VIEW THIS AS

Auto mode follows the Route Engine until you choose a viewpoint.

YOU ARE HERE

ROUTE CHECK

CONNECTED TO

WHAT NEXT

Use the canonical route for this room, or HELP if you are unsure.

Bukit Timah IB Design Technology Tutor | IB Diploma SL & HL Small-Group Tuition Guide

Three learners review open books together at a classroom table, with stacks of textbooks, stationery and a whiteboard in the bright room.

If your child takes IB Design Technology in Bukit Timah, begin with a real piece of work. A marked response, a sketch with feedback or a record of a fair test will help you see which part of the design process needs attention. Ask eduKateSG whether suitable small-group support near Sixth Avenue is available for your child’s level and exam session.

This guide explains the IB Diploma course at Standard Level and Higher Level, including the revised assessment that begins in May 2027. It also gives you sample design problems so you can see what students are expected to do before deciding what support would help.

  • Match revision to the school’s exam session. The previous syllabus had its last assessment in 2026, and the revised course is first assessed in May 2027.
  • Both levels of the revised course take two written papers and complete an individual design project. Their paper timings and grade weightings differ.
  • For the revised project, the student starts with an existing product, investigates a user need, and develops a physical model to test the proposed redesign.
  • Use practice problems to build skill in specifying a user need, comparing options and explaining what a test result supports.
  • For a tuition enquiry, bring the level, exam session and one independent practice sample. Check current subject availability directly.

Contents

Check the school’s subject combination and course level

IB Design Technology sits in the Diploma Programme sciences group. It uses knowledge of people, materials and production to make and evaluate design choices. A student might compare two ways of holding a library resource upright, decide which property matters most and record whether a model meets a measurable requirement. The same student may have to explain why a manufacturing choice works for one production quantity and becomes less appropriate at a different scale. IB Design Technology course overview

Singapore schools publish their own course lists. UWCSEA East’s profile for the Class of 2026 lists Design Technology among its sciences and states that subjects are offered at both levels unless marked otherwise. The Canadian International School’s December 2025 secondary catalogue also lists Design Technology at SL and HL. Ask the specific school which levels, combinations and workshop arrangements apply to the incoming cohort. Some published school descriptions retain assessment language from an earlier syllabus, so check the exam structure using the IB’s versioned materials. UWCSEA East school profile · Canadian International School secondary course catalogue

If your child studied secondary Design and Technology, their experience of sketching, researching materials and testing a prototype can give them a starting point. At Diploma level, the student needs to explain how particular evidence changed the decision and apply concepts to unfamiliar products in a written exam. Use the school’s prerequisites and subject guidance to discuss course readiness. Students on the national SEC route can look up their own school syllabus before using any Diploma practice material. Design and Technology across G1, G2 and G3

How to discuss SL and HL with your child

The revised guide recommends 150 teaching hours at SL and 240 at HL. Both levels have a design project and a collaborative sciences project within the recommended teaching allocation. HL adds depth and content, including areas such as production systems and design for manufacture. For subject choice, ask the student whether they like checking what a user actually does, reading diagrams, documenting improvements and explaining the cost of a decision. A single impressive craft project gives less information about fit than a series of small decisions the learner can defend. IB Design Technology guide for first assessment in 2027

Check the whole Diploma timetable too. If a learner has two other subjects with significant coursework, ask the school when workshop access, testing and teacher feedback usually happen. One student may schedule repeated short model tests around other commitments. Another may need support breaking the first specification into steps. Either student benefits from knowing those conditions before the project is underway.

Contents · Next chapter

Match the assessment to the correct session

The model with final assessment in 2026

At SL, the previous model used a 45-minute Paper 1 worth 30%, a 90-minute Paper 2 worth 30%, and a design project worth 40%. HL used Paper 1, Paper 2 and Paper 3 at 20% each. Paper 1 lasted 60 minutes, and Papers 2 and 3 lasted 90 minutes each. The HL design project accounted for 40% and added development and decision-making related to commercial production. These details explain why older revision books still show three written papers at HL. IB SL brief through 2026 · IB HL brief through 2026

The revised model first assessed in May 2027

At SL, Paper 1 is 60 minutes and worth 20%, Paper 2 is 90 minutes and worth 40%, and the design project is worth 40%. At HL, Paper 1 is 90 minutes and worth 25%, Paper 2 is 150 minutes and worth 45%, and the design project is worth 30%. There is no separate Paper 3 under the revised model. Paper 1 uses multiple-choice questions. Paper 2 asks students to analyse a product through short and extended responses. The revised assessments draw on design in theory, design in practice and design in context. IB 2027 assessment outlines and project guidance

For paper practice, label every resource with the level and course version. An older product analysis question may still make good practice in thinking about materials. Use the matching syllabus, current practice questions and school advice to choose a timed set. If a student says “my resource has three papers”, let them find the printed syllabus year and compare it with the school’s planned session. This short check prevents a revision plan from devoting time to an obsolete paper format. IB curriculum update

Use the design themes together

For the redesigned cover of a school field notebook, theory may help a student evaluate why a flexible material bends at a hinge. Practice may help them choose a folding and fastening method. Context may prompt them to ask how left-handed and right-handed users open the notebook while holding a pencil. Those questions intersect. A material that makes one version easy to manufacture may make the hinge more difficult to use. Students can practise moving between these considerations by explaining one choice from two angles and then identifying a test that would help them decide.

Contents · Previous chapter · Next chapter

Worked example one on turning a need into a measurable specification

Imagine that volunteers at a school reading corner place three folders upright on a low shelf. An existing cardboard divider has thin side supports. A volunteer reports that lightweight folders slide forward during retrieval. A student interested in the problem could begin by looking at the divider in use, separating what people say from what happens during a retrieval and noting when the difficulty does or does not appear. This example is fictional and serves as standalone practice.

Define the existing problem before sketching a new shape

“Make it better” is too broad to guide a test. A reusable statement for this situation would be “A volunteer should be able to remove one thin folder from the front without dislodging the other folders.” The student still needs to learn which folder size the shelf normally holds, how much space is left in front of it, and whether the divider can be cleaned. A requirement can then set out a result, a condition and a way of observing whether the result occurred.

Imagine that the shelf measures 300 mm deep and books need 80 mm of front clearance. A proposed divider sitting entirely within that footprint could occupy at most 220 mm of depth. This figure describes the available space under the assumptions in this example. It tells us nothing about the minimum depth needed for stability. For that separate question, the student needs to trial more than one design.

Start a practice specification with the dimensions that must fit, a reliable retrieval action, and something about long-term use. A student might propose testing a single retrieval ten times without any remaining folder falling flat or leaving a marked shelf area. They could also specify a replaceable worn part, then check that it can be detached without harming the rest. Keep the justification next to each requirement. Space comes from a measured shelf. Retrieval reflects the task users struggle with. Replacement connects to maintenance.

Adjust the specification when evidence changes it

Suppose the student later learns that wider folders visit the shelf on Fridays. Instead of widening the whole base immediately, they first check how wide the folders are and whether Friday storage happens on the same shelf. An adjustable spacing idea is useful if the user needs to switch sizes often. A different divider is simpler if the two folders are always stored separately. A revision to the specification should say which observation changed the requirement and which question remains open.

This practice also reveals two common gaps in student work. A vague requirement gives the tester no consistent success condition. An exact number copied from an unrelated design gives a false impression of precision. In tutorials, ask how each requirement was derived and what observation would persuade the student to revise it. The answer matters as much as the number itself.

Contents · Previous chapter · Next chapter

Worked example two on testing a prototype and interpreting the result

Two paperboard versions of the folder divider are made for a classroom demonstration. Both use the same size of folders on the same shelf. Version A has a shallow front guide. Version B has a slightly taller guide. The student counts how many times a neighbouring folder falls out of position while removing the centre folder, and records retrieval time separately. They repeat each trial with the same starting arrangement and alternate which version is used first.

The fictional results show four dislodgements out of ten trials for A and one out of ten for B. A takes an average of three seconds to retrieve the centre folder, and B takes four seconds. These figures suggest a trade-off under the stated test conditions. B requires an extra second on average and keeps the other folders in position more often. A designer may consider that worthwhile for the library, where fallen folders interrupt several users. If speedy retrieval were the chief requirement and the other folders were rarely present, the judgement could change.

Separate the conclusion from the next question

This result comes from a small run on one shelf. It does not establish whether every volunteer can use B comfortably, or whether a fully finished surface would change friction. A next round could keep the same versions and compare how several consenting participants complete the task under the school’s agreed procedure. A further material test could hold guide height steady and vary the surface finish. Treat these as two separate questions so the evidence remains interpretable.

Suppose a practice student writes, “B is 75% better.” Ask them which measurement they mean. The observed count fell from four to one in equal numbers of trials. That is three fewer dislodgements and a 75% relative reduction in this particular run. It says nothing about the other criteria. A better evaluation names the outcome, the exact comparison, and the limit of the claim.

A useful next action may be to record the occasions B takes longest, or observe why retrieval takes longer. A folder could drag against the taller guide, or the user could be pausing to find where to hold it. Both produce the same timing result and suggest different redesigns. One observation of behaviour alongside a time measurement often adds information a second average would miss.

Contents · Previous chapter · Next chapter

Worked example three on responding to a Paper 2 product question

A fictional sports equipment room is comparing two stackable trays for dry indoor storage. Tray P is rigid, has an integral handle and is made as one piece. Tray Q consists of a base, a separate handle and two simple fasteners. Both hold the same assigned contents during the school’s trial. The room can store only four spare trays. A practice question asks which design the equipment room should choose if its priority is keeping as many trays usable as possible over several years.

A student can begin with a conditional recommendation. Q may suit the equipment room if a broken handle can be replaced quickly while keeping the base in use. P has fewer parts and may be easier for the room to maintain when handles rarely break and separate spares are unavailable. The choice depends on how often the handle fails, whether users can acquire replacements, and whether repair time disrupts everyday use. In a timed response, explain the consequences instead of listing disconnected advantages of each option.

Extend the answer to materials and production

Imagine the tray is used in only four rooms. The manufacturer may choose a production process with low setup cost and the flexibility to refine handle shape after feedback. If the tray is later ordered for hundreds of rooms, tooling cost, repeatability and the time required to assemble each tray could alter that choice. A one-piece design avoids the assembly of the handle. A modular tray could still have an advantage in repair if the parts are obtainable and the attachment remains durable. The student should avoid assuming a process applies without data about materials and quantities.

A common written gap appears when a student repeats something already in the stimulus. “Q has a separate handle” identifies a feature. “Q lets the room replace a broken handle without replacing the base, if it stocks the part” explains why the feature is relevant. The conditions in the second sentence give the examiner evidence of design judgment. Practise the same move with accessibility and environmental claims. Identify a user or lifecycle stage, explain the effect, then say which evidence would make the effect credible.

Contents · Previous chapter · Next chapter

Build a short revision cycle for the written papers

Practice selecting a concept under pressure

Suppose a practice stimulus shows a carrying case with a thin wall that bends when a handle is held. The question asks why a designer might use ribs on the inside of the case. Some students start by defining injection moulding or outlining the benefits of plastic. A relevant response explains that the ribs can improve the stiffness of the wall in the region being loaded, then connects the change to the case bending less when carried. The details of wall thickness and rib geometry matter. A good classroom follow-up asks whether a small trial using two paper models could compare resistance to bending under the same light load. The exercise links terminology, a diagram and an observable performance criterion.

Use a second example after a one-day delay. Replace the carrying case with a flexible shelf marker in the library and ask what would happen if the marker were intended to bend out of the way during retrieval. A stiffer section might now obstruct use. This is a quick way to find out whether the student has memorised a property as inherently good or can connect it to the job the product needs to do. In a multiple-choice question, the same habit helps the student distinguish a generally true statement from the option that fits the conditions.

Review a claim using a stated boundary

A school is comparing two empty containers for storing pencils at desks. The lighter container uses less material per unit, and the heavier container is expected to stay in service longer. A practice answer that calls the lighter one environmentally preferable needs to say what it compared. If the question concerns material used over three school years, a simple scenario may help. If a 60 g container is replaced twice and a 100 g container is kept throughout, the total is 180 g versus 100 g under those assumptions. The heavier option then uses less material by mass over the period. Separate this illustrative calculation from a claim about overall environmental impact. Processing, service life and disposal may all affect the broader comparison, and purchasing records would be needed to check the replacement assumption.

Make the next practice task diagnostic

After a marked exercise, ask the student to select two mistakes and name what happened. “Forgot the term” calls for a recall exercise. “Used the data but forgot its units” calls for a check on the measurement. “Chose the right idea without linking it to the user” calls for a new applied response. On the next attempt, give a new product and the same type of decision. Start with a brief untimed explanation, then set a time limit when the learner can make the connection reliably. If a student can use the skill in two contexts and explain what changed between them, a family has something more specific to track than the number of pages completed.

Contents · Previous chapter · Next chapter

Keep the revised design project student-owned

The revised project starts from an existing product. The student investigates how it serves intended users, identifies a problem that can be addressed and develops and tests a redesigned solution. The IB calls for a physical fidelity model for testing and evaluation. A model may represent the features being tested with different degrees of realism. A rough card mock-up could help compare spacing. A model used for repeated handling may need features that behave more like the intended solution. Discuss material choice and workshop procedure with the school. IB project requirements and assessment criteria

The IB guide recommends about 50 hours for this assessment task at both levels. Its common criteria follow the project from understanding users and defining the problem through modelling, designing and presenting the solution. The school sets practical milestones and guides the expected evidence, including figures and source references. Use the guide and teacher feedback together to see whether the proposed work is feasible given equipment, permissions, time and access to participants.

Record observations before deciding what they mean

A photo of a model can be a useful reminder, and a labelled photo shows what changed. Add which version it shows, what was tested and the condition that mattered. Keep user observations separate from measurements and interpretations. If a student writes “easier on the hands”, ask whether that is a participant’s comment, the designer’s reading of the trial or something their test method measured. The distinction makes the evidence easier to review later.

Students can annotate iterations as they go. After each meaningful change, record what prompted the change, what was kept fixed in the test, and one possibility for retesting. One concise log entry might say the guide was lowered because two participants reported reduced access, and the next test will compare reaching the folders when the shelf is filled. Clear notes protect against the habit of writing a plausible account from memory at the end of a long term.

Get appropriate help and keep a clear trail

Ask the school before doing research with people, gathering images, handling school equipment or collecting observations outside the classroom. Prefer the school’s procedures on permissions, consent, anonymity and safe use. A parent can help find time, arrange permitted access and ask the student what the test means. A tutor can explain the difference between a measurement and an inference by working on a separate exercise. The assessed idea development, making, testing, analysis and writing must remain the student’s own work within the rules the school sets.

When students use published images, product literature, data or other sources, they should record where each comes from and use the citing method required by their school and the IB. For digital design tools or AI assistance, ask the teacher which uses are allowed and how to acknowledge them. Keep original sketches, files and trial records so the student can explain the work in their own words. IB academic integrity guidance

Contents · Previous chapter · Next chapter

Decide what small-group practice would need to improve

Ask your child to show one recent task without explaining it for them. A first sketch with little context may point to a missing user observation. A well-drawn portfolio with no trial results may indicate a testing gap. A short-answer script may show that the student can recall concepts but struggles to select one that explains the product. Choose one gap that can be checked after a week. In a suitable small group, each student should have time to make a choice and explain it aloud before hearing everyone else’s.

Use separate tasks for different gaps

For recall, try five short questions about properties and uses, then ask which property affects a particular product in use. For application, compare two product options in a fresh context. For evidence, ask students to improve a proposed specification or identify a fair comparison. For extended responses, set a small reading time and let each student draft a conclusion supported by two details from the product stimulus. Work productively on one gap at a time and use unseen follow-up questions to see whether progress transfers.

The examples above also make a useful group discussion. One person makes the case for the taller divider, a second takes the user’s perspective on retrieval speed, and a third checks whether the tests are fair. They can all reach similar recommendations for different reasons. Give each a new stimulus afterwards, such as a holder for laminated timetable cards on a counter. The student who can derive a relevant success condition for the new situation is becoming less dependent on a memorised folder example.

Ask any prospective tutor how they handle a mixed-level group and how often they use course-version-specific materials. Invite them to explain which work they can examine independently of the student’s actual assessed project. Where a student specifically needs access to equipment or project supervision, confirm those arrangements with the school. A tuition enquiry should establish current availability and what the group can actually address.

Contents · Previous chapter · Next chapter

Questions Bukit Timah families often ask

Do I need access to a workshop to begin preparing?

Many useful early exercises use sketches, measurements or classroom-approved paper models. Timed paper practice can centre on a household product observed in ordinary use. The actual project still needs school-agreed tools and a model suitable for the planned tests. Ask which workshop resources are available and when a teacher expects the student to move beyond early exploration.

Should a student with strong drawing skills choose HL?

Drawing can help communicate an idea, especially when showing how separate parts fit together. HL students also need to explain production and design decisions, analyse published information and manage the longer assessments. Ask the school which material is added at HL for the current cohort and how the course fits with their other preferred higher-level subjects. Consider an independent written answer alongside the visual portfolio when deciding.

Can a student prepare using a revised-course textbook while taking the previous assessment?

Use the school’s instructions on the student’s registered version, especially for any return to the course. A concept such as ergonomics may remain useful across both versions. The course organisation, exam weightings and internal assessment criteria change. Match complete practice papers and coursework instructions to the registered session. When using an older question to learn a transferable concept, label it accordingly so that it does not become a model for the entire paper.

What should we send when asking about tuition?

Share the school, SL or HL, the exam session and the immediate concern. With permission, bring one independent practice response and the feedback it received. A note such as “can plan ideas but struggles to justify a test” helps a tutor discuss fit more readily than a predicted grade by itself. Ask whether subject support and a suitable group are currently available. EduKateSG class enquiry · Bukit Timah IB tuition overview

Contents · Previous chapter · Bukit Timah IB tuition hub

Other Bukit Timah IB Diploma subject guides

Singapore IB curriculum guide for IB Design Technology