplied and next revision. Keep one or two examples per week. A large spreadsheet of mistakes can become another task to maintain; a small record that changes the next practice session is more useful. Include successful responses as well. Students need to know which habits to repeat, not only which errors to avoid.
Check independence thoughtfully. If a student writes a strong answer after several prompts, note which prompts were needed. Later, offer a parallel question and see whether the student asks those questions internally. The aim is not to remove support abruptly but to make the reasoning increasingly self-directed. An AL2 result does not require every response to be instant or flawless.
Parents can say, “Your comparison is clear. Now show me the process that makes it happen.” That feedback recognises the accurate part and identifies one next action. Avoid turning a scientific correction into a judgement about effort, attitude or intelligence. The work provides evidence about this response; it does not justify a broad label for the child.
CHAPTER 9 OF 12
9. A four-week bridge that protects curiosity and improves precision
Week one is for observation and explanation. Choose two familiar, safe situations, such as water droplets on the outside of a cold bottle and a shadow changing position during the day. The student records what is actually observed, then offers an explanation separately. Check the relevant concepts with school notes or an appropriate reference. The visible goal is to keep the observation free from an invented cause and to make the explanation identify a plausible scientific process.
Week two is for fair comparisons. Return to the cup example or use a teacher-approved classroom investigation. The student writes the question, changed variable, measured outcome and three relevant controlled conditions before reading the supplied results. Then ask how an unequal starting condition would affect interpretation. This develops method rather than encouraging unsafe or elaborate home experiments. Paper-based analysis of a well-described investigation can be worthwhile practice.
Week three is for data and limits. Use a short table or graph from schoolwork. Ask for one numerical comparison, one trend and one statement that the data do not justify. Check units and the meaning of an average. If the student notices an unusual result, discuss how to investigate it honestly. The goal is to resist a confident but unsupported conclusion, especially when a familiar pattern seems obvious at first glance.
Week four is for transfer. Give a new context that uses a familiar idea: a different insulating arrangement, a plant-growth comparison or a question about material properties. The student explains the connection without copying the earlier answer word for word. Finish by reviewing one earlier response and describing exactly what improved. A useful outcome is “I now state which conditions were tested”, rather than a prediction of a future examination mark.
Sessions can be brief and adjusted around family routines, rest and other subjects. A possible pattern is two short independent tasks and one discussion each week. If the student is already explaining confidently, use the time for reading, questions and interests rather than manufacturing extra remediation. If a particular concept remains unclear, slow down and seek a teacher's explanation before multiplying the number of questions.
Keep curiosity visible. Let the child ask a question whose answer is not needed for an examination, then discuss how someone might investigate it. Scientific learning includes enjoying a puzzle, noticing a surprising result and admitting that more evidence is needed. Protecting those habits is compatible with careful preparation. The aim is a student who can reason with evidence and ask for help, not simply a notebook filled with longer answers.
Start the school discussion with the complete PSLE total and eligible Posting Group. Then use MOE SchoolFinder and official school information to examine the relevant category and year. A historical cut-off point describes a previous posting outcome; it is not a promised threshold for the next intake, a ranking of a school’s worth or a guarantee of a place. A Science AL2 result alone cannot identify the appropriate school list.
Families submit six school choices through the official process. Posting is based on score merit, with citizenship, school-choice order and computerised balloting used in that order for students tied for the last available places. Read the current MOE Secondary 1 posting guidance for the actual exercise. Put schools in a genuinely considered order, understanding the role of choice order without assuming it overrides a better PSLE Score.
For a student interested in Science, investigate what the school actually offers and how the student would participate. A programme name is only the start of the enquiry. Ask about ordinary classroom learning, teacher support, the expected commitment for enrichment and opportunities to explore interests. Do not assume that every advertised activity is available to every student in every year. Verify any selection criteria through the school.
Include travel and daily energy in the comparison. A longer journey can affect waking time, meals, homework and attendance at activities. A shorter journey is not the only consideration, but it is a real one. Make a sample weekday timetable with the child. The useful question is whether the routine leaves enough space to learn, rest and remain involved over several years.
A compact family worksheet can record the school, eligible group, historical reference year, estimated journey, relevant subject offer, programmes of interest and one question still to verify. Separate a confirmed fact from an impression gained at an open house. Let the child explain which environment seems manageable and why. Their preference deserves a hearing, while adults help check the evidence and implications.
For totals at the choice boundaries, the eduKate discussion of PSLE totals 21–22 and PG2/PG3 can support a more focused conversation. The final decision still needs the family’s actual results, official options and school information. No illustrative article can guarantee an individual placement.
CHAPTER 11 OF 12
11. Prepare for Secondary 1 Science without forecasting a SEC grade
The transition to secondary school involves more than harder content. Students learn new routines, manage materials across subjects and explain ideas to different teachers. A useful Science preparation habit is to keep a clear record: date, question, method or information, observations, interpretation and a question to clarify. The headings can be adapted to the task. The purpose is to make thinking traceable, not to turn every lesson into a full research report.
Reading also becomes important. When a question introduces an unfamiliar organism, device or setting, the student must distinguish the information supplied from background knowledge. An unfamiliar name does not necessarily make the underlying idea unfamiliar. Encourage the student to identify which familiar process is relevant and which details need to be taken directly from the question. This supports transfer without pretending that all problems use the same formula.
The Singapore-Cambridge Secondary Education Certificate begins with examinations for graduating secondary students from 2027. A child entering Secondary 1 in 2027 is beginning a multi-year journey; they are not sitting the SEC that year. Science AL2 does not convert to a particular future SEC grade. Later outcomes depend on the learning and subject choices that develop during secondary school.
Keep an accurate but calm sense of time. Today the family may need to understand posting and an initial Science offer. Later the student will encounter decisions appropriate to their stage. Trying to settle every later pathway immediately from a Primary 6 result can make the present decision harder to see. Ask the current school and receiving school about the decisions that actually need action now.
The eduKate Science inquiry and Secondary 1 bridge connects these reasoning habits with the next stage. For families organising preparation across subjects, the Clementi Secondary 1 Mathematics guide offers a related point of reference for the transition. Subject preparation should fit together with the child’s overall routine rather than become four competing sets of demands.
Does AL2 tell us exactly how many marks were lost? No. It identifies the 85–89 Standard band. It does not disclose an exact mark, the distribution of performance across topics or why an answer was unsuccessful. Use available schoolwork and teacher feedback for learning decisions, while recognising that school assessments are not a reconstruction of the national examination.
Must a student with AL2 practise only difficult questions? No. Choose practice according to evidence. A short question can expose an important distinction between observation and explanation. A longer unfamiliar problem can test transfer. The right balance depends on what the student can do independently, not on the label attached to the worksheet.
Can the student take G3 Science if the overall result leads to PG2? Standard Science AL2 meets the published AL1–AL5 criterion for a more demanding Science offer for students otherwise taking subjects mostly at G2. Confirm the actual G3 offer and arrangements with the receiving school. Keep that subject-specific decision separate from the overall Posting Group.
Does a high Science result compensate for every other subject? It contributes two points to the total and can support the relevant Science-level option. It does not cancel English or Mathematics eligibility conditions, guarantee a school or remove the need to support other subjects. Read the complete profile before making a posting judgement.
Should explanations always be long? No. They should contain the information and reasoning required by the question. An accurate comparison and a clear mechanism may be more effective than several repetitive sentences. When reviewing an answer, ask whether each sentence adds evidence, reasoning or a necessary condition. Remove claims that go beyond the investigation.
What should the family do first? Record the four results and official posting options, then select one Science response to discuss calmly. Identify one habit worth keeping and one precise refinement, such as naming the measured outcome or limiting a conclusion to tested conditions. That creates a useful next action without reducing the student to a score.
Official sources and further reading
Policy and examination sources were checked on 17 November 2026. Original learning examples in this article are teaching illustrations, not SEAB questions or official marking schemes. Historical school documents are cited for the policy they explain; their old administrative deadlines do not apply to this intake.
- MOE: PSLE scoring guide
- MOE: Secondary-school experience under Full SBB
- MOE: S1 posting
- MOE: SchoolFinder
- MOE: Primary Science syllabus
- SEAB: PSLE formats examined in 2026
- SEAB: Science 0009, examination from 2026
- SEAB: 2025 results release and subject-level eligibility
- Bukit View Secondary School: Posting Groups and initial subject-level options
- SEAB: Singapore-Cambridge Secondary Education Certificate
- Orchid Park Secondary School: Full SBB subject-level options
Explore the AL1–AL8 subject guides
Choose the subject result shown on the child’s PSLE result slip. These guides explain individual Standard subject bands; school posting uses the complete four-subject total and applicable eligibility conditions.
