VIEW THIS AS

Auto mode follows the Route Engine until you choose a viewpoint.

YOU ARE HERE

ROUTE CHECK

CONNECTED TO

WHAT NEXT

Use the canonical route for this room, or HELP if you are unsure.

Distance–Time Graphs: Interpreting Stops, Speed and Changing Motion

Three learners review open books together at a classroom table, with stacks of textbooks, stationery and a whiteboard in the bright room.

A distance–time graph rises steadily, becomes horizontal for ten minutes, then rises again more steeply.

What happened?

The graph is not merely showing distance.

It is showing how distance changes as time passes.

On a distance–time graph, gradient is speed: the steeper the graph, the greater the distance gained per unit time.

The quick answer

  • Upward straight line → distance increases at a constant rate; on a cumulative-distance graph, this is constant speed.
  • Horizontal line → stopped.
  • Steeper line → greater speed.
  • Changing gradient → changing speed.
  • Total distance travelled cannot decrease. Distance from a fixed point can decrease during a return journey.

Gradient is speed

Suppose a graph passes through:

  • (0 h,0 km);
  • (2 h,120 km).

Gradient:

120 km ÷ 2 h = 60 km/h.

That is the speed over the interval.

The axes determine the unit of gradient: distance divided by time produces a speed unit.

A straight sloping segment means constant speed

If the graph is a straight line from (0,0) to (3,180), the gradient remains constant:

180÷3=60 km/h.

Every equal time interval produces the same distance increase.

Horizontal means stopped

Suppose distance remains 80 km from 1.5 h to 2 h.

Distance change=0.

Time change=0.5 h.

Gradient=0/0.5=0.

Speed=0.

The object is stopped during that interval.

Compare steepness using actual scales

A line that looks steep is not automatically fast.

Read axis values.

If one horizontal square represents 30 minutes and one vertical square represents 20 km, then a rise of 3 squares over 2 horizontal squares means:

  • distance=60 km;
  • time=1 h;
  • speed=60 km/h.

Counting squares alone would ignore the scales.

Multi-stage journey

A journey might show:

  • 0 to 1 h: distance rises 0→50 km;
  • 1 to 1.5 h: distance stays at 50 km;
  • 1.5 to 2.5 h: distance rises 50→130 km.

Stage 1 speed:

50/1=50 km/h.

Stop:

0 km/h.

Stage 2 speed:

(130−50)/(2.5−1.5)=80 km/h.

The graph encodes the same stage table a journey problem might provide in words.

Whole-journey average speed

For the journey above:

Total distance=130 km.

Total elapsed time=2.5 h.

Average speed from departure to arrival:

130/2.5=52 km/h.

The stop lowers the whole-journey average.

Stage gradients tell local speeds. Total distance divided by total relevant time tells whole-journey average speed.

Average moving speed

If the stop is excluded, moving time is:

1+1=2 h.

Average moving speed:

130/2=65 km/h.

This is a different quantity from average speed over the full elapsed journey.

Curved distance–time graphs

If the graph curves upward and becomes progressively steeper, speed is increasing.

If it curves and becomes progressively less steep, speed is decreasing while distance may still be increasing.

There is no one constant gradient for the whole curved segment.

Average speed over a curved interval

Take the two endpoints.

Average speed over the interval:

change in distance ÷ change in time.

Graphically, this is the gradient of the secant line joining the endpoints.

Instantaneous speed would require the gradient of a tangent, an idea developed formally in calculus.

Distance travelled versus distance from a point

The phrase “distance–time graph” can hide an important modelling distinction.

If vertical axis is total distance travelled, the graph cannot decrease because accumulated distance never goes backwards.

If vertical axis is distance from home, the graph can decrease when the traveller returns toward home.

Before interpreting a downward segment, read exactly what the vertical axis measures. “Distance travelled” and “distance from a reference point” are not the same quantity.

Return journey on a distance-from-home graph

Suppose distance from home rises from 0 to 100 km, stays constant, then falls back to 0.

The downward line means the traveller is returning toward home.

The magnitude of the negative gradient describes how quickly the distance from home is decreasing.

If the graph is specifically labelled total distance travelled, a downward line would be conceptually wrong.

Meeting problems

Two travellers can be shown on the same distance-from-origin graph.

Where their graphs intersect, they are at the same distance from the reference point at the same time.

If both use the same route and direction information supports it, that may represent a meeting point.

But equal distance from an origin does not always guarantee the same physical location on a branching or circular route.

Overtaking problems

If one line begins later but is steeper, it may intersect the earlier traveller’s line.

The intersection time is when both have covered the same reference distance.

The steeper line represents the faster traveller during that constant-speed segment.

Reading stop duration

If a horizontal segment runs from 10:20 to 10:50:

stop duration=30 minutes.

Do not read the vertical height of the segment as stop duration.

Reading distance at a given time

At a specified time, move vertically from the time axis to the graph, then horizontally to the distance axis.

The graph is functioning like a function: time is input, distance is output.

Finding time for a given distance

Start from the distance value on the vertical axis, move horizontally to the graph, then vertically down to the time axis.

If a horizontal distance level intersects the graph more than once on a distance-from-home graph, the traveller reached that distance at several times.

Units must be converted before comparing gradients

One graph may use minutes while another calculation uses hours.

A gradient of 1 km/min equals:

60 km/h.

Do not compare raw gradient numbers with incompatible units.

Graph slope versus speedometer reading

On a straight segment, graph gradient gives the constant speed.

On a curved graph, the local slope at one instant corresponds to instantaneous speed.

A whole-interval secant slope corresponds to average speed over that interval.

These are related but distinct ideas.

A stage table can reconstruct the graph

Suppose:

  • 0–1 h: 40 km/h;
  • 1–1.5 h: stop;
  • 1.5–2.5 h: 70 km/h.

Cumulative distance:

  • after 1 h: 40 km;
  • after 1.5 h: still 40 km;
  • after 2.5 h: 110 km.

Plot those stage boundaries and join constant-speed stages with straight segments.

The table and graph are equivalent representations of the same journey.

Common misconception 1: height of the graph is speed

Height is distance. Gradient is speed.

Common misconception 2: horizontal line means moving at constant speed

Horizontal distance means no distance change, so speed is zero.

Common misconception 3: steeper-looking line must be faster

Check axis scales and gradient units.

Common misconception 4: downward line always means negative speed

It depends on what the vertical variable represents. Total distance travelled should not decrease; distance from a reference point can.

Common misconception 5: average speed is average of stage gradients

Use total distance divided by total relevant time unless weights justify a simpler average.

A distance–time diagnostic ladder

  1. Can the learner identify the axes and units?
  2. Can the learner interpret gradient as speed?
  3. Can the learner identify a stop from a horizontal segment?
  4. Can the learner compare stage speeds using gradients?
  5. Can the learner calculate whole-journey average speed?
  6. Can the learner distinguish average moving speed from elapsed-journey average?
  7. Can the learner interpret changing gradient?
  8. Can the learner distinguish total distance travelled from distance from a reference point?
  9. Can the learner read meeting/overtaking intersections carefully?
  10. Can the learner reconstruct a graph from a stage table?

How this fits Secondary Mathematics

Distance–time graphs connect gradient, speed, functions, multi-stage journeys and real-world modelling. Their key discipline is semantic: understand what each axis measures before interpreting the shape.

The deeper lesson: motion becomes visible as change

A journey that takes pages of words can be compressed into a piecewise graph.

Each slope tells how quickly distance changes.

Each horizontal segment records time passing without movement.

A distance–time graph is a timeline of motion written geometrically: the measured distance is carried by height, its rate of change is carried by slope, stops flatten the graph, and every change in the journey appears as a change in the graph’s structure.

Sources and further reading

In this article, gradient equals speed for a graph of cumulative distance travelled. For a distance-from-home graph, the magnitude of the gradient equals speed only when motion is along the same straight route towards or away from home. Motion around home at a fixed distance can still have non-zero speed.