VIEW THIS AS

Auto mode follows the Route Engine until you choose a viewpoint.

YOU ARE HERE

ROUTE CHECK

CONNECTED TO

WHAT NEXT

Use the canonical route for this room, or HELP if you are unsure.

Top 100 Vocabulary for Adults | Facilities Management Professionals

Top 100 Vocabulary for Adults | Facilities Management Professionals

Facilities-management vocabulary is the language of keeping buildings safe, usable, efficient and ready for the people who depend on them. Facilities professionals operate after construction, where systems age, occupants change, energy is consumed, failures occur and maintenance decisions accumulate into long-term asset performance.

This professional flagship belongs to the eduKate Adult Vocabulary for Professionals system. It complements Construction Management Professionals, Quantity Surveyors & Cost Consultants and Property Management Professionals.

The Four Banks

Building Operations & Maintenance: facility, asset, asset register, maintenance, preventive maintenance, predictive maintenance, reactive maintenance, work order, service request, backlog, inspection, condition assessment, lifecycle, replacement, spare part, critical asset, uptime, downtime, reliability, availability, mean time between failures, mean time to repair, maintenance schedule, planned shutdown, commissioning.

Building Systems & Energy: HVAC, chiller, AHU, fan coil unit, BMS, electrical system, generator, UPS, lighting, lift, escalator, plumbing, drainage, fire alarm, sprinkler, access control, CCTV, indoor air quality, temperature, humidity, energy use, utility, meter, energy efficiency, demand management.

Safety, Compliance & Risk: health and safety, hazard, risk assessment, permit to work, contractor induction, incident, emergency response, fire drill, evacuation, compliance, statutory inspection, certification, audit, security, business continuity, critical system, redundancy, emergency generator, legionella control, confined space, working at height, hot work, lockout-tagout, environmental compliance, duty of care.

Service, Vendors & Occupants: service level, SLA, KPI, helpdesk, vendor, contractor, tender, contract, scope, performance review, escalation, cleaning, security service, waste management, pest control, landscaping, reception, mailroom, workplace experience, occupancy, space utilisation, move management, complaint, satisfaction, facilities strategy.

Top 100 Facilities Management Vocabulary: Working Meanings

#WordProfessional meaning
1FacilityA building, site or operational environment managed for use.
2AssetA physical system or component with operational value.
3Asset registerA structured record of managed building assets.
4MaintenanceWork intended to preserve or restore asset performance.
5Preventive maintenancePlanned maintenance performed before failure.
6Predictive maintenanceMaintenance triggered by condition or performance data.
7Reactive maintenanceMaintenance performed after a fault or failure occurs.
8Work orderA formal instruction authorising maintenance or service work.
9Service requestA request from an occupant or stakeholder for facilities support.
10BacklogApproved maintenance work not yet completed.
11InspectionA structured examination of asset condition or compliance.
12Condition assessmentAn evaluation of current asset condition and remaining life.
13LifecycleThe period from installation through operation, maintenance and replacement.
14ReplacementSubstitution of an existing asset with a new one.
15Spare partA replacement component kept available for maintenance.
16Critical assetAn asset whose failure would cause significant operational impact.
17UptimeThe period during which a system remains operational.
18DowntimeThe period during which a system is unavailable.
19ReliabilityThe probability that an asset performs as required over time.
20AvailabilityThe proportion of time a system is ready for use.
21Mean time between failuresAn average interval between recurring asset failures.
22Mean time to repairAn average time required to restore a failed asset.
23Maintenance scheduleA timetable of planned maintenance activity.
24Planned shutdownA scheduled period when a system is intentionally taken offline.
25CommissioningTesting and verifying systems before or after major change.
26HVACHeating, ventilation and air-conditioning systems.
27ChillerA machine producing chilled water for cooling systems.
28AHUAir Handling Unit used to condition and distribute air.
29Fan coil unitA terminal HVAC unit containing a fan and heat-exchange coil.
30BMSBuilding Management System used to monitor and control building services.
31Electrical systemThe infrastructure distributing electrical power through a facility.
32GeneratorA machine providing electrical power during normal or emergency operation.
33UPSUninterruptible Power Supply providing short-term backup power.
34LightingSystems providing illumination.
35LiftA vertical transportation system for people or goods.
36EscalatorA moving staircase transporting people between levels.
37PlumbingSystems distributing water and removing wastewater.
38DrainageSystems removing stormwater or wastewater.
39Fire alarmA system detecting and signalling fire-related conditions.
40SprinklerAn automatic fire-suppression system discharging water.
41Access controlA system managing authorised entry to spaces.
42CCTVClosed-circuit television used for monitoring and security.
43Indoor air qualityThe condition of indoor air affecting occupant health and comfort.
44TemperatureA measure of thermal condition.
45HumidityThe amount of moisture present in air.
46Energy useThe amount of energy consumed by a facility.
47UtilityA supplied service such as electricity, water or gas.
48MeterA device measuring utility consumption.
49Energy efficiencyReduction of energy use for a given level of performance.
50Demand managementControl of when and how much utility capacity a facility uses.
51Health and safetySystems intended to prevent workplace and occupant harm.
52HazardA source with potential to cause injury or damage.
53Risk assessmentA structured evaluation of hazard likelihood and consequence.
54Permit to workA formal authorisation controlling specified high-risk activities.
55Contractor inductionBriefing external workers on site rules and risks before work begins.
56IncidentAn event causing or potentially causing harm or disruption.
57Emergency responseImmediate coordinated action following a serious incident.
58Fire drillA planned rehearsal of fire-response procedures.
59EvacuationThe organised movement of people away from danger.
60ComplianceConformity with applicable regulatory and organisational requirements.
61Statutory inspectionAn inspection required under applicable law or regulation.
62CertificationFormal confirmation that defined requirements are met.
63AuditA structured review against defined controls or standards.
64SecurityMeasures protecting people, property and information.
65Business continuityPlanning that enables critical operations to continue during disruption.
66Critical systemA system whose failure would cause major operational impact.
67RedundancyDuplicate capacity allowing operation after one component fails.
68Emergency generatorA backup generator supplying essential electrical loads.
69Legionella controlManagement of water systems to reduce Legionella-related risk.
70Confined spaceA restricted area with specific access and safety hazards.
71Working at heightWork performed where a fall could cause injury.
72Hot workWork producing flame, heat or sparks and requiring special controls.
73Lockout-tagoutA procedure isolating hazardous energy before maintenance.
74Environmental complianceConformity with environmental requirements.
75Duty of careAn obligation to take reasonable care under applicable circumstances.
76Service levelA defined standard of facilities-service performance.
77SLAService Level Agreement defining measurable service commitments.
78KPIA key performance indicator linked to a service objective.
79HelpdeskA central point for logging and managing service requests.
80VendorAn external provider of goods or services.
81ContractorAn external party performing facilities work.
82TenderA formal process of inviting and evaluating service bids.
83ContractA legally binding agreement defining service obligations.
84ScopeThe boundaries of work included in the service agreement.
85Performance reviewA structured assessment of vendor or service results.
86EscalationRaising an issue to higher authority or urgency.
87CleaningServices maintaining hygiene and appearance.
88Security servicePeople and systems protecting facilities and occupants.
89Waste managementCollection, handling and disposal or recovery of waste.
90Pest controlManagement of unwanted pests affecting facilities.
91LandscapingManagement of planted and external environmental areas.
92ReceptionThe front-of-house service managing visitors and enquiries.
93MailroomA service handling incoming and outgoing physical deliveries.
94Workplace experienceThe overall occupant experience of using the facility.
95OccupancyThe number or proportion of people using a space.
96Space utilisationThe degree to which available space is actively used.
97Move managementPlanning and coordination of occupant relocations.
98ComplaintAn expression of dissatisfaction requiring response.
99SatisfactionThe occupant’s evaluation of facilities service and environment.
100Facilities strategyA coherent plan connecting building operations, service, lifecycle and organisational needs.

Maintenance Is a Time Decision

Facilities teams constantly choose whether to inspect, repair, replace or wait. Delaying work can preserve cash today while increasing failure risk and lifecycle cost tomorrow. Good facilities management makes that trade-off explicit.

Scenario: The Chiller Fails Repeatedly

Do not treat every failure as an isolated repair. Review failure history, condition, operating hours, energy performance, spare-part availability and replacement economics. Repeated reactive maintenance can be a signal that the asset has crossed its economic replacement point.

Seven-Day Facilities Management Vocabulary Plan

DayPractice
1Build an asset register with criticality and lifecycle.
2Separate preventive, predictive and reactive maintenance.
3Map HVAC, electrical and fire-system dependencies.
4Audit safety, compliance and business continuity.
5Review vendor SLAs and occupant experience.
6Recall 75+ facilities terms.
7Write a one-page facility review linking condition, risk, cost and service.

Continue the Construction & Operations Wing

Conclusion

Facilities-management vocabulary helps professionals see buildings after handover as living operational systems. It connects asset condition, maintenance, safety, energy, vendors and occupants into one language of reliable performance.

Discover more from eduKate Singapore

Subscribe now to keep reading and get access to the full archive.

Continue reading